I have a new MacBook Pro that prints fine with my upstairs computer, but the IMAC will not print through the AirPort
I have a Canon printer (USB), in my office. I plugged it in to the back of the Airport Router. The downstairs new MacBook Pro can print with either of my two printers upstairs with no problem. The IMac upstairs can not see the Canon printer at all. When I go to Print & Fax settings, it does not see the printer! How can I solve this?
THANKS!
You will need to get on the Canon website and download the latest drivers for your printer on the iMac.
That's really about all that you can do.
Similar Messages
-
I have a new macbook pro 2,6Ghz i7, 8GB 1600 Mhz internal ram, but he will not boot from an external disk with operating system Snow Leopard.
These Macs shipped with 10.7, and will run nothing older than that:
MacBook Pro
Date introduced
Original Mac OS X included
(see Tips 1 and 3)
Later Mac OS X included
(see Tip 1)
Mac OS X Build(s)
(see Tip 2)
MacBook Pro (Retina, Mid 2012)
Jun 2012
10.7.4
11E2068
MacBook Pro (15-inch, Mid 2012)
Jun 2012
10.7.4
11E2617
MacBook Pro (13-inch, Mid 2012)
Jun 2012
10.7.4
11E2617
MacBook Pro (13-inch, Late 2011)
Oct 2011
10.7.2
10.7.3
11C74, 11C2002, 11D2001
MacBook Pro (15-inch, Late 2011)
Oct 2011
10.7.2
10.7.3
11C74, 11C2002, 11D2001
MacBook Pro (17-inch, Late 2011)
Oct 2011
10.7.2
10.7.3
11C74, 11C2002, 11D2001 -
I have a new macbook pro that did not have a disk, OS X lion 7.3.4 was pre installed so how can i change the administrators name and password, it did not migrate properly from my hard drive.., now there is some mysterious administrator name and or password??
See #5
Step by Step to fix your Mac -
Hi,
I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
So please suggest proper direction to use it and provide link to install any driver.
Thanks
Tauheed AhmadYes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and 3.0 knowledge. They handsUp that reason I posted my problem in this forum.
So is there any better solution to use any mediator between these USB version handling, Please let me know.
Thanks
Tauheed -
My MacBook Pro didn't come with a recovery CD and recovery HD will not show up
My MacBook Pro didn't come with a recovery CD and recovery HD will not show up
if you're running Snow Leopard - there there will be no recovery partition - only Lion and Mountain Lion has that.
did you buy your Macbook used?
you can call Apple to order the original install DVD for your Macbook or you can order Snow Leopard for $20. -
I have installed Adobe Creative Suite 5 Master Collection on a 2nd computer but now it will not accept the seriall. What can I do? I'm using a fresh install of windows 8.1
What exactly means "will not accept"?
-
Ok so I recently got a new MacBook Pro and my external hard drive will let me see what I have on it but wont let me save. It worked fine with other MacBook Pro's with snowleperd but dosen't seem to work with my Mountian Lion.
Open Disk Utility
Select the external drive
Then read the parameters for that drive
Allan -
Does anyone have a new MacBook Pro that makes a buzzing sound on startup?
My new (60 days) MacBook Pro makes a buzzing sound on startup- does anyone else have this issue? Thanks!
Keep at the Genius Bar.
For one, you have a default 1 year warranty, which you do not want to let expire.
For another, that chine is a critical part of the system, that for some is an annoyance but at least it sticks around.
At some point, they have to either fix it or give you another (at least in my opinion they will eventually have to give me on that chimes).
Make a very good clone before you go back in. CarbonCopyClone ($40 download). You will need to clone it back onto a new system eventually, I suspect. -
My wife has just had a new iPad and while the Wifi works fine at home, at work she is unable to connect after entering the correct password etc. The 'waiting wheel' simply spins next to the network attempting to connect. The iPad version is 5.1.1 and not the IOS 6 which seems to be problematic on the Wifi front. To add to the mystery my own iPad connects fine to my wife's place of work. Is it possible to take the manual settings from mine and connect that way? Or any other suggestions?
When your device is trying to connect to the work Wi-Fi network, go to Settings > Wi-Fi > then tap on the name of the Netowrk that she is having trouble with. Then tap on forget this network. Let the device attempt to connect again and make absolutely sure she is trying to connect to the work network and not a nearby network, then make absolutely sure the password is entered correctly.
-
I wake the computer from sleep and then it freezes either within 5 minutes or it could take an hour.
Try to repair disc permissions. Also see if MSOffice is compatible with Lion.
-
What is a great 1TB portable hard drive for a new macbook pro that works great with lightroom?
I want to keep all my photos on the portable drive while working in lightroom. Is there much speed difference between USB 3 and thunderbolt?
You might want to take a look at the LaCie Rugged series.
You can get it in both USB 3 or thunderbolt....yes, thunderbolt is easily 2-3x faster than USB 3.
Tom -
I have a new Macbook Pro hooked up to a new Belkin wireless router. I can connect to the internet without a problem. I have an HP officejet printer hooked up the the router to work wirelessley, The router is reading it as connected. My computer reads it as offline. If I reset my computer it will print whatever the first thing is in the que but nothing else and does not work after that. Is there some sort of setting that I am missing? I am trying to set this printer up to work wirelessly from three mac laptops in my house but I can't even get it to work on one right now. Any help would be awesome
Mac OS X 10.7 Help: Troubleshoot a network printer
-
I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing. There is a check box selecting "picture" which has been checked - but no picture. This worked fine on OS10.7.5. Problem??
First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
I have a new Macbook Pro and an old Canon ip Pixma 8500. I have downloaded the software from Canon but my printer settings will still not register it. Looks like I can print a colour calendar but not a letter!
Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel? Is Parallel in fact the best way to go?
First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.
Maybe you are looking for
-
IPhone 3G update to 3.0 with repeated 1013 errors - now bricked iPhone! ;-(
Attempting to update an iPhone 3G to 3.0 from 2.2.1 and it's now a brick. Note that I've tried this now from THREE different computers, two macs and one windows box with identical results. I've uninstalled iTunes on the windows box before doing the u
-
Wireless Internet ONLY Does Not Work With MacBook
I am really frustrated with my internet situation. I have been in a new apartment for three weeks. I have a Motorola Surfboard cable modem, through Charter, hooked up to a Cisco Linksys E1000 router. The internet TYPICALLY works very well for both my
-
How to get the Bookmarks in pdf file by using pdf.js library
In my application i am using PDF.js library to view the pdf files. Now i want to fetch the bookmark details which was already set in the pdf page. How could i get the those bookmark details by using pdf.js library. is there any specific methods avail
-
JTabbedpane with JRadiobutton?
I have a JTabbedpane with 2 tabs (tab1, tab2). I have 2 radiobutton (JRadioButton). So for now, i want to when i click on radiobutton1 it will be show tab1 when i click on radiobutton2 it will be show tab2. Here is my source code, please help me to s
-
Hi, In most FI extractors, I see Value type (mapped to 0vtype) and version (mapped to 0version). Can anyone please explain the difference between them? Can you please share examples? Thanks Jason