I have a macbook pro, and my hard disc currently crashed. I lost everything on my computer, but luckily I have an iPod nano with all my music saved on it. How can I now transfer my music from my ipod to my mac?
I have a macbook pro, and the hard disc recently crashed. I lost everthing, but luckily i have my music saved on my ipod nano. How can I now transfer my music from my nano to my mac for free?
Hi there ovadia!
You can transfer the music purchased by your iTunes account from your iPod nano to your MacBook Pro by following the steps outlined in this article:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/HT1848
Thanks for using the Apple Support Communities!
Cheers,
Braden
Similar Messages
-
Help would be appreciated
DenholOliver wrote:
Forgot to say the computer will not start up and goes to a white screen.
It's related to your hard drive failure.
White screen means the EFI partition isn't loading and it's the first partition on the drive to load up, EFI contains the gray boot screen.
See this
My computer is not working, is my personal data lost? -
As in the question, everything works fine, but there is a lag with the mouse pointer, latency issue. I have seen on other forums this has been an issue, but with different solutions, and some with no solutions. Matrox technical team have no solutions for me unfortunately, so any similar user experiences would be good.
I have the same issue....
Is there any solution ?
iMac 2010 27" 2.93GHz , OSX 10.6.8 Snow Leopard, Matrox DualHead2Go ME -
HT3964 I have a macbook pro and it randomly will turn off
I have a macbook pro and it randomly will turn off. This happens when the computer is plugged in and when it is not. The condition of the battery says: good.
I borrowed someones charger and after 5 to 10 minutes of charging it turned on. The charger light came on amber and was amber during the entire charge and has been green since. Unlike my charger which would only come on green, or very very dim green no matter what since the batter has died completely. Do you think that this is definitely the problem or is there anything I should check while I have it on and running?
-
i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???
Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?
-
hi i have a macbook pro and when i changed the hard drive the screen wasn't as it was supposed to be it was green on it's side and blurred.what can i do to fix it and what is the reason?
either something got damaged when you installed the hard drive or you need to perform a pram reset (other possibilites could have occured, these are the ones I think)
PRAM http://support.apple.com/kb/ht1379 -
I have a MacBook Pro and can't print pdf files or word documents using my HP Wireless Photosmart Printer. It will print files from the internet. Any suggestions or ideas will be greatly appreciated. Thank you.
Hello, SoonerAnesthetist.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
OS X Mavericks: Solve printing problems
http://support.apple.com/kb/PH14142
Cheers,
Jason H. -
I have a macbook pro, and i want to transfer my hard drive from my macbook (500g), but the display drivers and such are different. How do i do this and is it possible?
The Macbook Pro has Mac OS X 10.4.11 (70g hard drive)
The Macbook has Mac OS X 10.6.8 (500g hard drive)The MacBook's hard drive lacks the necessary hardware drivers to boot the MacBook Pro even though it has a much newer OS on it; that's why simply moving it into the Pro doesn't work. Presumably you have a very old MB Pro, because only the very first MB Pro model (produced January to May 2006) was ever offered with an 80GB hard drive. Are you sure you want to move your big drive into such an old machine? The MacBook must be newer, because the first MacBook was introduced just as the first Pro model was discontinued.
-
I have a MacBook Pro and I opened an email, clicked on the link and then realized it may have not been sent by the person it appeared to have come from, what can I do to ensure there are no problems?
Delete the cookie and cache of any website you visited that you are uncertain about. That's in your browser preferences. What Mac operating system and browser are we talking about?
Did you attempt to download any software from the website, or just visit the link on the e-mail? Or did you attempt to open an attachment on the e-mail? -
i have a macbook pro and i put a 500 gb hard drive but know pro wont start up but when i firewire it to another mac the harddrive seems to be fine
When you formatted the drive, before installing OSX, did you click Options on the Partition and select Mac GUID Bootable ?
Just because it mounts as an external does not mean it's a bootable Volume ... -
I have a MacBook Pro and an 1TB WD my passport for mac. I bought a second hard drive to act as back up and when I went to do this the original passport won't mount. It is showing in disc utility but it will not repair. I am told the mac cannot repair it and I need to back up the files and then restore the hard drive. But I can't open the hard drive to move the files onto the new one!
