I have a mpeg file I want to edit in Final Cut Express. How do I best go about importing this file? I assume I must find a way of converting it....?

Use MPEG Streamclip to convert it. Depending on the type of file you might need to purchase the MPEG-2 playback component.

Similar Messages

1080p30 .mov files from canon eos 5DMarkII in Final cut express 4.0.1

Hi everybody.
i need some help to import HD vidéo .mov files from Canon Eos 5DMarkII in final cut express.
The files is in 1080p30 (h264) like avchd but in the final cut configuration i have only 50i and 60i option in HDV and AVCHD
Final cut necessity to do a render (5h for 15min on my G5) and the movement quality is not the same.
Anybody have a idea to import Progressive files in final cut ?
maybe they have an update with new avchd 1080p codec in configuration ?
or i need final cut pro...?
Thanks in advance
and sorry for my english...i'm french

There is no good solution for working with this camera in FCE. It's 30fps progressive. There is no true video format that is 30fps. This is something Canon was cobbled together for this stills camera.
You can use MPEG Streamclip to convert the material to QuickTime using the Apple Intermediate Codec at 1920x1080. I think that's what it shoot. You should check the camera manual to confirm it shoots 1920 and not 1440.
The problem is the frame rate. You can convert it to 29.97fps or to 25fps. 25fps conforms to the European frame rate, but I don't know how well Streamclip will do this conversion. You also need to make sure the material is not interlaced by Streamclip.
The other problem is that FCE handles 1080 as an interlaced format, because for production it's supposed to be an interlaced format, at least in the formats, HDV and AVCHD, that FCE works with. You can set your sequence properties to have no field dominance, which should prevent it interlacing during compositing of any effects.

HT2948 I have a Sony DCR-PC100 is it supported by final cut express?? wilth

I have a Soney DCR-PC100 is it supported by final cut express ?? what 'p' will they convert to??

Hi
Just my notes - for iMovie - but they go to 99% for FinalCut too.
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited. No Camera or A/D-box
• GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

Made a 2 minute edit on Final Cut Express but at the 30 seconds (after I exported), there's a clip showing up that is not in my project, a clip i don't want in there, a glitch, how can I correct this problem? I don't want to start over again :(

Basically, I have 2 problems:
1) When I export it shows this clip that's not in my normal project and it ruins my project by having this clip in there; it's like a glitch. I tried to change the clip, and and still doesn't make the project normal again. Tried a new sequence and dragging the project into HD Mode and to no avail.
My camera:
HD: 1080p
Settings: At Hd
2)
Also, it's only displaying black bars above my project, even after exporting at 720p. I just don't want this random clip in my project or the black bars. I'm using Final Cut Express. Does anyone have any possible idea what this could be? Any help woud be much appreciated! I'm clueless on this.
IS ANYBODY OUT THERE? : )

1) Is it a video clip? Something you recognize? To be clear, it's displaying at a point in your exported movie but doesn't appear at all in the sequence?
2) What are your sequence settings? Right-click your sequence and choose "Item Properties" to verify.

Importing Quicktime Files to Edit in Final Cut Express

I just bought final cut express to edit quicktime files I receive from work. FCE will not let me import certain files and I get a message saying "Error: File Type Unknown", but what's weird is I CAN import some files that are the EXACT same file type!
I have noticed that one difference in these files is that the icons in Finder are different. The file I CAN import is usually the default quicktime movie icon, while the ones I CANNOT import usually have a video thumbnail for the icon. Does this mean anything?
The files are the same. Same codec, same frame rate, same dimensions, everything but the video length & icon view finder are the same.
Please someone assist me with this or I will have to return FCE and start saving up for FCP I suppose.

I couldn't do this action, I don't have Quicktime Pro. Should I invest in this? What does it mean if the Audio and Video aren't the same settings? Can I change them with Quicktime pro? Thanks!

How do I update my old MacBook to the newest operating system, but want to clean it out thoroughly first (without losing my data). How should I best go about doing this?

Hi everybody. I have a MacBook that's about five years old. I want to buy the newest operating system so that it runs better (because currently it is struggling), however I would like to clean up all the old software before I do that. I want it to be as clean and new as possible before I buy the new operating system, instead of just downloading it ontop of all of the rubbish I must have accumulated. I also want to keep my data (documents, photographs etc). Would anybody be kind enough to provide me with a step-by-step (can be as concise as you like, depending on how much time/effort you have to explain!) guide as to how I might go about doing this myself? Any help would be greatly appreciated. Thank so much guys.

