I have a new iMac cannot find how to access my files in Dreamweaver

I cannot find how to access my files, as I am now using Yosemite and it is all a different layout .
can anyone get me started please
Clicking on the cloud icon is no help

Copy the entire /Music/iTunes folder to /Music/ on the new computer.
That is all you need to do.

Similar Messages

HT4623 i have an ipad2 and cannot find how to upgrade to ios 6, despite visiting apple site, itunes etc. Apple is normally intuitive but this is a real labarynth?

i have an ipad2 and cannot find how to upgrade to ios 6, despite visiting apple site, itunes etc. Apple is normally intuitive but this is a real labarynth?

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

HT201250 I have done my back up using time machine, now I have a new mac and I need to access the files that I had saved from my old mac. How can I do that?

I have done my back up using time machine, now I have a new mac and I need to access the files that I had saved from my old mac. How can I do that?

Use Migration Assistant on your new Mac:
Click Continue:
On the next screen, choose your Time Machine backup disk.
Don't bother to migrate Applications unless you know they will work on your new Mac. For example, PowerPC applications won't work. Just migrate your user account which will copy all your photos, music, movies, and other documents.
Note: you will not be able to migrate the information to same account in which you are already logged in. Migration Assistant will tell you that and recommend what to do. It can migrate the information to a new account, but you will have to give it a name you might want to change later. One way around this is to create a temporary account, log in to it, and run Migration Assistant which will replace your normal account. Then, log out of the temporary account, log in to your usual one, verify everyting works as you expect, and delete the temporary one.
All this can be avoided when you set up a brand new Mac by running Setup Assistant which essentially does the same thing to create your new account, but most people are too excited to do that and elect to migrate later.

New imac--Cannot find imovie

I bought a new imac over a month ago and i cannot find imovie. I have iDVD, itunes, iphoto but not imovie. did a search on finder and all and i cannot find it. Where could it be?

That's strange. I thought all new iMacs had iMovie pre-installed and in the Applications folder as part of the iLife package. Mine did.
Maybe for some reason it wasn't installed for you and you have to do from the installation disk. Failing that get back to where you bought it from and complain I guess.
Hope you find it.

I want to view yesterdays history. I have recovered the files but cannot find how to access them.

When I click on history I do not see yesterdays files

see the following Q&A for ideas and suggestions:
[https://support.mozilla.org/en-US/questions/960171 Google Earth plug in is not recognized by Firefox (works in Safari and Chrome)]

Installed iTunes 11.4.0 and cannot find how to view files created by apps or screen displays for moving icons. Where did it go?

I recently installed iTunes 11.4.0 and cannot find how to view the files created by some apps on my iPhone (and iPad). There appears to be no way to view them as there was in the previous version. Also can't view screens and icon positons to manipulate them in iTunes. Any one no how to find them, or if they have been purposely removed from 11.4.0?

First, take a deep breath ... enjoy life.
Upgrade to the latest version 1.4.1. It's a free upgrade. It however will not alleviate your frustrations.
You can move a directory in Lr by clicking and dragging to a new location within the Folders panel. To create a new folder on a new drive ensure that no folders are selected (hint: click All Photographs in the Catalog panel) then click the + icon in the Folders panel. You will be presented with a dialog to choose or create a new folder.
To move selected photos to a new directory first select the images then right click the destination folder. You will be presented with several options including moving to the destination folder or creating a new folder under the destination folder.
You can also move images outside of Lr. Review these links:
http://www.adobeforums.com/webx/.3bc42055
http://livedocs.adobe.com/en_US/Lightroom/1.0/help.html?content=WS46FF9C0B-36EA-4271-B1D0- 07B6B46EE011.html
http://photo.net/bboard/q-and-a-fetch-msg?msg_id=00NqWO
http://luckhurst.wordpress.com/2007/08/21/lightroom-with-an-external-hard-drive/

Problems setting up my TC. Have just bought new iMac(OS 10.6.8) and TC. I set it up. iMac cannot find it. I have tried direct connection with an ethernet cable to Mac or my wireless router but nothing. Just a flashing orange light. Help for a simpleton p

Problems setting up my TC. Have just bought new iMac(OS 10.6.8) and TC. I tried to set it up. iMac cannot find it. I have tried direct connection with an ethernet cable to Mac or direct to my wireless router but nothing. Just a flashing orange light. Help for a simpleton please. Have tried reseting TC, but to no avail.

