I have an Apple TV, a sound system and a video projector. The videoprojector and the sound system are separated by 5 meters and I cannot have a wire. What would be the wireless possibilities?

Should I put the Apple TV next to the video proj and send the sound wirelessly to the sound system but how to do this from an optical output? Or I can put it next to the sound system and send wirelessly the HD video signal but I have not found a solution unde 100+$ and people seem to be complaining. Any ideas? Thanks in advance

Read: http://support.apple.com/kb/TS4436
It is pretty short so here is the entire text:
Symptoms
A purplish or other colored flare, haze, or spot is imaged from out-of-scene bright light sources during still image or video capture.
Resolution
Most small cameras, including those in every generation of iPhone, may exhibit some form of flare at the edge of the frame when capturing an image with out-of-scene light sources. This can happen when a light source is positioned at an angle (usually just outside the field of view) so that it causes a reflection off the surfaces inside the camera module and onto the camera sensor. Moving the camera slightly to change the position at which the bright light is entering the lens, or shielding the lens with your hand, should minimize or eliminate the effect.
Which is exactly what eelw wrote.
No one on Apple Support Communities has authority to speak on behalf of Apple, unless their avatar is accompanied by this Apple image:
... identifying themselves as Apple employees.

Similar Messages

  • Camera card using the Apple connector will load photos but not video? the camera is a panasonic Lumix

    Camera card using the Apple connector will load photos but not video? the camera is a panasonic Lumix

    iPad Supported Video Formats & Movie Formats
    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    Also, the movie files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
     Cheers, Tom

  • HT4623 Hi. My device won't update iOS in settings. It won't download apps for me. Itis connected to the internet). The latest app I tried to download appears stuck! Has not completed its  download, won't open and I cannot delete it. What can I do?

    Hi. My device won't update iOS in settings. It won't download any new apps for me. (It is connected to the internet). The latest app I tried to download appears stuck! Has not completed its  download, won't open and I cannot delete it. What can I do? I purchased the product online a year ago. I'm not sure of the exact date... I think it was late November 2012.
    Any help appreciated.
    Fileas

    If this has happened more than once the problem is likely on your PC.
    See here: http://www.apple.com/support/iphone/assistant/itunes/

  • How can I upgrade from Photoshop Elements 12 to Photoshop Elements 13  AND Photoshop Premiere Elements 13? What would be the price?

    How can I upgrade from Photoshop Elements 12 to Photoshop Elements 13  AND Photoshop Premiere Elements 13? What would be the price?

    Hi Raymond,
    I would advise you to buy the bundle package of Premiere and Photoshop Elements 13 which cost 149 $ but due to online promotions the price right now is 119 $.
    Thank you for posting on Adobe Forums.

  • If I take my bank card details off my itunes account and opened a new itunes account what would happen to the old account?

    If I take my bank card details off my itunes account and opened a new itunes account what would happen to the old account?

    you're more likely to get quick and accurate answers to an iTunes question in the iTunes forum, this is the GarageBand forum

  • I have a desktop Mac OS X Leopard. I want to upgrade to Quicken 2007, Install Snow Leopard and download iLife '11. I heard that Quicken and Snow Leopard can clash and have problems.  What would be the best order for installing these products. Thank You.

    I have a desktop MAC OSX Leopard. I want to upgrade to Quicken 2007, install Snow Leopard, download iLife'11.  I heard that Quicken and Snow Leopard can clash..........that is why I am upgrading Quicken. What would be the best order of installing these products.  I have gotten defferent opinions and I want to be sure I install them correctly.
    Thank You.

    First, install OS X, then install your third-party software.
    How to Install OS X Updates Successfully
    A. Repair the Hard Drive and Permissions:
    Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
      1. Open Disk Utility from the Utilities folder.
      2. Select the destination volume from the left side list.
      3. Click on the Restore tab in the DU main window.
      4. Check the box labeled Erase destination.
      5. Select the destination volume from the left side list and drag it to the
          Destination entry field.
      6. Select the source volume from the left side list and drag it to the
          Source entry field.
      7. Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal
    startup drive.
    C. Important: Please read before installing:
      1. If you have a FireWire hard drive connected, disconnect it before installing the
          update unless you will boot from this drive and install the update on it.
          Reconnect it and turn it back on after installation is complete and you've
          restarted.
      2. You may experience unexpected results if you have installed third-party system
           software modifications, or if you have modified the operating system through
           other means. (This does not apply to normal application software installation.)
      3. The installation process should not be interrupted. If a power outage or other
          interruption occurs during  installation, use the standalone installer (see below)
          from Apple Downloads to update.  While the installation  is in progress do not use
          the computer.
    D. To upgrade:
    Purchase the Snow Leopard Retail DVD.
    Boot From The OS X Installer Disc:
          1. Insert OS X Installer Disc into the optical drive.
          2. Restart the computer.
          3. Immediately after the chime press and hold down the "C" key.
          4. Release the key when the spinning gear below the dark gray Apple
              logo appears.
          5. Wait for installer to finish loading.
          6. Follow instructions.
    After installing Snow Leopard you should update it by downloading and installing Mac OS X 10.6.8 Update Combo v1.1.

