I have an ipad2 and the touchscreen stopped working.

This ipad is new as of December and suddenly this week we are unable to unlock and it will not read a touch on the screen at all. Rotation works fine. Any ideas or suggestions would be much appreciated! Thank you!

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Similar Messages

I dropped my iPhone in the water and the touchscreen stopped working.

I dropped my iPhone in the water and the touchscreen stopped working. After drying it out for a few days I had the LCD replaced, but the touchscreen is still not working. What do I do?

Why don't you ask that question of the person who performed the uncertified service?

I can't make or take phone calls, but i can message and use data. Has this happened to anyone else? I've gone through three Samsung Galaxy S5's in the past three days, two of which have this problem and one just stopped working all together.

My phone doesn't have any cellular phone functions...but it CAN send text messages and access data. Has this happened to anyone else? I've gone through three Samsung Galaxy S5's in the past three days, the last two have this problem and the first stopped working all together. I've had new sim cards put in, ive done hard resets on the phone, i've rebooted the phone, done battery pulls, and tech support has reset the signal to my phone. Nothing has worked. (I just "upgraded" <- lol.... and my old phone IS turned off.)

Im in 79707. So to recap my whole case: I upgraded my device using the verizon wireless website. I received my phone and switched my old SIM card from my Droid Razr Maxx HD into the new Galaxy S5. Everything worked fine until the next morning (May 31st) when I woke up and the phone wouldn't turn on. I took the phone to the local Verizon store and they were also unable to turn it on. They issued me a new Galaxy S5 (referred to as phone 2) and switched my SIM card into that one.
With PHONE 2 i was able to make calls and receive calls, along with text and data for approximately four hours. After that, i was unable to use the phone function of the device, but text and data were still functioning. I took PHONE 2 back to the Verizon store where they attempted to hard reset the phone twice, they also installed two new SIM cards at the store. After this they would get the same error, which is the phone just reading "Dialing..." after attempting to make a call. The Verizon associate declared the phone "DOA" and issued me another Galaxy S5 (referred to as PHONE 3).
PHONE 3 worked well, with phone text and data featured intact from when I received it on the after noon of the 31st until approximately 2:30PM on June 1st. I contacted Verizon Tech Support via Gmail phone to attempt the correct the problem. They reset the connection, had me do a battery pull, had me close the "phone" application, and erase the data and catche, then restart the phone. All of which had no effect. My phone is still able to receive texts and use data (even with wifi off) it simply cannot make or take phone calls. all it says is "dialing..." when I attempt to make a call. When other phones call my device it rings once on their end and directs them to voicemail, PHONE 3 does not ring on my end.
I have made sure my old phone is completely powered down.

Hello My system version 10.5.8 I have installed Safari update - 5.0.6 and the browser stopped working. At openingit shows the following icon: "Safari has suddenly finished working. Possible problem is in the action of the plugin "TastyAppsAVPlugin".

Hello
My system version 10.5.8
I have installed Safari update - 5.0.6 and the browser stopped working. At openingit shows the following icon:
"Safari has suddenly finished working. Possible problem is in the action of the plugin "TastyAppsAVPlugin".
After deleting all plugins from the folder "Internet Plugin", Safari worked again no problem, BUT all sites with flash content (e.g.YouTube) did not work.
I then tried the following experimental steps:
a) Moved all plugins from the folder "Internet Plugin" into a temporary folder.
b) Downloaded and istalled Adobe Flash Player version 10.3.181.34
c) Started Safari and it did not work ( same message"TastyAppsAVPlugin")
d) Deleted Adobe Flash Player from the folder "Internet Plugin". Safari worked.
e) Moved back all plugins, except Adobe Flash Player, from the temporary folder to "Internet Plugin" folder. Safari works... But Flash won't work!!! Before update to Safari 5.0.6 , ev erything worked perfectly well.
Guys, please solve the problem
Regards
Ruslan Reed
[email protected]

MayaMa --
There are many threads on this. I typed "Uninstalling TastyApps" in the Google search, and came up with these:
http://www.google.com/search?client=safari&rls=en&q=Uninstalling+tastyapps&ie=UT F-8&oe=UTF-8
I do not know which of the many TastyApps haxies you have. Perhaps it would be better to contact them directly, once you know which of their products you have.

