I have a new laptop.I can get my old imported emails but not new emails. where do i go to find them.
I used to have Outlook on my old laptop. I have a new laptop and have installed Mozilla Thunderbird for my emails. My IT friend put all my emails from my old laptop onto a memory stick and then imported them onto my new laptop with your Mozilla Thunderbird. I can now see all my old emails that were imported from the old laptop but i can`t seem to find where my new emails are located when i open up the Mozilla Thunderbird. Hope you can help. Thanks
Did you already set-up your account in Thunderbird?
I'd assume your Outlook email messages now appear underneath the 'Local Folders' account in Thunderbird. Is that correct?
Similar Messages
-
Any suggestions on how to get wifi to work? I have a multitech router and can connect with a computer wirelessly but not the ipad.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398 -
Can get sound thru i tunes but not on internet
can get sound thru i tunes but not on internet
You are welcome.
As best as I can recall, the MacBook will try to remember your settings.
You can test it out - just hook your machine up to the TV and use it as a second display. Try some sounds.
-charlie -
I have a hp officejet 4620 e-all-in-one printer. I can get it to print, fax but not scan.
Product #CZ152A
Ran scan utility to fix problem
Downloaded driver as requested
Still keeping an error message and won't scan from my computerWhat operating system does the computer use?
Is it connected by USB or over a network?
If over a network, what brand and model is the router? Is it wireless or with an Ethernet cable?
Do you receive any error messages?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
Problem with NAT? can get to web server internally but not externally
We are trying to setup our helpdesk software website so external users
can access it. However, we have been unsuccessful. We don't have any
issues accessing it internally from our 10.1.1.X LAN
We have had our ISP setup a public DNS "A" record of
customerservice.amerinet-gpo.com which resolves to 198.88.234.40 and that
appears to be working.
Next we added a NAT to our Firewall to take 198.88.234.40 traffic and put
it to the local IP of 10.1.1.23 which is our local address for the
webserver running the helpdesk software.
We also made sure that BM filters are allowing traffic on ports 80 and
443 to the local IP as well.
We have 4 other webservers (on a separate servers than our helpdesk
software website) that are exposed to the outside in this same manner and
all work fine.
The helpdesk website is on Windows 2003 server SP1 running IIS 6.0. Our
firewall server is NetWare 6 SP5 and BM 3.7 SP3.
I have tried to just telnet to the public IP of 198.88.234.40 on port 80
and it times out. I can't understand why, and have checked my entries on
BM and even deleted and re did them 3 times to make sure I didn't make a
mistake. I even have another web server on that block NAT'd the same way
and it works (198.88.234.36), if you telnet to it on port 80 it goes
right away.
What else can I try? Any insight would be greatly appreciated!
Thanks,
SCOTT> > ok, the easiest way to calculate valid addresses is to use an IP
subnet
> > calculator. The one I like the most is the free utility by Wildpackets
> >
http://www.wildpackets.com/products/...tcalc/overview
> >
> > Anyway, with a 255.255.255.248 network mask the valid IP addresses
> > associated to the primary address of your BM server are in the range:
> > 198.88.234.33-198.88.234.38
> > therefore .40 isn't included. Actually .40 is the subnet identifier
of
> a
> > separate subnet. The addresses from .33 to .38 are the ones you can
use.
> >
> > --
> > Cat
> > NSC Volunteer Sysop
>
> I was mistaken, the subnet for that block is 255.255.255.240 so I was
> told by our ISP that our range was is 198.88.234.32 to 198.88.234.47
or
> 14 usable IPs since first and last are unusable.
>
> We have 3 different IP blocks from our ISP, the above 198.88.234.32 one
> with the 255.255.255.240 subnet, then a 199.217.136.184 with
> 255.255.255.248 subnet and finally a 198.88.233.1 with a
255.255.255.248
> subnet.
>
> So I think we should be able to use the 198.88.234.40 address.
>
> SCOTT
>
I was really hoping that we had the wrong sub net in BM for the
198.88.234.32 block! When I read your post last night, I thought that's
gotta be it...sadly I checked and it does have it as 255.255.255.240 when
I look in inetcfg under bindings. I even checked our Cisco router as
well to make sure it had the sub net correct since this is the first time
I've tried to use an IP above 198.88.234.36. The router looked fine as
well. Is there anyplace else that this could be wrong, maybe a config
file on BM or something?
Thx,
SCOTT V. -
Well I get into msn hotmail can look who is sending me messages bit can not open the message?
Hello Steven Gordon1,
The article linked below details how to utilize the Connection Doctor in Mail to diagnose and correct issues with your mail accounts.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
Cheers,
Allen -
I have Windows XP laptop. Can I get the photos Saved on the iPad1 iOS4.3 from emails and websites etc. Onto my laptop as backup or in case I want to delete the photos from the iPad?
It never seems to synch fully with the laptop?Ivon, when you are satisfied that you have successfully imported the new folders to the iPad you can go back (as I have described above) and delete the originals of those you copied out in order to avoid 'duplication' and also save space.
The method I have described also has advantages over creating new albums within the Photos app on the iPad since it 'duplicates' the photos and only permits the deletion of all so called copies. King_Penguin is correct when he states you can copy out photos originally taken with the iPad etc.
Alan -
Hi, just bought my daughter an Iphone 4s and I can't get it to let her on youtube, Facebook etc., keeps saying no internet connection. My husband and I have 3G smartphones and we can get on them on ours, so I'm not sure what I'm doing wrong. Also, my other daughter has the same phone and has no trouble getting on these sites either. Any information to help is greatly appreciated. Thanks
Well, did you activate this new phone?