  • Apple loop index is empty folder!!! Can not find loop in logic browser because they just no longer exist on my hard drive, what would be the new appropriate step to take?

    Apple loop index folder is empty from the hard drive, which may explain why i can not find loop in my logic pro browser, just sort of grey in disaabled format. what would be the next appropriate steps to take??? I do have an external back up disk.

    The IDE interface that the iBook and your desktop use are the same, just a different plug size. So with the rite adapter you could put the iBooks drive in your desktop, you could even boot off it too.
    If you want to install the laptops HD in your desktop this will do it for you. Or you can use the iBooks HD as an external hard drive with this

  • Sending Video over the wireless network

    I am considering capturing images from a IEEE 1394 camera and sending it over the Wireless network to another computer.  The reason we want to do that is to make the
    camera device light and portable by connecting it to a portable tablet computer.
    What kind of protocol is the best way to transfer the image. The TCP or UDP in labview convert data into string before the transmission which are very inefficient. I just want to streaming the raw image data, maybe with some protocol overhead.  Did National Instrument has any package to do that or any other software packages available?
    There might be another solution is to use the Ethernet cameras instead of 1394 cameras.
    Would it be possible for the Labview application on a remote desktop computer to acquire the Ethernet camera over a WiFi wireless connnetction in between ?
    Thanks
    Cindy

    Hello Cindy,
    If you want to transfer data across a
    network, TCP would be the most efficient method (wireless is typically not as
    successful as Ethernet due to the overhead).  There is actually a very useful knowledgebase
    document that discusses the various methods used to transfer image data across
    a network.  If you go to our main site http://www.ni.com and search using the keywords “Images
    Over Network”, the first link is entitled Streaming
    IMAQ Images Over a Network (or Internet) which gives brief descriptions if
    you choose to use TCP/IP, Datasocket, LabVIEW web server, or ActiveX.  Another very informative document results in
    that same search and is titled Transfer Images Over the Network
    which actually gives examples
    illustrating different ways to send images.  I hope this helps.  Please let us know if you would like further
    clarification or assistance regarding this issue.Vu D

  • Apple TV in Living Room and Airplay from Mac Mini .. what about Keyboard and Mouse?

    Now I know that you can air play the mac mini to the apple tv, but before I go out and buy an apple tv I want to know something. My living room is a little away from the room where the mac mini is, how can I have the keyboard / mouse work with the apple tv to wirelessly control it? Do I have to buy an additional keyboard / mouse? Some people have mentioned the remote somehow works, but I need the keyboard and mouse to work, any tips from the pros?

    I'm not a huge fan of Airplay Mirroring - what do you intend to use it for?
    How old is your Mini and is it able to Mirror?
    You need:
    iMac (Mid 2011 or newer)
    Mac mini (Mid 2011 or newer)
    MacBook Air (Mid 2011 or newer)
    MacBook Pro (Early 2011 or newer)
    Mac Pro (Late 2013)
    http://support.apple.com/kb/ht5404
    If you don't meet the specs try AirParrot software.

  • I have WRT54GS, but what would I gain from a Draft n Router?

    I have a WRT54GS router and I am wondering what would a new Draft N router do for me? Is it worth the upgrade?
    Which Draft N model would be an upgrade to the WRT54GS?
    How much faster will it be than my existing GS?
    Also,
    My WRT54GS is very stable, how stable is the new Draft N models?

    great_white wrote:
    you can go for any of n- routers...the range will be 4 times farther and the speed will be 12 times faster than the normal g standard routers...
    I am sure I am not the most knowledgeable person to answer this, and judging from your profile you may be more apt to give a "right" answer than I, but as I stated above if the OP has no current issues with their setup then there would really be no reason to update to an N router.
    Who really needs 12 times more speed and 4 times more range if you are never more than 50-60 feet from your router to begin with, not to mention if you still only have a G card in your laptop or PC then you would not get the "benefits" of the N router anyway, am I wrong in this assumption?
    I'm not trying to step on anyone's toes I just don't like when someone is told to buy something more than what they will need, unless they are buying something that is going to be outdated in 3 months then maybe they should look to future proof a bit more, in which case maybe an N router would be the best choice, but I personally would just like a little more to come out on the N standard as far as being the final version. Also don't these companies putting out the N routers make the claims that their "draft N" hardware may not even be compatible once a final version is brought to market? Meaning you would have to buy a new N router anyway?
    Don't take my post as harsh, it isn't meant that way, just a discussion and some points of interest.

  • I have hp 4050TN laser print. it was worki ng fine 4 days ago and suddenly stoped printing and is  saving all printing orfers. i tried to figure out. i am gettinhg the message that  apple-talk is  turned off and has to be turned on. what is apple talk? i

    my mac is unable to connect to my printer hp4050 laser tn. message i get is apple link is not connected to communicate with the printer. i went to  system preferences but could  not turn on the apple link. i am very new to mac. in pc. i could figure out and fix the problem  but in mac i have no clue at all what to do? it has been almost a week trying without success. help?