I have new ipad2 and the iTunes have only podcasts and iTunes U options. I simply can't download music or vidoes. Please help!

i have new ipad2 and the iTunes have only podcasts and iTunes U options. I simply can't download music or vidoes. Please help!

Not all content types are available in all countries, and unfortunately where you are you will only have apps, podcasts, iTunes U and free books - the full list of what is available where is shown on this page : http://support.apple.com/kb/TS3599 . As the terms of use of the stores state that you can only use your own country's store, you also can't get music or films from Apple from other country's stores.
Are there other music and/or film purchase download sites that you can use in the UAE ? For music you can also copy your own CDs and sync them to the iPad

HT201401 I have I phone 4s and the speaker stop working suddenly, I can hear through the headphone, please advice what is the problem? Thanks

I have I phone 4s and the speaker stop working suddenly, I can hear through the headphone but when I remove the headphone can not hear anything , please advice what is the problem? Thanks

Thanks for your reply, but what shall I do now ? I bought this phone from china's apple store, and I am in Egypt so there is no warranty for this phone in my county, please advice how can I solve this problem? Is there any troubleshooting tips I can follow to solve this problem ?
Thanks

I have an Iphone4s and its fairly brand new still, and all of a sudden i was talking on the phone and the speaker stop working.. Is there a manufacture warranty on the iPhone?

I have an Iphone 4s and its fairly brand new still, and all of a sudden i was talking on the phone and the speaker stop working.. Is there a manufacture warranty on the iPhone?

Verdale wrote:
... Is there a manufacture warranty on the iPhone?
There is a One Year Warranty...
iPhone User Guide
Have you tried any of the Basic Troubleshooting Steps...
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

I updated my ipad and the sound stopped working.

I updated my ipad to IOS 8.1.and the sound stopped working. My sidebar buttons say soundeffects or soundeffects mute when I press them. On my control panel there is no sound bar. As you can see in this screenshot it is not showing a sound bar to adjust volume. HELP?!

Update: Last night, I cleaned my headphone port & docking port. Reset Network Settings & General Reset all settings & reset ipad. Didn't work immediately & had some setbacks. I decided to wait to do the restore factory default for the next day, this morning. I decided to test the sound before proceeding. My sound is working correctly now & didn't need to resort to the restore factory default. All of the above worked but perhaps needed over night to really dry the rubbing alcohol used to clean the ports.?
sound is working. Thanks so much for your help Diavonex!

Mistakenly opened all the folders in my library of music and the Finder stopped working. Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing they reappear

mistakenly opened all the folders in my library of music and the Finder stopped working.
Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear

mistakenly opened all the folders in my library of music and the Finder stopped working.
Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear

I upgraded my iPhone 4 to ios 7.4 and the screen stopped working i can not use the phone How to fix it ?.

I upgraded my iPhone 4 to ios 7.4 and the screen stopped working i can not use the phone How to fix it ?.

Hold the HOME and SLEEP buttons at the same time until an Apple logo appears. If nothing has happened after holding for 30 seconds charge the phone for 15 minutes with the wall adapter and try again.

