I have a problem in using the function 'WS_DELIVERY_UPDATE'

I want to update the delivery document at the batch field (CHARG = '0000000605') by using the function 'WS_DELIVERY_UPDATE'.
Before update, this batch field is initial.
After having completely updated this delivery, I try to update this batch field again. However, I found the error message showing that 'Confirmed batch 0000000621 is different from batch 0000000605 for main item'.
How can I solve this problem to update this batch again? This error occurs when I use function
'WS_DELIVERY_UPDATE', 'BAPI_OUTB_DELIVERY_CONFIRM_DEC', and 'BAPI_OUTB_DELIVERY_CHANGE'.

Check OSS 674567.

Similar Messages

I have a problem in using the new apple ID in my iphone 3GS

i have create a neew apple id but while downloading anything it stands at default and get stops? to make my new id as default wat should i do?

Hello Saif,
Thanks for using Apple Support Communities.
I found a support article that has some troubleshooting steps for your to follow through in order to resolve the issue of not having a cellular connection on your iPhone 5.
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/TS3780
Take care,
Alex H.

Help me - I have a problem of using the javax.smartcardio

Hi everybody!!!
I'm creating an application to communicate with javacard.
I searched on internet and know about javax.smartcardio.
But I can not use it, even it's inside the default library of Java 6.
I already import the javax.smartcardio.*; to my java file.
But it can not find the class inside this package.
Can somebody help me? Thanks a lot.

Hi everybody.
I got the advice from Mr. Safarmer on this forum.
So:
If you're using Eclipse to develop the application.
You have to set the JRE Library to Alternate JRE.
Below is the instruction for dummies like me ^^:
Go to Build Path > Configure Buil Path of your project
In Libraries tab, Edit the JRE System Library
Instead of choosing the Execution Environment, we choose Alternate JRE (usually jre6)--> This is my case. And i did it.

Hi fellow apple guys, i have this problem. Hope you can help me. I don't know how to use the function keys (F1 to F12) on my macbook air. Pls help

Hi fellow apple guys, i have this problem. Hope you can help me. I don't know how to use the function keys (F1 to F12) on my macbook air. Pls help

Out of the box, to use the function keys as function keys, hold down the fn key when you press the key. Otherwise, you get the picture function on the key. You can reverse this behavior in the Keyboard system prefs.

Hey i hav an hp pavilion g series n i would like to kno how use the function keys without having to

hey i hav an hp pavilion g series n i would like to kno how use the function keys without having to click on the fn + function key

Hi,
You can change this in your system bios as described in the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02035108&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

search google for "iphone remove picture from contact"

I have a photo of an ice surface and another of a flower. Now I want to create a merged photo with the flower lying under the ice. I understand that I shall use the function "Layer" and have even read in the manual and looked on a video, but that informat

I have a photo of an ice surface and another of a flower. Now I want to create a merged photo with the flower lying under the ice. I understand that I shall use the function "Layer" and have even read in the manual and looked on a video, but that information is not sufficiently detailed for me. I have tried several options, but I come now way. Generally it seems that your information is only for the ones who can, not for the people who can´t although it is we who really need to learn. Please give me a step by step (click by click) information on how I can get the ice above the flower and then make the ice partly transparent so the flower is seen underneath. Please send me an e-mail Erik Solbu [email protected]

Open a new document big enough for your image. Then additional open your ice and flower image as well. Copy each and paste it into your blank document. They will be placed on their own separate layers.
Make sure in your layers panel. (Bottom right) the ice is above the flower, by dragging it in place. In that same layers panel click the ice layer to select in and find the opacity meter above. Drag to the left until you get the effect you desire.

I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4) A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4)
A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

Sounds kind of stupid, but check to make sure that your iphone case cover is not blocking the edge of the camera lens. I had a silicone case on my 3S and when it got older, it started tot slip and the edges of my pictures were blurred.

I have an ipod touch 3rd gen.I used the function of erasing all content and settings and now i am stuck on this screen with the apple logo and a loading sign for the past 17 hours.CAN SOMEONE PLEASE HELP!!!!!!!!!!!!

i have an ipod touch 3rd gen.I used the function of erasing all contents and settings and now i am stuck with this screen showing the apple logo and the loading sign for the past 17 hours.CAN SOMEONE PLEASE HELP!!!!!!!!!!!!

Hold down the on/off button and the home button for 20 to 30 sec, when the iPod starts and the Apple logo is on the screen release the on/off button but continue to hold the home button until you see the plug into iTunes screen. Connect the iPod to iTunes and you should be good to go.

Problem in getting the function template object from the repository.

Hi all,
I have created a par file. I have a JCO connection in that. I am facing problems in getting the function template object from the repository. This thing is running successfully when i try to deploy it in Tomcat. But i am facing problems when i try to deploy it in SAP EP 6.0.
Below is statement which is giving error after being deployed to SAP EP6.
This is executing fine when executed in Tomcat Server.
// getting the object of function template
IFunctionTemplate functionTemplate =
aRepository.getFunctionTemplate("YADDNEWUSER");
Note : YADDNEWUSER is the name of the RFC which I am calling from my JAVA Code.
Thanks in advance,
Divija

This sounds like a bug in the smart upload code. I have used this stuff before, but it's probably an older version, so maybe they broke something. Enumerations aren't usually guaranteed to keep things in any particular order. I would say for now, make a method to take the enumeration and a param name to find the value. And write to the JSPSmart people.

Elvis: Is It possible to use the Function Generator and the Oscilloscope simultaneously?