-
I have hp 430 laptop,how can i re install the windows 7, if i not have original window on my laptop
I have hp 430 laptop,how can i re install the windows 7, if i not have original windows on my laptop. i have oem number,
But i have troubol to finishing installation of window.Originally the Notebook will have the Recovery Partition and that would give you an option to create a set of Recovery Disk. If you have not created those Recovery Disks when the Notebook was in working condition we cannot do that right now
As of now if you need to recover your Notebook with the new Operating System you can check if the Recovery Partition is in a working condition or not, If yes you can easily recover/restore your Notebook
If Recovery Partition is corrupted
You need to call HP Technical Support and request for a set of Recovery Disks , So you can recover/restore your Notebook at the earliest
OR
You need call up Microsoft and purchase an Operating System with the License Key, So you can recover/restore your Notebook at the earliest
I strongly recommend you to Contact HP Technical Support over the Phone for further assistance without any delay
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP -
I'm new to GB and I'm trying to record solo vocal with a backing track. I can get the track running OK but I can't seem to record. I think when I press record the backing track mutes and I need it running.. Thanks in advance!
guess what it says java file. So yes i'm sure. Sarcasm. Not the best way to encourage a total stranger to help you. Then there's
Sorry if i wasn't more clear but was that response needed?No it wasn't needed, but I'm not the one asking for help so I have the luxury of not worrying too much about it. It's extremely frustrating trying to drag relevant information out of someone, and makes one less inclined to bother.
Anyways, there's still nothing in this thread that actually explicitly says "there is a file called VolcanoApp.java in the directory where I'm running javac from" and I really can't be bothered banging my head against the wall any longer. You've made a silly mistake, or a false assumption. We all do it from time to time. My advice is, take a break, go for a walk and re-visit this in a while. You'll probably spot the mistake right away. -
I can open some older numbers files but not other. I get a message saying I need a new version of numbers. Why would some files open and not others?
SK,
Here's the deal. If you ever open a Numbers file with Version 3, the file is converted to Version 3 and can't be opened again by Version 2. Version 2 and Version 3 are undoubtedly both on your machine and they look so similar that you may not realize which you are using. So, there are two steps to getting into trouble.
1. Open a Numbers 2 file with Numbers 3, edit it and Close it.
2. Try to open that file with Version 2. You ill get the error.
To always get it right, find the file you want to open in Finder, Right-Click it and choose Open With... and pick Version 3 from the drop down list.
If you have a file that you prefer to use only in Version 2, always use Open with... Numbers 2.3.
Jerry -
Got a new LG in Anchorage and was told Glennallen, AK is in a service area. Got home and all I get is Message 41, Roaming.
I can make calls with WiFi connection but not on the road. Any idea whats going on?Oh no! I'm sorry to hear you had problems in the are you're in AkJohnDye. I checked your coverage and I do see we have an extended 4G coverage. This means you're able to use your phone but it needs to be activated in a 4G LTE Verizon Wireless coverage zone. I apologize.
AdaS_VZW
Follow us on Twitter at @VZWSupport -
what do i need to connect my mac book pro to the tv with the mac's thunderbolt port to hdmi? I have the newest macbook pro. I'm wanting to have the best picture I can get from my 1080p tv. thanks
Thanks Community! I solved the problem. In fact it was not a problem but lack of understanding. These guys at Apple are way ahead in thir thinking. I will try to explain as short as I can.
In Lion, ihe Prefferences/Display show only two choices: 6-7 steps of resolution and some color tab. No two screens, no two display to overlap, nothing for us to do. "That was the problem"! Everything is automatic.
When I connected the HDMI cable to the Miniport into a T-bolt slot, the TV screen showed the "spiral galaxy" how Zyriab is calling it. In fact he gave me the best clue. That shows the connection is good. But where is the Mac Book image?
You have to drag it to the right out of the Mac Book display area, and "voila!" it will continue on the TV screen. The same with the mouse pointer, push it out ofthe Mac Book display area and you see it on the TV sreen. Good image, you can keep the max resolution, etc. The sound is still on the Book's speakers. I have to figure that out.
Thank everybody, especialy Zyriab, ne was the closest.
High regards to everybody -
I have a 60 inch Sony XBR TV that has DVI input but not HDMI. I am using an adapter to get the video from my Apple TV to the Sony, but the screen flashes a lot. Do I have any other choices other than buying a new TV?
Is this an iphone question?
You have posted in the iphone forum. -
I no longer have any of my pcs that I had registered on iTunes and I am at my limit on the number of registered devices how do I unregistere old machines that I no longer have so I can get my old music that I have down loaded.?
Go to your account in the iTunes Store and look for the De-authorise All button in your account's details. Use the De-authorise All and then authorise the PCs you still have.
Maybe you are looking for
-
Text messages come up as phone numbers instead of names - even though they're in my contacts.
i updated my 4S from iOS 5 to iOS 5.0.1 and all of my contacts transferred, but now all of my text messages come up as phone numbers instead of names - even though they're in my contacts.
-
JSP import directive does not work
We are using WebLogic 5.1. We have a problem with our JSPs. The jsp compiler could not find the Connection class until we said java.sql.Connection. We had a valid import statement! We had <%@ page import="java.
-
I work for a very small publishing company. My boss has given me a list of nearly 3000 emails of people to send our monthly deadline notice to. I've discovered that our email lets me send an email to only 65 or so addresses at a time. In the past I m
-
Deleted ringtones still on phone
I recently deleted a few ringtones from my iTunes library and from my computer. When I went to sync my tones the ringtones I deleted are still there on my phone. I tried checking and unchecking ringtones and re-syncing but nothing is working. I have
-
I know there are few methods for positioning in Lumia. Even user guide list those: GPS, GLONASS, A-GPS, Wi-Fi, or network (Cell ID) based positioning. My problem is that how the user can control the use of those - or know what is used and how accura