Migrate to 5.0 to 6i and the exec_sql stop working

Hi,
I4ve migrate my application from Forms 5.0... to 6i(6.0.8.17.1). I have a function that uses EXEC_SQL, and this funcionallity stops working. When I execute the following commands I have an ORA-306500 error.
-- Open the cursor
cursor_count := exec_sql.open_cursor(p_conexao);
-- Command to be executed
exec_sql.parse(p_conexao, cursor_count,'select count(*) from ' || p_dctabela || dcwhere);
-- Defining columns
exec_sql.define_column(p_conexao, cursor_count, 1, lcounttabela);
-- Executing
ignore := exec_sql.execute(p_conexao, cursor_count);
At this point I4ve got the ORA-306500 error.
I4ve installed :
- Oracle Open Client Adapter for ODBC 2.0.2.15.0
-- Oracle Open Client Adapter Deployment Components 2.0.2.15.0
-- Oracle Open Client Adapter Development Components 2.0.2.15.0
-- Oracle Open Client Adapter Language Supplement 2.0.2.15.0
- Oracle Open Client Adapter for ODBC 6.0.5.35.0
-- Oracle Open Client Adapter Deployment Components 6.0.5.35.0
-- Oracle Open Client Adapter Language Supplement 6.0.5.29.0
The ODBC is correctly configured, the source is DBF.
Thanks in advance,
Jorge

I have the same problem!
Let me know if you find any solution.
/Tobias Lindblom
[email protected]

HT4061 im trying to update to ios 7 but the touchscreen stopped working

im trying to update to ios 7 but the touchscreen stopped working

Try this troubleshooting guide:
http://support.apple.com/kb/TS1827

While attempting to run a game in bootcamp on a rMBP, the CPU gets hotter until it throttles and the game stops working. Is this normal? A machine like this shouldn't have this problem. I haven't touched it and fans are maxed with CPU still at 90 degrees.

All right, here's what's going on. I have been trying ot run a very graphics intense game on my Macbook Pro with Retina Display through bootcamp on windows 7. When I start the game up, it runs beautifully.... for about ten minutes. Five minutes in, the fans start to whirl loudly. By ten minutes in, performance begins to degrade noticibly and the game starts to stutter. I live with the stuttering until it becomes completely unreasonable and I shut down the game. When I come back to my computer several hours later, the process repeats.
Here is what I believe is happening. When I start the game, the CPU immediately begins to heat up, as CPUs do. Ten minutes in, the CPU has heated up past the safety limit and begins throttling itself back so as to protect itself. Over the course of the next little while, it continues to throttle itself until it finally doesn't have enough power to properly run the game at any reasonable speed, at which point, I get frustrated and quit. My concern is this. I understand that mobile rigs aren't necessarilly the most game friendly, however, this computer should be more than capable enough to handle some light gaming. (Mind you, I'm only playing ten minutes in when the game starts to lag.) Is this something I need to bring into Apple? Is this normal?
Thanks for your help!
Malaxtom

Did you download and install the Apple drivers onto the Win7 system when setting up BootCamp? Without them, Windows will have no way of getting the fans to do their stuff when things get hot.

Do you have an issue with the touchscreen not working when cold?

I just got an iPhone 5 64GB White and noticed that when I ran with it outside today, in about 50 degree weather, the phone's touchscreen stopped responding. Basically I couldn't swipe to unlock. I also noticed when I put the phone on my kitchen granite countertop which is pretty cool, the phone does not recognize my touch on the screen. Was wondering if anyone else is having this issue.

I noticed a problem with the touchscreen at cooler temperatures as well - even at about 60 degrees, it stopped responding to touch in part or all of the screen. It took a while to figure out, but your post helped me - thank you.
I took the phone in to the Genius bar, was able to reproduce the problem (I'd let the phone sit near my car's air conditioner on the way there - heh), and they replaced it without argument. The new phone does not have the same problem.
This is the first Apple device I've had to replace for a defect, and I'm impressed. I hadn't purchased any of their Apple care or any insurance but it was free and took all of 15 minutes.

Why have my back and forward functions stopped working?

My forward and back arrows have stopped working and I am not able to go back or forward even with a mouse. The mouse is alright with all other browsers.

Using the " Safe Mode " the issue of no back or forward arrows or functions, now is the question of why did they stop? I don't have a clue as to why. The problem started just before going to 8.0.1 and it was fine always up 'till all of a sudden the issue reared its ugly head.

I have an ipad2 and the touchscreen stopped working.

Similar Messages

Maybe you are looking for