I have a MacBook Pro and the batter icon has an "X" in it. I attempted resetting the SMC but it's still there. Not sure if the SMC didn't work or I have another problem. Help?
I have a MacBook Pro and the batter icon has an "X" in it. I attempted resetting the SMC but it's still there. Not sure if the SMC didn't work or I have another problem. Help?
You can try the SMC again.
http://support.apple.com/kb/HT3964
Follow directions for a battery you should not remove yourself
You can also try a NVRAM/PRAM reset (at the bottom of the same page in the above link
Also hold the OPTION key and click on the Apple logo in the menu bar and click on system information, in the left column select power. Under the battery info see if it is charging (with the power adapter plugged in) as well as the health info (condition should be normal), and battery installrd (should be YES)
If other than these are different you may want to take it in to a Genius bar for a full diagnosis they will do that for dree.
Hope this helps
Similar Messages
-
I have a MacBook Pro and all of a sudden I cannot get wireless internet connectivity to my router or any other router, I get connectivity through the ethernet port but not wireless. This was working well till this morning
BXB1905 wrote:
I tried the Apple diagnostics it did not work.
What do you mean it did not work! What were the results of the diagnostic tests?
Have you contacted your ISP to determine if the problem is on their end?
Have you changed your router channel? Sometimes this resolves wireless problems.
Your profile confirms you are using Lion. Check out the following:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Configuring 802.1X in Mac OS X Lion and Later -
I have a Macbook Pro and an iPhone5. At one point, I received messages in sync on both devices. Now, I get some messages on the Macbook and others only on the iPhone. What happened?
Associate your mobile number with your Apple ID, if you haven't already done so.
Sign out of iMessage on the Mac:
Messages ▹ Preferences ▹ Accounts ▹ Sign out
and on the iPhone:
Settings ▹ Messages ▹ Send & Receive ▹ Apple ID ▹ Sign out
Then, on the phone, tap
Use Your Apple ID for iMessage
Sign back into iMessage on both devices and test. If there's no change, you may have to wait for a change in network conditions.
Credit for this solution to ASC user SmittyLove and to Glenn Fleishman of tidbits.com. -
I have a MBP and a newer PC .... Both are authorized for my iTunes acount and have current versions of iTunes. How do I copy all of my iTunes library (purchased and uploaded from CDs I purchased) onto the hard drives?
The best way is to copy the iTunes library from your Mac to the PC, so you will move everything, not only your songs. See > http://support.apple.com/kb/ht1751 (You have to do the "Restoring your iTunes Library backup" step on the PC)
-
I have a MacBook Pro and an 1TB WD my passport for mac. I bought a second hard drive to act as back up and when I went to do this the original passport won't mount. It is showing in disc utility but it will not repair. I am told the mac cannot repair it and I need to back up the files and then restore the hard drive. But I can't open the hard drive to move the files onto the new one!
Help me please. I am not very technical so please answer as if I have no clue!! This hard drive has my iPhoto on it and all my pictures of my son, wedding and my current photography course so I desperate to get it back!
Any help will he appreciated!disk0s2: I/O error.
disk0s2: I/O error.
The MBP's disk is damaged and requires replacement.
Genius Bar Reservations: http://www.apple.com/retail/geniusbar/ -
I have a MacBook Pro and have problems using my Facetime. Last time I used it without problems. Now I am trying to use it, and it is asking that I enter my Apple ID. When doing so, it comes up with a message that says, "The server encountered an error processing registrion. Try again later." What does this mean, and how do I fix it? Thanks.
I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272 -
I have a macbook pro and I connected a new iphone to my computer. Somehow all my pictures in the iphoto app deleted. How can I get them back, and no I do not have my TimeMachine On. Please help!
If you are running Lion then all drivers are distributed through Software Update. You do not need to install anything, other than to install the printer in System Preferences > Print & Scan. If you already added the printer while it was connected using USB, you might want to delete it and set it up again wirelessly to avoid confusion. Or, give them two distinct names e.g. "Photosmart D110 (USB)" and "Photosmart D110 (wireless)".
All scanning functions are now performed using Preview, but you can also access the scanner through the same Print & Scan preference pane, or with Image Capture.
This HP document may help explain how driver software is distributed now:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03079365&cc=us&dlc=en&lc=en &product=4144493&tmp_track_link=ot_search#N108 -
i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???
Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?
-
hi i have a macbook pro and when i changed the hard drive the screen wasn't as it was supposed to be it was green on it's side and blurred.what can i do to fix it and what is the reason?
either something got damaged when you installed the hard drive or you need to perform a pram reset (other possibilites could have occured, these are the ones I think)
PRAM http://support.apple.com/kb/ht1379 -
I have a macbook pro and a photosmart D110 printer. I was told that if I load the software for the printer onto my mac that it will no longer print wierlessly. Is that true and how can I scan wirelessly without loading the software? Also, can I just connect my mac to the printer with a cable and scan or do I need that software loaded onto the mac? Thanks for all help!