Just updated from 10.6.7 ---> 10.6.8 and had the same issue. Despite having done a clean install from 10.6 and got everything back off my TC, now Time Machine can't find it!
Green light is on, ethernet cable conected, network CP says its conected but nothing. Airport Utility can't find it. Hit reset button, Orange flashing light but still no show in Airport Utility.
But I know its there, as rebooting from 10.6 SL disk shows the backups are still ok?
Hmm, ideas anyone?
SBB

I have a new iMac running iTunes 10.4 in OS 10.6.8, and a new Mac Air running iTunes 10.4 in Lion. I was able to transfer all my music etc. from the iMac onto the Air, but cannot figure out how to get the Playlists from the iMac to the Air. iTunes Help

I have a new iMac running iTunes 10.4 in OS 10.6.8, and a new Mac Air running iTunes 10.4 in Lion. I was able to transfer all my music etc. from the iMac onto the Air, but cannot figure out how to get the Playlists from the iMac to the Air. iTunes Help says File >Library >Export playlist and choose XML, or to save a copy of all your playlists, File > Library > Export Library, "the Exported info is saved in XML format." Then it says, "to import an iTunes playlist, File > Library > Import Playlist". Now I am assuming I do that import part on the Air, but when I try it doesn't recognize anything that can be imported - what am I missing??? Aside from a clue...

Thanks, Jim, for taking the time, but the reply is unfortunately vague in the exact area of my confusion! "you need to copy that file to your new computer..." Well, the Import/Export instructions make it seem as if the two computers should be able to communicate this file thru wifi, but that's the linkage I can't seem tocreate with Import/Export. Should I instead email a copy to myself (thats what applecare suggested)? Copy it to and from a thumb drive? But then place the file where? And the article was helpful, but should I be trying to move the Library file or the Library.xml file (as iTunes Help suggests)? Sorry to be so clueless about it...I suppose I buy Apple in the hopes of not having to think about this stuff, which approach seems not to be serving me well. Thanks again for your time!

I have a new imac with imovie 11 however my hd everio camcorder will only work with imovie 8 or 9 how do i download imovie 9? all i can find are updates and my mac says i don't need it

i have a new imac with imovie 11 however my everio hd camcorder will only work with imovie 8 or 9. i tried to download imovie 9 but my mac says i don't need the update. How can i download imovie 8 or 9 complete not the update?

I really appreciate all your help. Today I spent some time on the problem. First I purchased any video converter from the ap store and then I connected the camera to the mac with the original usb cable that came with the camera. I turned on the camera and selected backup on pc and the logo came up on my home page. I opened it and after several attempts i found the 3 video files that were on the camera. I then converted them from a tod file to mp4 and then transfered them to imovie. Now I have to figure out how to send the video to youtube or move it to an external hard drive which I have not been able to do. So far I am not too fond of imovie 11. If you could send me the download for imovie 6 I then could try that route. When talking to apple support yesterday about the problem they suggested to get Final Cut Express. It's 200 bucks so before i order the install disc i would like to try your suggestion. My email address is [email protected] Again I thank you very much for your help! George

I just ran migration assistant, and now I have two accounts on my new iMac...how do I merge my iPhoto libraries?

I just ran migration assistant, and now I have two accounts on my new iMac...how do I merge my iPhoto libraries? Is there anyway to do it without using an external hard drive?

Yes there is.
1: Log out and into the account you later want to remove.
2: Open your Pictures folder and look for the iPhoto Library.
3: Right or control click on it, a menu appears and choose the option "Show Package Contents", it's really a folder.
4: Find the folder called "Originals", select it and use the Finder menu to Duplicate it.
5: Move the Copy of Originals to the Desktop. Close the window.
6: From the Finder menu, select Go Computer.
7: A window appears with your boot drive, double click it and on the Users folder inside.
8: Select the OTHER users folder and open the folder called Public, inside is a folder called "DropBox"
9: Drag the Copy of Originals to that DropBox folder, it will copy it.
10. Log out and into the other account and access the DropBox folder, your files can then be imported into that iPhoto user Library from within the program itself.