Step number one - Back up all your important data!
Seriously, it sounds like you are working without backups. Don't ever do this. Hard drives fail, it is a fact of life. Don't be one of those who get caught without a backup. An external hard drive, burning it all to DVDs, or online backup will save you frustration and money.
Two - don't expect a new operating system to improve performance. Get the computer running as best as it can before you upgrade. You may need more RAM or a bigger hard drive.

Final Cut Pro X keeps crashing after trying to import .mov files

I don't know if I have an corrupted .mov file that is making it mess up, or if final cut just cannot handle the movie type. I also tried to import .MTS files into final cut, that may have affected something. Please help!

So there is a single file that you think causes others not to import? .mov covers a lot of possibilities. Where did these clips come from?
Russ

I have a document, bookmark.htm, that I exported from IE8. How do I get Firefox to import this file. Simply telling it to import/ie doesn't work

I'm using Win 7-32. I think the problem is that Firefox is looking in the wrong place for my bookmark.htm file. How can I direct it where to look

Use the method shown in the following link, you can then point it to the bookmarks file - https://support.mozilla.com/kb/Importing+Bookmarks+from+an+HTML+File

I have just installed my new final cut express 4 and when I try to import a photo it quits unexpectedly? Why is this?

What should I do about this and does it need to be reinstalled?? Please Help??!!

As you give no info about formats, sequence settings etc. and how you are actually trying to import it is impossible to guess.
Please give as much information as possible as there are countless configurations and permutations of settings you may be using.
You could try trashing the preferences with this free app for a start http://www.digitalrebellion.com/prefman/

How to Encoding MPEG Movie to be able to import into Final Cut Express

I have MPEG Movie video clips that were sent to me. Title dvdMovie1chapter26.mpg (21.6MB) given to me from a PC taken on dvd video camera and compiled on CD disk. I would like to edit in Final Cut Express 4.0. I can not import in present form. Have used HandBrake and Toast 8 to encode. Divx and AVI to grainy. Have tried to make QuickTime Movie but 21.6 MB file went to 115.6 GB. Not sure how to set QuickTime options (Formats-Audio-Video Setting) in Toast 8 to encode with good quality this file so I can import into Final Cut Express. I will not have enough disk space to do all the video clips at 110 GBs or more per file. When I drag this file into Toast 8 with DVD-Video selected the file come into Toast as a Video-MPEG-2 720x480 29.97fps and Audio- Dolby Digital, Stereo 48000Hz File. Any Ideas?

How long is the movie? DV is 3.6MB/second. Handbrake is no good for this. I don't know if Toast will do it, but you can try MPEG Streamclip. You want to export to QuickTime using the DV NTSC codec at frame size of 720x480 and 29.97fps.

What is the best product for converting MTS files (NOT on camera or in root directory) for editing in Final Cut

Hello all,
I have read the forums and know that I cannot use the Log and Transfer function on Final Cut Express 4.0 for my AVCHD files (from my Panasonic HC-V700) AFTER I have transfered the files out of the original root directory. Unfortunately, I did not know this until recently and I have a bunch of old footage in .mts form that I copied onto my harddrive WITHOUT the root directory. I now must get it into Final Cut Express 4.0.1. and I would like to use a Log and Transfer style program so that I can select what I need and erase the rest. I know about the program VoltaicHD which can be used for this purpose. I have not yet purchased it, but I will if this is my best option. The downsides to it are that it takes a lot of time to process the files (i hear from this forum) and that it creates extremely large files (hearsay from this forum, though I would like to know just how big those files are and how they compare to the size of files final cut creates). When I tried the trial version, I also noticed that unlike the log and transfer function in Final Cut Express 4.0.1, you cannot capture multiple subclips from a single clip. Well you can, but you have to load the clip into the viewing window again, which is not ideal.
I would love some more advice on this. I imagine other people have made this same mistake and have had to figure their way out of it.
I was also wondering is it possible to use Final Cut Express's Log and Transfer program directly from files if they are in a different file format. So far my experiments with this have failed. But if this is possible, I suppose I can also just convert all the backlogged files wholesale into a format that Final Cut Express supports more easily for Log and Transfer (What file format would this be? Sorry I am new to this). My new harddrive has a lot of free space, so I could probably handle the huge amount of storage that this would require for the raw footage and then I could erase it after I log and transfer just what I need. In which case, do folks have recommendations for a file convertor. I am dealing with over hundreds of files and I don't think the free online convertors would work. This product has been suggested to me, but I know very little about it.
Thanks!
Mira

