I have a MBP Retina - Keys not funcitoning
I have a new MBP Retina - 2.7 GHZ 16 GB Ram.
Every now and then I am having my keyboard lose some key functionality - mainly caps lock, space bar, delete and right arrow, a few others too.
It I have tried creating a new user etc. but it stays the same. It has happened while writing a word doc and today using aperture. In both cases it occurred while flying.
Any ideas
Nicholas Dawes wrote:
Well, Looks like Apple will be replacing my laptop. I have been waiting for the replacement since the end of June, so it is a long wait.
Anyway - what I wanted to tell you is that I have made a dozen flights since first encountering this problem and I have narrowed down the symptoms a little further..... The computer (keyboard) works until the plane reaches a certain altitude and then starts to become eratic and as we climb higher, it fails just as described in my previous post. Then, as we decend the exact reverse occurs... non-functional to eratic to fully functional.
It has to be pressure/altitude related...
Anyway, I am not sure whether I will ever learn what the problem was, but I can't wait for my replacement laptop.. It is killing me not being able to get my work done on long flights....
Anyone else with the same issue???
Thanks,
Nick
Glad that your problem has been taken care of... Now I would be inclined to agree in the pressure/atltitude theory. Actually, I think is the reason why you were having the problem. Going to the MacBook Pro (Retina) specs page, I can see that the operating altitude of the MacBook Pro (Retina) is up to 10,000 ft. I guess you are aware of this but the usual cabin pressure in an airplane when it is at its cruising altitude (around 35,000 ft.) the average cabin pressure is the same as it you were at 8,000 ft. That cabin pressure altitude puts it very near to the operational limits of the Retina MacBook Pro.
Hope this helps...
Similar Messages
-
I have a MBP Retina LCD (resolution 2880x1800) and in the office I use it with a Monitor Sony LMD-2450W connected by VGA. After installing 10.9.2 the resolution in the monitor has been downsized to 4:3 (and 1280x960) instead of its 16:9 display. Anyone know how can I change the resolution manually?
Display shows only 3 different resolution if I choose "scaled" but none use the full area of the monitor.
Thank you
MarcoThis has been an ongoing problem with external monitors that predates 10.9.2. I wrote various tips on different methods here, though the best is probably the hot corner one:
http://applehelpwriter.com/2014/01/25/how-to-correct-the-external-monitor-resolu tion/
(note: this links to my own personal website and is not endorsed by apple in anyway) -
I have a MBP retina and I am having problem when my bluetooth and wifi are both active. My wifi is totally unusable when I am connected to via bluetooth speaker.
Chances are you mis-typed a character in the Wifi password and the devices saved that information. Now whenever you try to connect the device refers to the wrong password and the Jetpack does not accept your connection. Tell your devices to forget the wireless connection and start over.
Once you enter the proper WiFi credentials the Jetpack will allow you to connect. -
I have a MBP retina display, early 2013, 512GB SSD storage& I want to upgrade it into a 768GB SSD storage, would that be possible WITHOUT replacing my current storage disks with the new 768GB ?keeping the 512GB&only adding a 256 GB disk?! please advise (:
The main error in this position is thinking ANY sized SSD can be "storage"
Any Macbook SSD should be idealized as a working platform computer system, containing all your applications, documents, and weekly-use necessary files; and all media files such as ‘big-data’ (music/PDF collections/video/pictures), unless directly needed in the near future, should be kept off the computer and on external storage USB or likewise bare hard drives.
You cant do what you want without removing the internal SSD
Officially, it is not possible for an end user to upgrade the storage in any Retina Display MacBook Pro model after purchase
Get a nice 1TB USB external HD for $65 -
Ok. As I said, my MBP Retina in running BF3 really poorly. I tried the SMC reset and PRAM reset, but doing it EVERY time I want to play does not solve the problem. In many cases it still shows 19 - 28 FPS performance even after the resets.
I really want to know what Apple says about this!
My MBP has 16GB RAM and I am running the game trought the SSD via BOOT CAMP.
Obviously the hadware is strong enought. I even saw some tests on youtube where in high settings the same MBP made 50 FPS average!
Any miracles?
Thanks everyone in advance for any help given.
PS. Apple, if you want, you can pronounce yourself about it!
DanFirst of all. Thank you!
And about Windows, I am following the same procedures as the test I saw on youtube. Original BOOTCAMP drivers.
I'm not really sure if the Windows OS cloud affect it so badly! I mean, the only thing I have there are my games: BF3 and small steam games. Nothing really heavy.
I installed that only for gaming, not even office programs.
