I have an ipad2 for two day in the am it would say something about disabled but then would come on in 15 minutes or so. Today it just went dead and will not do anything. Any suggestions?
I have an ipad2 for two day in the am it would say something about disabled but then would come on in 15 minutes or so. Today it just went dead and will not do anything. Any suggestions?
Hard reset by holding down the home button and the sleep/wake lock button (BUtton on the bottom of your display, button you use to turn the screen black) hold them both down for 15 seconds till you see the apple reappear
Similar Messages
-
I WAS INSTALLING THE IOS6 UPDATE ON MY I PHONE 4S AND THE SCREN TURNED BLACK NOW WE CANNOT GET IT TO COME ON OR DO ANYTHING ANY IDEA WHAT I NEED TO DO
you may put your device in dfu mode then connect it to itune ,after that there may be a message come up and say you have to restore your device. Restore your device to 5.1.1 then when you finish update it from itune not from your device directly.
-
My daughter's ipod just went dead and will not come back on
My daughter was listening to her ipod touch (purchased last Fall) when it suddenly went dead. Any attempts to try and charge it or connect it to itunes has been unsuccessful. Any ideas what we could do, other than purchase a new one?
Thanks!Hello Evasic
Try different power sources, like a wall adapter or another computer and make sure that the computer is not asleep. Check out the article below for additional troubleshooting options to get it powered back on.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Regards,
-Norm G. -
My iphone 4S went black and will not do anything. It was in my hand when it happened. It is 14 days hold, and has not had nay other problems. Anyone know whats up?
Is the phone charged? Did you try connecting it to a charger? Try a reset of the phone, hold the sleep/wake and home buttons together until you see the Apple logo and then release, ignoring the slide to power off screen if it appears. This will restart the phone and will not have any affect on your data. See if that takes care of it.
-
my iPhone 4 has just shut down. Rang the phone then vibrated for 2 minutes bank screen, will not turn on, also tried charging and will not charge. Any suggestions? I did download a ringtone app and went on to iTunes to sync!.
Try charging the iPhone via a wall socket for at least 30 minutes then try a reset by pressing and holding the sleep/wake button and the home button for 20 seconds (maybe longer) until the Apple logo appears, ignore the red slider. Then turn back on. You won't lose any data doing the reset.
-
I have Maverick installed and my mail, Safari, Mac App Store, and iMessages apps all say that they quit unexpectedly and will not open. Any suggestions?
Process:
Mail [605]
Path:
/Applications/Mail.app/Contents/MacOS/Mail
Identifier:
com.apple.mail
Version:
7.2 (1874)
Build Info:
Mail-1874000000000000~1
Code Type:
X86-64 (Native)
Parent Process: launchd [164]
Responsible:
Mail [605]
User ID:
501
Date/Time:
2014-05-01 22:11:44.754 -0500
OS Version:
Mac OS X 10.9.2 (13C64)
Report Version: 11
Anonymous UUID: 5D0F67F3-4D58-F054-66B6-24017FD68ADC
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
VM Regions Near 0:I will check. Can the security update be installed if you can no longer open the Mac App Store app?
I was listening to the MacCast podcast and the host had a similar issue and did something similar to the link below. I am concerned that I may mess something up by doing this.
http://macs.about.com/od/usingyourmac/qt/Fix-Spod-How-To-Fix-A-Spinning-Pinwheel -Of-Death.htm -
My iPad just went black and will not start. It has not been dropped, nor has it been wet. I am very careful with it. What do I do now?
Plug it into an electrical outlet let it sit a few minutes. Then try performing a hard reset, by holding the home button and the lock buttons at the same time until an apple logo appears.
-
What does it mean when your screen just goes black and will not turn back on? I can connect it to computer to charge and it recognizes it and charges it but no picture on screen.
Hey Krkirst10,
Thanks for the question. It sounds like you may have a hardware issue with your device, however let's try to isolate as much as possible to determine if that is so. To isolate the issue, follow the regular troubleshooting steps for power issues:
Will not turn on, will not turn on unless connected to power, or unexpected power off
1. Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
2. Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
Learn about LCIs and corrosion.
3. Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
4. After at least 30 minutes, if:
- The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen. Then unplug the phone from power. If it immediately turns off, seek service.
- The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
- Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
5. If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
- If the display turns on, go to step 4.
- If the display remains black, go to next step.
6. Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
7. If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
For additional information, see this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thanks,
Matt M. -
When I tap on my Facebook App on my IPad it tries to open up but then it goes right back to my home page and will not open up. All my other Apps work ok.How can I fix this ?
Try deleting the Facebook App and reinstalling it.
-
I have a week old Verizon iPhone 4S and it went dead and I have tried plugging into the wall outlet and into a MacBook Pro and pushed all the buttons but nothing. Besides taking back to Verizon is there anything I can do?
Thanks. I also found that holding the home button and on/ off button at same time for 15 seconds turned it back on.
-
TS1363 Please help my phone just went black and will not go on.
Help my phone went black and do not whant to switch on i bought this phone 3 weeks back vrom a lady and gave my samsung s4 to my wife se will kill me if i ask her for new phone the pone.
You sure the battery is not out of power?
Try doing a Restart/Reset. In this case, it would be the Reset procedure if it does not turn on normally.
http://support.apple.com/kb/ht1430 -
Some of my songs are grey in my library, and some of them have a dotted circle in front of the names. They will show up in my library but will not sync to my phone. Any suggestions.
Are you sure you aren't looking at the tracks in your iPhone/iPod?
That greyed out and perforated circle thing happens when your iPhone is plugged in, you are looking at the music in it and some songs are physically in your phone (ready to play) and some are in the cloud (you can download to your phone whenever you want).
I hope this helps -
HELP! i'm new to iPhones, and so far have been happy. thanksgiving night the phone was acting up so i made sure all updates and software were current, and restored. woke up yesterday to dead phone. thought the outlet where i'm staying might have been broken, but it's the phone. not communicating with itunes, not charging, totally non-responsive. HELP! is there anything to do besides go to the store? thanks.
I am not disputing your statement is not logical or factual. However production of these devices are at least in my neck of the woods readily available. I just walked in less than a week ago and bought a new Apple 5s and my number was ported into it within twenty minutes. So it depends where you live I guess.
Using an analogy of too new to have refurbished devices I would say depending on production and the rate of failure with customer base thrown in (all providers) there has to be returned and refurbished devices. Be it fair!are on day one or day twenty one. You have piqued my curiosity in that I am going to call verizon first, the do a web search to see if broken iPhone 5 devices are replaced with brand new devices.
Of course since I have the 5s it would be a legitimate inquiry.
Happy Sunday -
My IPad just went black and will not turn on or off. Nothing happens. Help!
How can Iget my IPad to come on? It jus went black. It will not turn on or off.
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Safari quits all the time and will not relaunch! Any suggestions?
I can't Launch safari on my imac! Every time i try I keep getting this error message....
Can anyone help?There is no need to download anything to solve this problem.
If Safari crashes on launch and you don't have another web browser, you should be able to launch Safari by starting up in safe mode.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those.
After removing the malware, remember to reset your home page in all the web browsers affected, if it was changed.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.
Maybe you are looking for
-
What is the use of t-code MD74 - Reorganising independant requirements
what is the use of t-code MD74 - Reorganising independant requirements
-
I need collect some system information like free disk size how can i do ?
I wrote a backup applications on client/server style. But i can collect some information about system like free disk size , running application or running services( especially on windows). i know i can do with using system commands like dir, ls etc..
-
Error in Bapi : BAPI_ACC_INVOICE_RECEIPT_POST
Hi Experts, Iam using bapi " BAPI_ACC_INVOICE_RECEIPT_POST " to post outgoing payments ( tcode F-53 ). I have passed all the values to the bapi structures. It is giving the error saying -- " Required field DOC_TYPE was not transferred
-
Can I maintain Elements Tags and Stacking if I backup on Windows and restore on Mac
Can I maintain Elements Tags and Stacking if I backup on Windows and restore on Mac
-
Dear guys i made a procedure for sending mails in loop and when i executed it...its running continuosly,even i closed session,its keep on sending mail as somewhere the loop is wrong. Is there anyway to stop running the execution of the procedure. as