I have a Photosmart C7280 and have question s about making a network decision.

I currently have two desktops connected to a wireless router via ethernet cables.  They are connected to a single (non-HP) printer with USB cables through a USB switch.  Two laptops connect to the router wirelessly.  I could replicate the existing configuration with the C7280, but the idea of a network in which the laptops could participate is very appealing.  One of the laptops is running Windows version 7, the other computers are running Linux.  If I go for an ethernet network, will the laptops be able to connect to the printer through the router?  If I go for a wireless network, will the desktops be able to connect to the printer through their ethernet cables?  A couple of USB wirelss adapters are a possibility.
This question was solved.
View Solution.

I understand that you have some questions regarding networking with your printer.
Yes, wired network connections will have no problem connecting to a wifi connected printer.  Most routers bridge wired and wireless networks to work as a single network.  There are a few routers that separate wired and wireless networks, but these are primarily enterprise grade routers and networking equipment.
A wired desktop will be able to print to a wireless printer as long as it is connected through the same router.  Vice versa, a wireless computer can print to an Ethernet connected printer as long as it is the same router. 
I recommend using a network setup for the printer, if possible, to avoid printing issues.  USB hubs have been known to cause some printing problems, though this is not always the case.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

  • I have a HP Photosmart C7280 All-in-One Printer and want to print from my ipad

    I have a HP Photosmart C7280 All-in-One Printer and want to print from my ipad's and my iphones at home...  My printer is set up to print wirlessly on my Network.  I need to know is there a firm wear update i can get or a good app to install so i can print?? 

    hi there, 
    This article should have everything you need to get started . Check it out and let us know if it helps.
    Best of Luck! 
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • I have a HP Pavilion dv 2000 laptop and an HP Photosmart C7280 wireless printer.

    I have an HP Pavilllion dv2000 laptop and an HP Photosmart C7280 wireless printer. They have worked well together until I reformatted and added Windows 7 on the laptop. I went online and downloaded the Windows 7 Printer Wizard. It recognizes my printer and says it has been installed. I have followed their directions and plugged USB cable into printer from laptop.  It prints that way. How can I get this to print wirelessly?

    You can phone HP to order a set.Choose your country here> Contact HP
    Or they are here>>http://www.computersurgeons.com/SearchProducts.aspx?sbt=dv9260nr&bkm=Results#Results
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • I have a hp photosmart c7280 all in one and i get a message that says "pump motor stalled.

    I have an HP photosmart C7280 All in One and I get a message that says pump motor stalled.  I have done everything from resetting and turning it off.  I have checked to make sure that there is not any paper jam.  It makes a clicking sound after it has been reset and then the message "pump motor stalled" pops up.  Any suggestions or should I just toss and buy new???  It is only three years old but it is out of warranty.

    You might try the suggestions in this post.  There is also a post here that reports success.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • I have an HP Photosmart 8200 and and Epson Artisan 800 printer and neither one is showing up in my printer selection any more.  How do I get these back?

    I have a MacBook Pro that came with Mac OS 10.7 Lion on it, and had been printing on both an HP Photosmart 8200 and an Epson Artisan 800.  I had an issue where I would print from Photoshop and every time I would print I'd need to make a new printer.  I don't think that it was ONLY WAY, but it worked for me.  Anyways, I finally got tired of scrolling down the list to choose the new printer  – HP Photosmart 8200_23 – or something like that, so I deleted some of the printers that had extra numbers.  This is where the print Print & Scan dialog in the system prefs has the little plus and minus.  It turns out that I pressed the minus on everything - going overboard with my clicks.  Now, I have NO PRINTER and each time my computer tries to download drivers from HP and Epson, they have no updates for me.  When I go on there website there are no drivers for Mac 10.7.  I have no idea how to get my printers back.  Any ideas or assistance would be greatly appreciated.
    Thanks,
    Erik Jurado

    Download the HP drivers here:
    http://support.apple.com/kb/DL907
    Download the Epson drivers here:
    http://support.apple.com/kb/DL1398

  • I have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

    i have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

    You just need a powered hub.. if you already use one then fine.
    Plug in just about any external hard disk will work fine. Format has to be readable by the TC.. ie fat32.. or much better HFS+.. plug it into a Mac to prepare the drive.
    Pick whatever size suits.. nowadays 2TB are most economical.
    WD, Seagate have goobled up all the minor players.. so pick one.
    Whatever suits your budget and asthetics.
    NOTE.. The USB on the TC is fine for printers.. IMHO it is the wrong way to go with USB disks.. use the internal disk of the TC.. USB is less than half the native speed plugged into a Mac.. TC to USB is slow.. far slower than internal drive.. or using external drive as external.