Do you belive that my windows version cloud cause this? (even using the same as tested) -
I have the newest airport extreme (AC), the latest Apple TV, and a late 2013 13" MBP retina and I am un-able to mirror over airplay.. it is virtually un-usable.... Is there anything I can do to fix this? You'd think with all the newest/best things I'd have no issues..t
I have lagging sound, significant delay in displays, dropped frames, and sometimes complete un-responsiveness.Lag is typically caused by network interference. You can verify by going to istumbler.net
-
New MBP retina notification not working
Greetings
I bought yesterday my first mac and i am pretty excited. I got my self a mac book pro retina 13 which comes with the latest mac OSX Mavericks.
I must say that i used to hear that mac books are pretty solid and everything works as a charm but unfortunatelly i did found some bugs within the first 2 hours of usage (scroling with trackpad occassionally not working on certain apps) but one of my main concairns is that my notification area is not working.
I have set a twitter account and a linkedin account on the "interney accounts" setting. They indeed appear as small tags on the notification area but appart from that it is empty. I also noticed that on the notification area there should be my calendar e.t.c which are still not there.
Any help would be mouch appriciated.
ThanksThe problem still persists even after reboot... the notification are is sill blank despite the fact that i have configured the apps as it is recommended...no banners no notifications ... nothing :-(
You can see the screenshot below
Should i call apple support ? -
How do I get clearer images after I have saved images on key note
I use Keynote for a scrapbook program as I have yet to find anything that is efficient as it. Trouble is i dont know how to set the pages so they would be 12x12 andafter I print the images out the have lost their true colour and have a blurred effect. Is there something I could do to rectify this
Many thanks peopleIs there something I could do to rectify this
Definitely, use a dedicated photographic printing application.
Keynote is a fantastic video based presentation application but its not designed for high quality output to print. It can produce handouts and notes for lecturers, but as it does not have a print module dedicated to correctly scaling photographic quality image printing, it is the wrong application to use.
For viewing and printing, you would be far better off placing all the original images in individually labeled folders, then use Preview (in the Applications folder) to view and print the images.
If you want the best printing software under the sun for the Mac, get Adobe Lightroom for £60, cheaper if you buy on Ebay. It will catalogue and print all your images to any size and format. -
Apple Keyboard + MBP -- F# keys not remapped
I just got an apple keyboard, and expected that when it is connected (usb) I would see the new key-mappings for exposé, brightness, etc.
I have the latest keyboard drivers.
Do i have to select the new mappings? I went into keyboard shortcuts and selected "restore defaults", but it changed nothing.
Thanks,
MattFigured it out -- had to deselect "use all F1, F2, etc. keys as standard function keys".
-
MBP Retina shows wrong resolution on external display since 10.8.4
I have a MBP retina and I'm using it with an external display, Dell U2711, connected via a Mini-DP to DP cable. It all worked amazingly well until 10.8.4 came out. Now, when I connect the display, it no longer shows the correct 2560 X 1440 resolution, but shows 1080p. The displays preferences pane does not allow going over 1080p. It does recognize the display model, though.
It started with one port. The machine has two TB ports, so one of them worked fine and the other didn't (the one closer to the user was acting up). Then it degraded further to the second port. Now, if I plug and unplug several times and fiddle with the displays control panels, I might just get it right eventually. It takes some time, but eventually the machine gets it right. At least that's what I've been experiencing in the last few days.
I don't think it's a hardware issue. It's possible that my cable is at fault, but I seriously doubt that. I'm wondering if anyone else got the same problem, just checking before I go and splurge on a new cable (these cables are not easy to find).
Thanks,
ZThis worked for me:
Step 1: Delete system windowserver preferences
In the Finder, from the menu bar, select "Go -> Go to Folder..."
Enter: /Library/Preferences/
Delete the file called com.apple.windowserver.plist
Step 2: Delete user windowserver preferences
In the Finder, from the menu bar, select "Go -> Go to Folder..."
Enter: ~/Library/Preferences/ByHost/
Delete all files that start with com.apple.windowserver (On my rMBP, there was one file called com.apple.windowserver.12AFB147-95D6-5C70-8F62-C1E4F2BE81BE)
Step 3: Reset the PRAM (These instructions are fromhttp://support.apple.com/kb/HT1379)
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
MBP Retina trackpad unable to primary click
I have a MBP Retina which is only a few months old. The last few weeks my "primary click" function on the tackpad has only been working intermittantly. Initially, I switched it to "tap to click" and that seemed to fix the problem. Now tap to click doesn't work either. I can still move the curser normally. Interesting thing is my "secondary click" works fine (ie two finger tap). More interesting is that both my bluetooth magic mouse and trackpad have exactly the same problem (no primary click/tap but secondary works fine). I have tried other accounts and the recovery mode and still have the same issue. Luckily I can screen share from my wifes computer so I still have access to my files. I called applecare and tried a few reboots holding down various keys but no help. Applecare thinks its a harware problem but I suspect it is software as the bluetooth devices are behaving the same way. I have already updated to the newest sotware 10.8.3.