Hi,
We are using the NI Elvis to output a function or a sine wave at a certain frequency and using the oscilloscope on the same board/elvis to read a modified signal. Is this possible? Can we use both the Function Generator and the oscilloscope at the same time? Please help. The oscilloscope would be reading signal from an accelerometer. Thank you in advance. We have no VI as we do not know which to use and if they are possible.

Hi,
There is no problem using the Function Generator and Oscilloscope
at the same time with NI ELVIS. Using the NI ELVIS soft front panels (Start
>> Programs >> National Instruments >> NI ELVIS 3.0 >>
NI ELVIS – see picture attached –‘NI ELVIS soft front panels.JPG’), you can choose
to open more than one instrument at a time. We do this by opening one
instrument, allowing it to begin, and then opening another. We can also program
in LabVIEW using more than one instrument at a time by placing down multiple
Express VI’s taken from the NI ELVIS pallet on the block diagram (see picture
attached – ‘ELVIS Express VI's (LabVIEW).JPG’). One note when doing this,
please see KB 41ODPHX1
for an example of how to program in parallel. If you do not wire the ‘stop’
terminal of the express VI’s, you will get the error described.
David L.
Systems Engineering
National Instruments
Attachments:
ELVIS Express VI's (LabVIEW).JPG ‏74 KB
NI ELVIS soft front panels.JPG ‏56 KB

Facing problem in using webutil functions

hi,
i have developer suite 10g(9.0.4),
i download web util 1.0.6, update all the required changes,
i also download the template, which shows the
but still i am facing problem in using any function,
when i am using get_system_property method then it return exception (06502) value or string error, and all the other functions return no_data_found exception
please help me!!!
with regards,
sidharth

Sidharth,
unfortunately your question doesn't provide enough details to help you out of this. Please provide the code that you use in the function call that causes the exception. If you have error messages to share, the better it is.
Frank

How can and where i use the function "HTMLDB_UTIL.CLEAR_PAGE_CACHE "

how can and where i use the function "HTMLDB_UTIL.CLEAR_PAGE_CACHE " ?
where is the place to put this function?

i have notice that sometime, during visual a report of a table, order by data insert desc, some record are not displayed on some client.
Only whe we clear the cache of internet explorer than this record can view.
I have an idea that a clear page when i call the report may be solve the problem.
Thank's.
------------------------

I can't use the function of "print to video".

I've recently purchased FCPX and Blackmagic Design Decklink HD Extreme 3(version 7.5.2) but I already know this combination looks quite weird because I'm using only DSR. This is the first time I have installed FCP.
I installed FCPX and figured out there's no way to get the video from Decklink on FCPX so that I deleted FCPX, installed FCP 2009 instead and installed FCPX again on the same disk as Final Cut Pro 7... It's a shame to get rid of it.
At first, I could get a good result when printing to tape. There's no problem. But it's not long before I failed to get what i wanted. VCR detects input signal from FCP 7 through Decklink but the monitor of VCR shows only noise. For now, I can't use the function of "print to video".
Also, I connect the input of Decklink to the output of DSR and the output of Decklink to the input of DSR at the same time and monitor w/ the output of DSR. However, the output on the monitor shows something weird when I capture the video from DSR as if the signal is fed back.
Someone told me that I have to use other version of decklink but i'm not sure it would be better if I just change the version.
What's wrong?
What should I do for fixing these all mess?

I've recently purchased FCPX and Blackmagic Design Decklink HD Extreme 3(version 7.5.2) but I already know this combination looks quite weird because I'm using only DSR. This is the first time I have installed FCP.
I installed FCPX and figured out there's no way to get the video from Decklink on FCPX so that I deleted FCPX, installed FCP 2009 instead and installed FCPX again on the same disk as Final Cut Pro 7... It's a shame to get rid of it.
At first, I could get a good result when printing to tape. There's no problem. But it's not long before I failed to get what i wanted. VCR detects input signal from FCP 7 through Decklink but the monitor of VCR shows only noise. For now, I can't use the function of "print to video".
Also, I connect the input of Decklink to the output of DSR and the output of Decklink to the input of DSR at the same time and monitor w/ the output of DSR. However, the output on the monitor shows something weird when I capture the video from DSR as if the signal is fed back.
Someone told me that I have to use other version of decklink but i'm not sure it would be better if I just change the version.
What's wrong?
What should I do for fixing these all mess?

I want to use the Function Generator VI to send command signals through the NI 7344 motion controller. This will be a closed loop servo valve system. I want to be able to change from say a square wave to a sine wave on the fly. Idea's?

I am going to run tests that require an actuator to move using various types of arbitrary waveforms such as sine or square. The NI 7344 is hooked to the UMI that is going through a driver for a servo valve. The loop is analog and it is closed. I have played with some of the examples but can't get it to work. I have used the function generator VI to generate a signal but I think I am using the wrong input VI to the motion control board. When I use what I have it moves the servo and then stops. It doesn't continually generate the signal.
I would love to use the controls on the function generator vi to control frequency and amplitude ect. Any help or pointer would be helpful. Thank you in advance.

Hello,
I'm not clear on exactly how you want to use the generated data but I'm assuming they will be used as your target points.
There's a built-in example for motion called 'One-Axis Contour Move.vi'. This example demonstrates how to provide your target points as 1-D array. All you need to do is to replace the input array with the output of the function generator. In order to have it run continuously, use a while loop. You can further program your application so that it'll change the waveform on the fly by monitoring the user interface but this might be little little tricky as you will need to reset the move and load the new generated points while keeping track of your current position.
I hope this helps. Let me know if you have further questions regarding this
application.
Best regards,
Yusuf C.
Applications Engineering
National Instruments

I have a problem in using the function 'WS_DELIVERY_UPDATE'

Similar Messages

Maybe you are looking for