I have an ipad also wifi at home. Would is needed to use my wifi connection while not at home?
I have an ipad also wifi at home. Would is needed to use my wifi connection while not at home?
You can't use your wi-fi connection when not at home. Heck, my wi-fi connection bales out halfway down the back garden. Many places offer wifi hot-spots. Go google. The only (relatively) surefire way to be able to get on the internet anywhere is to have a 3G capable iPad and corresonding data plan.
Similar Messages
-
HT1349 I have an iPad 1 what Apple accessory do I need to use a CF card to upload photos
I have an iPad 1which I have had for about 3 years and would like to load via a CF card my photos direct to the iPad . What apple accessory do I need to purchase to make this happen ?
You may be able to get a USB CF card reader and then use the CCK's (linked to above) USB port to conect the reader to transfer the photos.
You should also be able to do this directly form the Camera through the USB port on the CCK.
Note that there's not much power available from the iPad to power the reader or the camera, so you may need a powered USB hub in the middle to get them to work. -
i tried to restore it multiple times some times it mentiones restore complete and asks me to wait until ipad shows up in itunes which never happens.
Hi there bnvipad,
You may find the troubleshooting steps in the article below helpful.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
-Griff W. -
Hello , I have an iPad 2 wifi 3G , living in Iran , and can not make call , what i should do?
If you're trying to FaceTime, you must be connected to a wifi source and the other individual must also have wifi and FaceTime. Like Jonathan said, it can't make calls.
-
i have a ipad 64GB Wifi 3G and i can not get onto the internet, i dont have a data plan yet & i have set up wifi but it wont conect to the internet
From your description above I conclude that the WiFi transmitter and receiver of your iPad appear to be working, but I abviously cannot tell how well they are working.
Have you reset your iPad already?
Press the Home and sleep/wake buttons simultaneously until only the white Apple logo appears on the screen - usually 10 to 15 seconds - ignore anything else.
Genius Bar: http://www.apple.com/retail/geniusbar/ -
On 3G we cannot send Business emails from either our iPhones or Ipad and this also happens with some WiFi connections but not all. Yet we can always send emails from our Hotmail Account using both 3G and WiFi.
We bought the iPhones and Ipad so that we could send emails while we are out of the Office, but we are not able to do this unless we can find a WiFi connection. Incoming emails are fine. We use IMAP, for Business emails just incase this is relevant and I know that Hotmail is POP3.
Our technical IT knowledge is not great, so we look forward to your suggestions as to how to resolve this.Contact whomever supports the email account and get the correct Outgoing email server settings from them.
-
Hi
I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is the Bluetooth connection working to use GPS positioning on the IPad using IPhone 5 as the hotspot?
Thanks for your input
Felix013try a RESET ALL SETTINGS
-
I have an iPad 2 and iPhone 4 and for them I use I cloud I have also 1 pc windows and at work place I use windows pc ; until now my files are stored on an external disk drive could' I use iCloud to perform the backup of my external disk drive ? Thanks
LoredanoThese are the options you have.
Budget $1299.
http://www.apple.com/macbookair/
http://www.apple.com/macbookpro/
Best. -
Hello, I have an iPad Mini WiFi Cellular white 16Gb and I puted my sim inside it but, I cant read the text message that I recieve in the Sim. What can i do? And I can't put the sim in a cellphone coz it doesn't recognize it. Please help me! Thank you.
iPads do not do SMS.
-
I have an iPad 2 (Wifi + 3G). Is it correct to use the Wifi and 3G at the same time, or one at a time, depending on connectivity? Thanks in advance.
Your iPad will use wifi first if available. If wifi is not available, it will use 3G.
Cheers, Tom -
I have the IPAD 2 and my home seems to be frozen. Please advise.
I have the IPAD 2 and my home seems to be frozen. Please advise.
If you are stuck in an app, run the device dead and restart by charging. Next MAKE SURE YOU DON'T MESS UP WHEN OPENING AN APP open settings > General > Accessibility > Assistive Touch > on.
-
I just purchased an Novella MiFi ~ I have an Ipad 2 wifi only. My ipad will recognize the device, but when I try to connect, is says I am not connected. Suggestion?
Getting connected to a mifi the first time was goofy for me as well. The message you are getting means you have not satisfied the security on the my yet.
On mine, when I set it up, I had to declare a password. But it never recognized that password for connecting devices. Turns out the password was only used for changing system settings. When connecting a device what it really wanted was the device code, similar to a router key- not your password. So look through the paperwork and find the key, and try that.
I think you mean novatel, who make a number of mifi units. -
Hello....I have a iPad mini wifi.....and my front glass of iPad mini is broken fron bottom of corner and touchscreen is running properly...if I want to replace this glass then approximately price in India ????
Hi NILANJ PATEL,
Thanks for visiting Apple Support Communities.
Based on the information you have provided, it sounds like your iPad mini needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Best,
Jeremy -
hi everybody,i have a ipad 2 wifi 3G , and i want to share my internet from ipad to an other ipad or pc , when i check setting menu,i cannt see ,"personal hotspot" ,please help me ,for active this option on my ipad
how can i ,install this function on my ipad ?please help me
is there any way for solution my problem?i mean that how can i personal hotspot or an onther application for this purpose
i will have a internet sharing by ipad for my labtop -
IPad mini wifi connection slow
I just got an iPad mini, and i have noticed that the wifi connection is so slow. I have many other devices, and the wifi on them is great. I've updated to ios 6.0.2 but it hasn't helped. Is anyone else experiencing this? Can it be fixed? Thanks
Hello Ph.shwa5i
Check out the articles below to troubleshoot issues with Wi-Fi and also check your router to ensure that it is using the recommended settings for access.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Regards,
-Norm G.
Maybe you are looking for
-
Revenue analysis report: sap report S_ALN_01001159 : missing information
Hello, Athough profit/loss types were linked to all update types, the profit&loss type for accrued interest update type are not reported for an unkown reason. Does anyone have good or bad experience with the standard version of this report? Any clue
-
Internal error in FORM/FUNCTION OUTSPLIT_SCLAE_UPDOWN in position 1 with RC
Hi All, when I try to do MFBF with reporting points I'm getting error "internal error in FORM/FUNCTION OUTSPLIT_SCLAE_UPDOWN in position 1 with RC4" can anybody give me some idea to how to comeout of this error. Thanks and Regards Ramana
-
Editing RED RAW ... final output for color?
I'm editing with RAW RED files straight from camera. Looking good but just want to know what my best possible output file and quality scheme should be. Anyone else here do this workflow? I want to send out REDlog Film Gamma space for my color session
-
How Can i create this especific xml using structNew()?
Hi everyone! I'm starting my first steps using coldfusion technology and i have been facing some problems when i try to create a client that consumes my webservices. What i trying to do is: to create this kind of xml structure: <elem att1="1" att2="2
-
Relase Strategy with linked to Budget
Hi all, i want to check the budget amount before a Release Strategy is triggered. can some body help me in the configurational steps required for doing so. thanks