I am also finding, when I use Voltaic trial version, that the quicktime movies it creates are of inferior quality than those created through log and transfer into final cut express and imovie, particularly during rapid movement. There's a lot of visible lines running horizontally around areas of rapid movement (not sure what the lingo is for this).
Anyway, now I am getting accustomed to the idea that my best bet is probably just a high quality converter to get my mts files into something more useable by final cut. At this point, I am willing to sit through the render time that it will take on final cut express while I edit. I am just trying to get my footage into workable format without losing quality.
Thank you!
Mira

Need to find a way to convert mts files to aFinal Cut compatible format --

I hired someone to shoot something for me recently and he used AVCHD. However, he only copied the mts files and did not save the entire folder structure, which unfortunately is what Final Cut requires (at least that's my understanding of it). Basically I need to find a way to convert mts files into a Final Cut compatible file format.
Any ideas out there? Thanks in advance.

Forum search is your friend. The usual answer you'll find is ClipWrap, transcodes .mts to whatever flavor of ProRes you want.

Convert mts files for editing in Final Cut?

Is there a way to convert mts files for editing in Final Cut Express or Pro?

Well, first, if you are talking about AVCHD video, FCE & FCP can directly import it from your camcorder. They will also import AVCHD from an SD card or even your hard drive provided you have saved the entire AVCHD folder structure, not just the .mts files by themselves.
If you only have the .mts files (without the surrounding AVCHD folder strucutre) then you should be able to use MPEG Streamclip to convert them to QuickTime/Apple Intermediate Codec for editiing in FCE. MPEG Streamclip is free and works great.
If that doesn't work, then look into ClipWrap, which has a $49.99 price tag.
This will work the same for converting .mts files to ProRes assuming you already have FCP installed, which gives you the ProRes codec.
FCE & FCP do not, however, directly import video from DSLRs because the camera manufacturers have each done some proprietary stuff in their implementation of video in their DSLRs. However, if you have a Canon DSLR & FCP (that is, FCP 7) there is a Canon EOS video plugin that will enable you import the video directly from the DSLR into FCP7. Not sure it's supported on Lion (10.7.x) just yet, but if you have a Canon DSLR it's worth a look.

Final Cut Express file format - audio problem

I have some .mov files created from a screen capture session that I need to edit in Final Cut Express.
They were saved in .H264 format and I need to convert them to one of FCE's native formate. I THOUGHT I could do this by exporting in the DV/DVCPRO - NTSC formal in Quicktime Pro (7). However, I do not have an AIFF option in the audio. So, when importing into FCE, I can see the video in my timeline, but the audio needs to rendered. Is there a way I can get the video with the native audio format?
Thanks,
DR

Well, that took care of the sound problem. However, the video is not right. It is displaying at a very slow frame rate, and does not keep up with the audio.
My workaround so far is to convert it to dv musing MPEG Streamclip. Switching to "re-sample at 48000 hz" is not working, but once I import it into FCE, I can render the audio and cut using that.
Not the most elegant solution, but it works.

How do I open my Final Cut Express 4.0 files in Final Cut Pro 10.1.3?

Hello,
I used Final Cut Pro when I was in college and when I graduated in 2010, I bought Final Cut Express 4.0. I recently bought Final Cut Pro 10.1.3 two days ago and I am having trouble opening up my old Final Cut Express 4.0 files. When I do go to open up these files they only open up with Final Cut Express and I always get the message: file's format is too new for this version of the application.
How do I open these Final Cut Express 4.0 files in Final Cut Pro 10.1.3?
Thank you!
Anna

TThere is no way to go directly from FCE to FCPX. If you know somehow who has FCP7, they can open the FCE projects and export XML files. These can be converted to FCPX XML format using the 7toX utility.

I have a mpeg file I want to edit in Final Cut Express. How do I best go about importing this file? I assume I must find a way of converting it....?

Similar Messages

Maybe you are looking for