I have a macbook pro, how do i reformat a WD MY PASSPORT 2 TB  external HD

How do I reformat a WD  MYPASSPORT 2 TB

Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Similar Messages

  • I have a MacBook Pro, how to change the computer name in the "Find Iphone"

    I have a MacBook Pro, how to change the computer name in the "Find Iphone"?

    Thank you for help! I was inattentive reading your answer. The thing which confused me was that I noted in blue. I had to just write in a red box and close the configuration window.

  • I have a macbook pro-how do i create address labels?

    I have a Macbook Pro- how do I create address labels?

    Look to the right on this page under 'more like this'.
    Feel free to ask further questions, but then please state what verson of OS X you are running.

  • I have a macbook pro.How do I stop the color wheel from spinning?

    I have a macbook pro.How do I stop the color wheel from spinning? I can not get the computer to shut down w/out doing a force quit.

    I suggest you download and install EtreCheck from http://etresoft.com/etrecheck
    Run EtreCheck and publish report here
    Allan

  • I have a MacBook Pro how can I stop spam mail

    How can I stop unwanted mail, i.e. Bulk mail and spam ?

    You can't, other than by changing to a new email address and then never giving that out to anyone other and very trusted friends and families. All you can do is try to filter such messages. Mail in Mac OS X has a Junk Mail filter, as may your email provider, or you can use a third-party filter. I use SpamSieve and have found it well worth the cost. For identifiable senders, you can also set a Rule in Mail to mark junk messages as Read and move them automatically to the mail trash.
    Regards.

  • I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

    I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • I downloaded an upgrade to my adobe reader today, and ever since my search engine has switched to yahoo and wont change back to google. I have a macbook pro, help please? Does anyone know how I can change this back? I have tried through my settings but it

    I downloaded an upgrade to my adobe reader today, and ever since my search engine has switched to yahoo and wont change back to google. I have a macbook pro, help please? Does anyone know how I can change this back? I have tried through my settings but it doesnt work

    Hi Timia,
    If you are using Safari as a web browser :-
    Open Safari, go to Safari menu > Preferences > General, and put Google as the homepage. Then, choose Google as your default search engine.
    If you are using Google Chrome as the web browser :-
      Open Google Chrome.
      In the top right corner of the page, click the Chrome menu Chrome menu > Settings.
      In the "Search" section, select Google from the drop-down menu.
    Let me know if you still experience any issue.
    Regards,
    Aadesh

  • I have a MacBook Pro and just added an airport express to listen to my iTunes on my stereo. How do I get Firefox to use my AX when I use Grooveshark or Pandora?

    i have a MacBook Pro and just added an airport express to listen to my iTunes on my stereo. How do I get Firefox to use my AX when I use Grooveshark or Pandora?

    If the purchases are all from the same account then you can share the content by authorizing each device.
    If you have separate accounts then you have to be authorized to use the content purchased from another account.
    MJ

  • I have a MacBook Pro 17" computer, and I have a Samsung Galaxy Note 2 phone, how do I get iTunes on my Android device?

    I have a MacBook Pro 17" computer, and I have a Samsung Galaxy Note 2 phone, how do I get iTunes on my Android device?

    You don't get the itunes program on your Android devise at all.
    You would need to read the directions for your phone to learn how to put music on it.

  • I have a macbook pro and use BT homehub 3.  can't work out how to connect my time capsule. can anyone help, thanks.

    I have a macbook pro and use BT homehub 3.  can't work out how to connect my time capsule. can anyone help?  thanks

    Just need to plug the TC in to the hub in bridge mode.. do not try and bridge the homehub.. it is not possible with the setup BT uses.
    To bridge the TC.. plug it directly into a computer by ethernet.. no other connection to the TC or the computer.
    Press and hold in reset until the front LED flashes rapidly.. about 10sec.
    Release the reset.
    Open the airport utility and setup the TC to bridge mode.
    The actual method depends on version of the OS and airport utility you use.
    This is version 5.
    Sorry I cannot post the v6 as I am on a snow leopard computer now. But you go to the network tab, and choose off bridge mode for method of connection. It will be NAT and dhcp by default.
    Then setup wireless.. you have a number of choices here.
    Either setup with the same SSID Security and password, as the homehub uses.. or a different name, and password..
    Each method works fine.. but you sometimes have issues with wireless channels.. for now leave it on auto and see what happens.. if you have issues lock down the radio channels on both devices.. use one out of the following on each, 1, 6, 11 or 13 in UK.. so say 6 on the homehub then 13 onthe TC.
    Update the TC.. unplug fromt the computer and plug it into the homehub.
    If you have other issues with the setup tell us what OS you run so we can post suitable screenshots.