If you are running Lion then all drivers are distributed through Software Update. You do not need to install anything, other than to install the printer in System Preferences > Print & Scan. If you already added the printer while it was connected using USB, you might want to delete it and set it up again wirelessly to avoid confusion. Or, give them two distinct names e.g. "Photosmart D110 (USB)" and "Photosmart D110 (wireless)".
All scanning functions are now performed using Preview, but you can also access the scanner through the same Print & Scan preference pane, or with Image Capture.
This HP document may help explain how driver software is distributed now:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03079365&cc=us&dlc=en&lc=en &product=4144493&tmp_track_link=ot_search#N108 -
I have a MacBook Pro and can't print pdf files or word documents using my HP Wireless Photosmart Printer. It will print files from the internet. Any suggestions or ideas will be greatly appreciated. Thank you.
Hello, SoonerAnesthetist.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
OS X Mavericks: Solve printing problems
http://support.apple.com/kb/PH14142
Cheers,
Jason H. -
I have a Macbook Pro and have just purchased a GSP hidden objects game. It says on the box that it is compatible and when I try and install it it tells me that installation has been successful. However, it then says that PowerPC games not supported. Help?
No game icon appears on my desktop and I don't know what I can do.
Really ****** off as i've not played these games since switching from a windows PC to a Mac and was really excited!! All I want is to be able to play my new game that arrived in the post today. If anyone can help I would be really really grateful....
The game says that it needs Mac OS X 10.3 or higher to run so I don't understand what the problem is or how I can fix it!!beckyj3,
the last version of Mac OS X which supported running PowerPC apps on Intel Macs was Mac OS X 10.6.8 (Snow Leopard). If you’d like to play this PowerPC game on your Intel MacBook Pro, then you’ll need to install Snow Leopard on it and boot into Snow Leopard. (Note that the last MacBook Pro which natively supported Snow Leopard was the Early 2011 model.)
The game was almost certainly published before Mac OS X 10.7 (Lion) was released, so back then, all versions of “Mac OS X 10.3 or higher” would have supported running that PowerPC game. -
I have a macbook pro, and i want to transfer my hard drive from my macbook (500g), but the display drivers and such are different. How do i do this and is it possible?
The Macbook Pro has Mac OS X 10.4.11 (70g hard drive)
The Macbook has Mac OS X 10.6.8 (500g hard drive)The MacBook's hard drive lacks the necessary hardware drivers to boot the MacBook Pro even though it has a much newer OS on it; that's why simply moving it into the Pro doesn't work. Presumably you have a very old MB Pro, because only the very first MB Pro model (produced January to May 2006) was ever offered with an 80GB hard drive. Are you sure you want to move your big drive into such an old machine? The MacBook must be newer, because the first MacBook was introduced just as the first Pro model was discontinued.
-
I have a MacBook Pro and I have developed eczema on the palms of both my hands and I am wondering if this might be an allergic reaction to nickel. If it is, is there a solution out there so that I can still use my Mac?
-> http://www.ncbi.nlm.nih.gov/pmc/articles/PMC3869443/
"Although none of the 25 iPhones we tested were found to release either nickel or cobalt by means of the spot test in our study, there is a report of an iPhone 5® model testing positive to nickel through DMG testing49 and Apple MacBook Pro laptops testing positive to nickel using DMG in the literature." -
I have a MacBook Pro and OS10.6 and am trying to log into a site that requires me to enter a code from a picture ... problem is all I get on the screen is a white '?' in a blue box. What do I need to display the picture?
Reload the page. If it doesn't load, choose Activity from Safari's Window menu, find that picture in the list, and see what it says to the right; this may reveal what the problem is.
(91827)
Maybe you are looking for
-
How to authorization sales office and sales group in VA21 and VA01 t-code
I need to authorization sales office and sales group in va21,va22,va23 and va01, va02, va03 to control users access the sales order. I found some articles how to resolve this problem.I have created new authorization object Z_VBAK_ VKO, and add these
-
How to move LR catalog from one external hard drive to another
I'm having issues with the external hard drive that my LR5 catalog resides on, and I would like to move it to a new external hard drive. I'm a little nervous to do this for fear of disrupting my catalog. Can anyone give me the steps to do this safe
-
Tcsh shell "alias" command seems to be truncating file names
Terminal Utility: As a Unix geek, on trying to port a large # of tcsh shell scripts to MacOSX (10.5.6), I have found a strange compatibility issue with the tcsh script "alias" command. After entering tcsh sub-shell from bash (by typing tcsh at the ba
-
How do i fix this message? Also, when I ask to search for updates, nothiong comes up and I have not updated my iTunes for a long time. Also, my podcasts have stopped being downloaded. Please help me. thanks in advance
-
Sun V240 Server Warning Light (Amber)
Hi. I have an amber 'Tools' warning light on a V240 Sun server (Sol 8) with an S1 3x Disk array connected. The S1 disk array is fine all disks ok. Can anyone tell me how I can check what the amber light means from a command prompt or any other method