Help me please. I am not very technical so please answer as if I have no clue!! This hard drive has my iPhoto on it and all my pictures of my son, wedding and my current photography course so I desperate to get it back!
Any help will he appreciated!disk0s2: I/O error.
disk0s2: I/O error.
The MBP's disk is damaged and requires replacement.
Genius Bar Reservations: http://www.apple.com/retail/geniusbar/ -
I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. the same thing happens when just trying to save my pictures from iphoto to a flash drive. suggestions to complete backup please?
Sounds like you'll need to access that drive while it is not booted. You need to replace it anyway, so do that, then one way or another (ext enclusure, et), access it and copy files.
If you keep trying to boot it, you might kill it for good and not get your files, so just swap it out first. -
I have a macbook pro and use BT homehub 3. can't work out how to connect my time capsule. can anyone help? thanks
Just need to plug the TC in to the hub in bridge mode.. do not try and bridge the homehub.. it is not possible with the setup BT uses.
To bridge the TC.. plug it directly into a computer by ethernet.. no other connection to the TC or the computer.
Press and hold in reset until the front LED flashes rapidly.. about 10sec.
Release the reset.
Open the airport utility and setup the TC to bridge mode.
The actual method depends on version of the OS and airport utility you use.
This is version 5.
Sorry I cannot post the v6 as I am on a snow leopard computer now. But you go to the network tab, and choose off bridge mode for method of connection. It will be NAT and dhcp by default.
Then setup wireless.. you have a number of choices here.
Either setup with the same SSID Security and password, as the homehub uses.. or a different name, and password..
Each method works fine.. but you sometimes have issues with wireless channels.. for now leave it on auto and see what happens.. if you have issues lock down the radio channels on both devices.. use one out of the following on each, 1, 6, 11 or 13 in UK.. so say 6 on the homehub then 13 onthe TC.
Update the TC.. unplug fromt the computer and plug it into the homehub.
If you have other issues with the setup tell us what OS you run so we can post suitable screenshots. -
How can I copy my Itunes-library from Iphone to my new Mac, as I forgot to copy the files from the old PC, and now it is to late. I only have music on my Iphone4. Thank you.
gunnarfromhovikFor iTunes purchases only..
Connect the iPhone to your Mac, launch iTunes.
If you haven't done this yet, go to the iTunes menu bar click Store / Authorize This Computer
Now from the iTunes menu bar again, click File / Transfer Purchases From... -
I have a macbook pro and I connected a new iphone to my computer. Somehow all my pictures in the iphoto app deleted. How can I get them back, and no I do not have my TimeMachine On. Please help!
If you are running Lion then all drivers are distributed through Software Update. You do not need to install anything, other than to install the printer in System Preferences > Print & Scan. If you already added the printer while it was connected using USB, you might want to delete it and set it up again wirelessly to avoid confusion. Or, give them two distinct names e.g. "Photosmart D110 (USB)" and "Photosmart D110 (wireless)".
All scanning functions are now performed using Preview, but you can also access the scanner through the same Print & Scan preference pane, or with Image Capture.
This HP document may help explain how driver software is distributed now:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03079365&cc=us&dlc=en&lc=en &product=4144493&tmp_track_link=ot_search#N108
Maybe you are looking for
-
DVD is in Pioneer BDXL Blu-ray/DVD/CD drive USB drive. First screen of installer gives me choice to install as a purchase or a trial. Next screen (purchase or trial) says I have to sign into my Adobe ID. There are no fields in which to enter data.
-
Error occurred in derivation rule
Dear All, After saving the billing document, & it is not realesed to A/c. Document.My client came across the following error; Error occurred in derivation rule. See long text Message no. K/111 CO-PA Characteristic Derivation Diagnosis Step 0031 Categ
-
I cannot open firefox. I receive a message box that states it is already running. It tells me to restart my machine and/or close firefox.
-
When I am trying to change the package I am getting the following error message. Object directory entry R3TR DTEL ZZADJ_PER locked for request/task DEVK900251 How to change the object directory entries which are part of a request/task? Please help. T
-
How to set the password with start-domain instruction in AS 8
Hello, I am trying to add an instruction in /etc/init.d to start a domain automatically every time the server reboots but I have not found a way to set the master password of this domain. I know there is a --passwordfile option but it only has the ch