Any suggestions??On the built in trackpad do you hear a audible click when you press down on the trackpad?
I think it is more of a software problem. Especially since both the built in trackpad and the magic mouse does the same thing. A hardware fault would not effect both the built in trackpad and a mouse, of any kind, the same way.
For a test do a clean install of os x on a external drive, that is a clean fresh install of os x not a copy of the install on your internal drive. Then boot the system from the external and test both the internal trackpad and MM for the same problem. If you no longer have the problem then it is software related with the install of os x on your internal drive. If you do still have the problem then it is hardware.
Only apple, or a AARC, can fix hardware problems by diagnosing the problem and replacing the part or parts that are faulty. -
2014 Retina Thunderbolt Not Recognizing Drives/Devices
Hi,
I purchased a new retina Macbook Pro about two weeks ago and notice that the thunderbolt ports don't seem to be recognizing two different drives. The ports work with displays but when connecting an OWC powered drive and a lacie bus powered drive neither will work. I have also tried to connect a thunderbolt to Ethernet adapter and am not having any luck with that either.Just wondering if you ever found a solution. My mbp retina is not finding my iLok 1. No green light. Max 5 won't authorize.
-
MBP Retina fan spinning while CPU is idle
Hello,
We have 2 MBP Retina in our household. I purchased mine shortly after it came out, my GF's laptop is just a week old. During heavy CPU usage the fans become noticable. I know this from my laptop only when I do things like encoding videos. However, during normal use of Safari and OUtlook I never ever hear the fans. On my girlfriend's laptop however the fans kick in a few times during the day while she is only using safari. One might say that she looks at flash heavy sites, which is not true. She was just reading BBC News like ma at the same time, and I could hear her fans spinning. The CPU usage on her laptop was around 5%.
Not sure why this only happens on hers. I have a ton of stuff running all the time, and I never hear the fans spinning in my MBP.Thanks for the tip. I entered the command and it states: Processes at 158 total, 4 running, 2 stuck, 152 sleeping, 887 threads. Load Average 1.18, 1.37, 1.32. CPU Usage 2.31% user, 4.18% sys, 93.7% idle. Running at the same temps as shown above. I reset PRAM, restrated computer, etc. Unless I only have one window open doing one thing, it gets very warm per the temps noted in my original post.
-
Hi guys
I have a MBP retina 15" with yosemite 10.2.2, yesterday, I saw the screen full of lines, it could be a problem of the vga-video?
I also have the same problem in this moment..this are the screenshot of yesterday and now..
I finished the two year warranty 1 months ago..what can i do?
How can be expansive?
Thanks a lot!Hello Mr.lollo14,
I would not be able to tell you how much it will cost to get your MacBook Pro and that will be something you will need to discuss at an Apple Store or an Apple Authorized service Provider. Take a look at the article below for more information about setting your Mac up for service.
Service Answer Center - Mac notebooks
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=Macn otebooks
Regards,
-Norm G. -
Movies are always scaled down on a MBP Retina
Hello,
I'm having right now a really stupid problem i can't get fixed:
When trying to watch a 1080p file (1920x1080; MP4 or MOV) with quicktime, it always scales the video down.
Since I have a MBP Retina, it should easily fit into the screen without scaling it down. However, when I press cmd+i to get information about the video in Quicktime, it says:
Format: H.264, 1.920 x 1.080
Current Size: 1.422 × 800
The video is fillig up almost the whole screen, so I can't manually make it larger. Also, the "Original Size"-function (cmd+1) is greyed out.
Is there any way I can watch it in true resolution? Without scaling it down?
I'd really appreciate your help!
Thanks"Aktuelle Größe" means "Current size"
Maybe you are looking for
-
Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i
-
Print the result of an ABAP Program (in an infoset) in a ABAP List viewer.
Hi , Here is my question : I have created an user group in SQ03 I have created an infoset in SQ02 and a query in SQ01. In my infoset I have a piece of program which looks like that : SELECT EVVERTRAG EVBSTATUS EVANLAGE EVVKONTO EV~EINZDAT EVAUSZDAT
-
Hi simple file content conversion to FCC
hi all.. iam practicing one fcc to fcc . source and dest str is as follows... send_dt +send_rec ++send_str vno
-
Applescript: If A 1 and 10 ?
Applescript: If A>1 and <10 ? Is this possible with any syntax? set theSize to 1500 set sizeTag to "" tell application "Finder" if theSize > 1024 and < 2048 then
-
How to call Edit- Auto-Blend Layers ?
Any idea how to do this via scripting, or if it's even possible? Much appreciated