    Your operating system, Snow Leopard (OS X 10.6), does not support AppleTalk. Instead, in Snow Leopard the HP 4000 series printers need to be set up to communicate via IP.
    Go to System Preferences and open the Print & Fax item. Is your printer listed in that pane?

  • TS1292 I have money in my account with apple from a gift card and I cannot buy music

    I have $29 plus change in my apple account from a gift card for some time and now I cannot redeem this money to purchase songs

    Two likely causes:
    1.  Have you changed countries somewhere in the process?  The iTunes credit is only valid in the country it was issued.
    2.  Are you purchasing something like a gift for someone else?  You cannot use Store Credit to make certain purchases.
    If it's neither of these, make sure that money is in fact in your account (you would be able to see it in the iTunes Store page of iTunes on your computer if signed in with your Apple ID).

  • "OSX Maveracks cannot be installed on this computer" is the message tht I get when I try to download Maveracks. I have Snow Leopard 10.6.8 installed, 167 gb free space and 3 gb of memory. What would keep it from loading?

    "OSX Mavericks cannot be installed on this computer" is the message that I receive when trying to download Maveracks. I have a late 2007 iMac with Snow Leopard 10.6.8 installed, 167gb free space and 3 gb memory. What are reasons that it won't download?

    Does your computer meet the requirements listed below?
    To install Mavericks, you need one of these Macs:
    iMac (Mid-2007 or later)
    MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
    MacBook Pro (13-inch, Mid-2009 or later),
    MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
    MacBook Air (Late 2008 or later)
    Mac mini (Early 2009 or later)
    Mac Pro (Early 2008 or later)
    Xserve (Early 2009)

  • HT2305 i have an i phone 4 and i cannot download ios 5 what do i do

    everytime i try to update my iphone4 software it gets ALMOST finished and then says network timed out....i dont know what to do ive tried downloading this for a week now

    Do you have the correct system requirements? To update to iOS 5 you will need:
    Apple ID (required for some features)
    Internet access
    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.5.8 or later
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
    iTunes 10.5 or later (free download from www.itunes.com/download)
    This may also help http://support.apple.com/kb/TS1275

  • I changed my Apple ID email address & password and now cannot log out of or into iCloud on my phone

    The email address for my Apple ID became unreliable (bad hosting).  I went into iTunes and then into the Apple site to change it.  The site required me to change my (very old) password.  I did so.  I removed the new address as my recovery email address, because I could not change the main email to the same address as the recovery address.  I re-verified the (new) address.
    So that worked great!  Except that it's completely broken iCloud and the App Store my iPhone.
    The App Store on my iPhone 4S (Model MD276LL/A running iOS 7.1.2) does not recognize my Apple ID as having purchased anything, including the 100+ apps I've gotten and downloaded over time.  It does recognize that apps need updates.
    I'm also now getting notifications for iCloud on that same phone, which asks me to log into the old account.  If I go to the Settings to delete the iCloud account on that device (as the support site tells me), it asks for the password for the old email address (as the support site tells me), but it will not recognize either the old *or* the new password.
    I have updated iCloud on my Mac just fine.  My iPad Mini, which was attached to my employer's iCloud account by mistake, has made the transition smoothly and recognizes my old account's purchases.  My iPhone is stuck, though, and now I can't text (iMessage is confused) or use other iCloud features.
    Message was edited by: emsariel to better clarify devices

    Hello there, emsariel.
    The following Knowledge Base article offers up some great information in regards to the issue you are describing:
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/ts5223
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for

  • Creative Universal Power Adapter: doesn't ship to Canada

    Creative doesn't ship the uni'versal power adapter to Canada (fulfillment by Amazon.com) ? http://us.store.creative.com/Uni'versal-Power-Adapter/M/B000GB4R66.htm Anyone in Canada know how to get this (apart from asking someone in USA to buy it and sh

  • Planning Stucture authorization issue in SCM

    Hello Experts, Need your help. In our SCM7.0 system, we have implemented FM: /SAPAPO/MCP_PERMISSION_CHECK2 for authorization check to Planning Structure Infocube. That is working fine. Now Users are facing authorization issue in Prodcution when they

  • How to make reader.ready() return false

    reader.ready() method returned false for me when reading from when reader is obtained from databse. eg. Clob reader. So that can be acceptable that next call may block thats why ready() returned false. But i want to simulate situation when reader.rea

  • ListOfValues and POST method

    Hello! Question about UIX lovInput/listOfValues. I used lovInput tag and listOfValues for LOV popup window and meet some limitations for the listOfValues. Investigating this behaviour I found that LOV popup window form uses GET method in form submit!

  • Lightroom 5 vs Canon EOS 6D

    What's hapening between Lightroom 5 and Canon EOS 6D? I can't do Thethered capture