I have an iMac 5.1 which is running OSx10.5.8 - it runs very slowly and I can't find if there is a particular problem. In the process, I have tried to install 10.6 [I have a new iMac] and the 5.1 won't accept the install discs.

I have an iMac 5.1 which is running OSx10.5.8 - it runs very slowly and I can't find if there is a particular problem. In the process, I have tried to install 10.6 [I have a new iMac] and the 5.1 won't accept the install discs.

As you have discovered... you cannot use the install discs from another Mac...
Re the iMac running OS X 10 5 8... and for your New Mac...
See Here for keeping your Mac Happy...
http://support.apple.com/kb/HT1147
http://www.thexlab.com/faqs/maintainingmacosx.html
http://www.thexlab.com/faqs/performance.html

I have a new IMAC with a Maverick platform (I can update to Yosemite). I did all graphics on a G5 Power PC (very old), in Freehand (very old)... How can I open old Freehand files on this new Mac? Can I still open and work in Freehand on this new Mac?

I have a new IMAC with a Maverick platform (I can update to Yosemite). I did all graphics on a G5 Power PC (very old), in Freehand (very old)...
How can I open old Freehand files on this new Mac?
Can I still open and work in Freehand on this new Mac?

Let me see if I've gotten this right! You want to remove an account from BOTH machines? Do this for your new machine first, then for the other.
Click the Apple logo on the top left of the screen, System Preferences, Users and Groups (under Systems), unlock the lock in the window if its locked (you need to know the password), select the user that you wish to remove, and click the - sign next to the + sign for Login options. A window will pop up with some options. Select Delete this user and securely, and click 'Delete user'.
After this, do an update from the App Store.
Thats all there is to it.
For the other machine repeat the process except for one thing. Before you delete the user in this case YOU, you will have to give Administrator priviledges to your son bu checking the box 'Allow user to administer this computer'.
Do NOT do anything from Finder ... if you dont know how to fix the consequences of the problems caused.
There is no need to unauthorize your iTunes account on your new machine. Do it on the old machine though.

I have a new IMAC 5k running Yosemite and when I log in I am asked a whole series of questions as to what keychain can access. How can I authorise all of these to be available upon login? Items concerned are such as "Talagent", "Messages agent" etc

I have a new IMAC 5k running Yosemite and when I log in I am asked a whole series of questions as to what keychain can access. How can I authorise all of these to be available upon login? Items concerned are such as "Talagent", "Messages agent" etc

Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
          Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
          Keychain Access ▹ Preferences... ▹ First Aid
There are four checkboxes in the window that opens. Check all of them. if they're not already checked. Close the window.
Select
          Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.
If you use iCloud Keychain, open the iCloud preference pane and uncheck the Keychain box. You'll be prompted to delete the local iCloud keychain. Confirm. Then re-check the box. Follow one of the procedures described in this support article to set up iCloud Keychain on an additional device.

HT1386 I cannot find how to keep previous photo albums loaded on Ipad when syncing new ones with iTunes. The old ones are wiped out every single time

I cannot find how to keep previous photo albums loaded on Ipad when syncing new ones with iTunes. The old ones are wiped out every single time

If it's not too late, see Recovering your iTunes library from your iPod or iOS device. As long as you have a backup of the device when the device still held your photos you should stand a chance of recovering them using a tool such as iPhone Backup Extractor.
tt2

I have a new iMac and i created two libraries on iTunes. how do i copy songs from one library to the other?

I have a new imac. I created two libraries, one for me, one for my kids. how do I copy songs from one library to the other library?

Not easy unless you're just content with adding some files to the other as new files but lose playlists for those files, and playcount, and ratings, etc. If you're okay with that, you can drag the media folder from one library to the other. If you use default settings and want to duplicate the media, just drag it. If you want to add the media but leave it where it is currently located, hold down the option key while dragging to the library window.
Otherwise:
PowerTunes - http://www.fatcatsoftware.com/powertunes/ (commercial software)
syncOtunes - http://homepage.mac.com/oligrob/syncOtunes/syncOtunes.html

I have a new iMac cannot find how to access my files in Dreamweaver

Similar Messages

Maybe you are looking for