  • I have a macbook pro with a mini display port out and would like to know how to connect the video from my mac to a TV with old RCA input video, or a TV with S-video imput. How can I do this, and do I need a video converter?

    I have a MacBook Pro that I want to hook up the Mini Display Port video out to a TV with RCA video imput, or a TV with S-video iimput.
    How do I do this, and do I need a video converter?
    Dennis

    there's an adaptor for mini dvi to s-video
    a well known auction site would yield results if apple don't stock it

  • Hi. I have a MacBook Pro with OS10.6.8 and cannot get net pages to load on my network at home. I can connect to the internet in work and on other networks. However, some other networks are now starting to fail. Can anyone suggets how I can fix it??

    Hi. I have a MacBook Pro with OS10.6.8 and cannot get internet pages to load on my WiFi network at home. My iMac, iPhone and iPad all work on this network.  It is connected to the net as dropbox registers a connection and so does skype. I can connect to the WiFi in work and on other networks when travelling. However, some other networks are now starting to fail. Can anyone suggets how I can fix it, as the MBP appears to be fine, its updated with all the latest versions of software and the WiFi network is also fine....just not with my MBP??

    Hi. I have a MacBook Pro with OS10.6.8 and cannot get internet pages to load on my WiFi network at home. My iMac, iPhone and iPad all work on this network.  It is connected to the net as dropbox registers a connection and so does skype. I can connect to the WiFi in work and on other networks when travelling. However, some other networks are now starting to fail. Can anyone suggets how I can fix it, as the MBP appears to be fine, its updated with all the latest versions of software and the WiFi network is also fine....just not with my MBP??

  • I have a MacBook Pro, I want to copy Itunes files to an SD card to play in my car, the SD Card doesn't appear in Itunes when I insert it, and I don't know how to convert the files to the correct format, can anyone help?

    I have a MacBook Pro, I want to copy Itunes files to an SD card to play in my car, the SD Card doesn't appear in Itunes when I insert it, and I don't know how to convert the files to the correct format, can anyone help?
    Thank you

    So it seems from reading the COMMAND manual that my first issue is that I used a 16GB SD card, and the manual says it will only recogize up to a 2GB SD card. I did use my MB Air's SD card slot and crated a folder and dragged the music files to it, then to the card. So I am going to get a 2GB card and try that next. Otherwise just stick with the iPOD connected. At least that is 8GB

  • Hi, I have a macbook pro 10.6.8 and an iphone 4s. I have already created an icloud account. I want my normal mails to be saved on icloud. how should i go about?

    Hi, I have a macbook pro 10.6.8 and an iphone 4s. I have already created an icloud account. I want my normal mails to be saved on icloud. how should i go about?

    I'm not sure I understand your question really, but one thing for sure is that you need Lion for iCloud to work.

  • I build databases with appleworks over 10 years on my ibook, and continue to add to them. Now I have a macbook pro. How can I translate the databases to a compatible program?

    Over 10 years I have built several databases with Appleworks. Now I have a macbook pro. How can I translate these databases to a 10.6.8 program?

    Thanks Joe, but that won't work. I've finally found a site that answers the question: http://www.wilmut.webspace.virginmedia.com/notes/aw/page1.html
    I can only say that by Apple I have been royally screwed. I'll never buy another mac -- everything I do would simply disappear into cyberspace.

Maybe you are looking for

  • How to get the last version of flash in MSI format automatically?

    How to get the last version of flash in MSI format automatically? Roberto Neigenfind Bravo Tecnologia www.bravotecnologia.com.br

  • BPM_DATA_COLLECTION fails with (Output device "" not known) error

    Hi all, I have an issue with Output BPM_DATA_COLLECTION_1 job in the satellite system  failing with 'Output device "" not known error.  Since it is collecting data for Solution Manager system why does is it trying to find an output device. It did not

  • Push not working in my app

    W released a Push Enabled app recently. Although several users have purchased the app, we are seeing NO TOKENs being sent to our servers. We are unclear on what is going on? 1. We built the app on the 3.0 SDK application for Device 2.0, but as we are

  • Unable to insert images in this forum using Mac OS

    I was unable to insert images using safari or firefox. I can navigate to the desired image but cannot choose it (its grayed out). Tried files with different extensions such as  .png .jpg .jpeg .tiff .bmp but to no avail. Any ideas?

  • Microphone not working sometimes

    Since my typing skills are not good, I use the microphone for messaging, emailing, reminders, etc.  Many times the microphone is inoperative.  If I try it over and over again, it sometimes begins to work.