  • I no longer have access to the back up email address I used when I set up my apple ID. I have since forgotten the answers to my security questions and am having a problem making changes to my account. What can I do?

    I no longer have access to the back up email address I used when I set up my apple ID. I have since forgotten the answers to my security questions and am having a problem making changes to my account. What can I do?

    You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (114957)

  • I have purchased music with my old apple id, old computer and old email. My old email and computer are not available anymore and I dont remember my password and securtiy question anymore. How can I authorise my old apple id to authorise the new computer?

    Hi, I have a new computer and new apple id. I've purchased music with my old computer, email and apple id.
    I cant access now the previously purchase music, because it wants to authorize the new computer to play the
    music. I cant remember password and security questions for my old id and the old email doest exist anymore.
    What can I do?

    Hi, Carmen. 
    Thank you for visiting Apple Support Communities. 
    If you need to reset you security questions, do not know the answers and no longer have access to that email account, see the last sentence under Note in step 5.
    You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
    Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need tocontact iTunes Store support in order to do so.
    Rescue email address and how to reset Apple ID security questions
    http://support.apple.com/kb/ht5312
    Cheers,
    Jason H.

  • I'm not sure if I am writing this in the correct area (this is my second attempt at posting a question), but I have a comment about a recent store experience in Sandusky, OH.  I am not a current Verizon customer, but I was visiting friends and we had to g

    I'm not sure if I am writing this in the correct area (this is my second attempt at posting a question), but I have a comment about a recent store experience in Sandusky, OH.  I am not a current Verizon customer, but I was visiting friends and we had to go to the store to get something taken care of.  First off, allow me to compliment the nice, new store.  Boy, its changed over the past few years ago when I was in last. My comment is mostly directed to one specific employee.  When we entered the store, we were "welcomed" by a sloppy dressed gentlemen (his clothes were probably two sizes two small), which really struck me as unusual because every other employee in the store was dressed really "casual" with nice sporty clothing and red shoes.  Either way, after being entered into the computer, the gentlemen told me to wander around or have a seat in the back and someone would be with us soon.  As soon as we walked away from the door, the gentlemen handed his "duty" off to another employee who took over welcoming people coming in.  For whatever reason, I felt glued to him as he stood out to me.  After leaving the door, he immediately went to the back of the room, hunched over a cabinet, where he stood for the next 30+ minutes playing on his phone, frowning and not speaking to anyone around him.  Again, I found this unusual because everyone else was overly friendly and smiling.  I finally decided to walk by and see what he was doing.  It appeared that he was texting someone.  He paid no attention to me whatsoever as I walked by, just continued to frown and text on his phone.  I did take not of his name tag for future reference.  His name was Justin.  I am assuming he's the manager of the location as he was just standing around while everyone else worked.  I do understand that managers aren't necessarily doing the "dirty work" of the employees, but he could have at least found some better fitting clothing (I find it hard to believe Verizon doesn't supply it), been a little friendly, pretended to be busy, and not been texting the entire time we were there.  Again, the store was great, the other employees were very helpful, but the manager seemed to be doing is own little thing and it didn't put off a good image for the rest of the store.  Just wanted to share my comments.

    lisab101,
    We appreciate you reaching out to us. We greatly appreciate the feedback that you have provided us. Please know that we will lift this up to management and the issues will be addressed.
    Thank you,
    RobinD_VZW
    Follow us on twitter @VZWSupport

  • I have a hp photosmart B110 and a macbook air how do i print double sided? i have gone into system preferences but there is no option to change the printer preferences to double sided and i have printed double sided before with my old dell laptop

    I have a HP photosmart B110 and Macbook Air I need to print double sided but there doesn't seem to be any options on the system preferences to change to double sided, I was able to print double sided with my old laptop which was Dell and allowed me the option under printer preferences but there is no option for that either i use pages for my documents and download documents through my university andy help appreciated

    My HP Officejet Pro 8600 plus has dual sided printing
    HP 5550dn Lost double sided printing with Mavericks driver

  • I HAVE A HP PHOTOSMART C4700 AND I CANNOT CONNECT IT WITH MY IPAD 2 TO PRINT

    I have Photosmart C4700 and want to print from IPad Air 2. Is my printer airprint? If not, is there a way to print from the Ipad or will I need to get a new printer? If I need a new printer...do you have a list of suggested printers that would be similar to the one I have that IS airprint. This printer is used in a cabin seasonally and the cost of replacing cartridges is a factor as we never use one up, but it dries out as the printer is off 8 mos of the year in cold climate. Thanks.

    Hi,
    Your printer is not airprint enabled but you should be able to use the HP ePrint app on it.
    The most straight forwad way to print wirelessly using the eprint app is to make sure that both the ipad and the printer are connected to the same wifi network.
    Once this is complete, download the HP eprint app and print from within the app. Once everything is connected to the same network, you'll see your printer from within the app and be able to print to it.
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Want to upgrade from Tiger to Leopard and have questions...

    I recently purchased an Airport extreme after my previous router/wifi unit went up in smoke. Had to use the PC with XP to set it up as the iMac has 10.4.11 and I supposedly need 10.5.x to setup the airport with the iMac. From reading the upgrade specs and system requirements, it appears I have no issue upgrading... just have to find a copy of Leopard. There in lies my question, as copies are no longer available from Apple (per what I was told at the store, and don't see them on the web), if I buy a copy off ebay or Craig's list, unless I can find a brand new sealed box.... do I take the chance of buying a copy that somebody installed, and now the serial number is registered and therefore is no good anymore? How does that work, is the serial number of the software registered to the machine serial number and once used, the disk is worthless on another computer? I realize that there are "family" copies and developer copies with what, 5 licenses and unlimited? What about the standard "retail" package, once it's installed it's worthless to anybody but the person that originally used it?

    There is no serial numbering/registration. This is not Windows. You are on your honor.
    You always take a chance purchasing from eBay and Craig's List in as much as most of these sellers do not know what they are selling and/or miss-represent the item. Can't tell you how many folks come here trying to install an OS unsuccessfully only to find out that they bought a machine specific OS version that the seller swore would work on their Mac.

  • I have new printer Photosmart C410 and osx10.4.11. What do I need to do to make them work together?

    I have new hp printer Photosmart C410a and Mac osx10.4.11. What do I need to do to make them work together?
    My computer is:
      Model Name:    iMac
      Model Identifier:    iMac6,1
      Processor Name:    Intel Core 2 Duo

    Here is what you need to order:
    http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
    Hope you are backing up anyway, but be sure you have an up to date backup. Repair permissions in Disk Utility, then restart from the Snow Leopard disk you buy (in the above link) and do an upgrade (only changes the OS), not a clean install (which wipes all data). Others on here may chime in on their thoughts on how best to do this, but I've never had trouble over 20+ years doing it this way. If you aren't having crashes and strange problems now you should be fine. Please write back or start a new thread (you'll get more help than continuing in this thread which has printing problems in the header) that has something like "Need help upgrading from Tiger to Snow Leopard" that will attract more help.

  • TS3297 I cannot purchase music currently as I am being asked to answer security questions due to it being " the first time have bought from this PC". This is not the case, I have not changed my PC. I have changed my passowrd and security questions but no

    I cannot buy music currently as I am being asked to answer security questions due to it being supposedly "the first time I have bought form this PC". This is not the case. I have now changed my password and security questions, but it is asking me the same when I try to buy again.

    First off, the name of your computer is only the way it is becuase the Apple user is the first one they created after repairing the Mac. Go into Sharing System Preferences and change the name to whatever you like.
    Can you explain how you did this:
    This didn't seem right so I went in to it and changed the computer so that it would recognise me as the Owner/Administrator.
    You can delete the Apple user in Users & Groups System Prefs. Select that user and delete it. It will ask if you want to save the user data or delete it. If you archive it, you can always delete it later and it will be available if you need to recover that account for some reason--I doubt this will be necessary. After deleting the account, and when you feel you are still working normally, you could delete that archived user folder.
    I have also never seen anything ask for that. It does sound like an Epson thing, but without having access to it, I couldn't tell you for sure.
    Here's what I would try. Create a new User and give them admin rights. Log in as that user and see what happens with the installer. If it still complains, it is an Epson issue. My guess is it is looking for user id 501, the first user created. If it works, then something is indeed odd about your account. If so, use that new admin account to disable Admin privileges for your account, then re-enable it. This is done in the Users & Groups system prefs.

  • I have what is hopefully a quick and easy question. I kno...

    I have what is hopefully a quick and easy question. I know almost nothing about this stuff so go easy on me . All I need to do is find out if my DHCP is enabled. I'm having problems with my Xbox 360 and one of the possible problems is this DHCP thing. However I have no idea how to find the settings for my router on my computer. If it helps I have a Wirless model BEFW11S4. Thanks in advance for any help.

    You need to access your router to check if the DHCP is on.  To access the router open your browser and type in http://192.168.1.1 into the address field and hit enter.  That should open the routers log on screen and by default the user is left blank (some routers it is admin) and the password is abmin.  If you changed your routers password as you should for security reasons then use that password.  That will bring you to your routers user interface and on the main set up page should be your DHCP.
    Richard Aichner (Ikester)

Maybe you are looking for