I have an old (late 2008) Mac OX S and I want to hook it to my HDTV, but I get no signal??

I have an old (late 2008) Mac OX S and I want to hook it to my HDTV, but I get no signal??
Please help!!

I know I had an issue trying to connect a VGA cable to my HDTV, if I did not already have the TV input switched to the VGA input BEFORE I plugged it into my Mac. Because the TV had not been taking to the port, it was not sending the right signals to the Mac.
When I would later switch the TV input to the VGA after the Mac was connected, I got messed up video.
I'm just speculating this might be related.
But playing 20 questions (some of which have already been asked by X423423X):
What Mac
What TV
What kind of TV input (HDMI, VGA, DVI, other?)
What kind of adaptor are you using on your Mac
Did you try with the TV input already switched to the correct input source before attaching to your Mac?

Similar Messages

I have a late 2008 Mac Book Pro and would like to upgrade to 8G, any suggestions on a brand? I can only find Ramjet or Cruical for the upgrade and there is a $30 difference in price.

I ahve a late 2008 Mac Book Pro and would like to upgrade the memory to 8g. I can only find 2 options Crucial and Ramjet. There is a $40 difference in the cost. Does anyone know if one is better than the other?

I have gotten my RAM from either Crucial or Macsales. They are both excellent.

I have just bought a new Mac book pro and I want to transfer my iTunes (including music, photos and apps on my iPod touch) from my old windows computer to the Mac... any tips?

I have just bought a new Mac book pro and I want to transfer my iTunes (including music, photos and apps on my iPod touch) from my old windows computer to the Mac... any tips? Is this possible?
(iPod touch 4, Mac Book Pro (osx lion))

In Addition to the post by ds store...
You may find these Links helpful...
Move iTunes Library from PC to MAC
http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html
Download Past Purchases
http://support.apple.com/kb/HT2519
Also see this Excellent Link by Pondini on Transferring Old to New...
http://web.me.com/pondini/AppleTips/Setup.html

I have an old iBook running 10.3.9 and I want to wipe/erase the disk and get rid of it. Problem is Disk Utility doesn't allow me to erase, it has everything grayed out. And I don't have the original startup CD. Any ideas?

Need to wipe 10.3.9 iBook with no OSX cd and disk utility not allowing me to do it.

You need to use an alternate system; this can be a Mac OS X install disk or a system on an external drive. If needed, buy one from a source such as Amazon or eBay, or phone Apple and ask if they have replacement original disks in stock.
(122593)

I have an old version of the iPad 2 and I got locked out is there any way I can get back on it

II'm locked out of my iPad and I need to get on it

If by locked out you mean the passcode, the following has instructions: iOS: Forgot passcode or device disabled

My late 2008 mac book pro runs slow and freezes

Hi, there! I have a late 2008 mac book pro and few months ago I upgraded the operating system from Snow Leopard to Mountain Lion. Since then my mac book often freezes, it is much slower than it was with Snow Leopard and the most annoying thing of all, is the almost inevidable freezing of the toolbar (where language selection, date, clock and other useful tools are located)
I was wondering if someone has experienced similar issues with his Mac Book Pro when upgraded to OSX Mountain Lion and if someone knows if and how this issue can be resolved?
Thank you.

I have the same problem. Up until 2 days ago my MacBook Pro was running fine, then suddenly things started going wrong. I am using mac os x 10.6.7 as well. Does this have something to do with any firmware updates.
Any help/ suggestions welcome.

Hello , how r u, can i ask 1 question about xcode, i have mac os x 10.7.5 , n xcode version 4.6.3 i want build apps for ios 7.1 n mac os 1.9 ,, , but my macbook is old late 2008 macbook 4,1, so can i develop apps for ios7 n 1.9 using xcode 4.6.3, bcz my

hello , how r u,
can i ask 1 question about xcode, i have mac os x 10.7.5 , n xcode version 4.6.3 i want build apps for ios 7.1 n mac os 1.9 ,, , but my macbook is old late 2008 macbook 4,1, so can i develop apps for ios7 n 1.9 using xcode 4.6.3, bcz my machine cant upadte on 1.8 n 10.9,, ihave 2gb ram . core 2 duo pr, plz rely asap,
thnxs

Please type complete sentences and words. This isn't an instant message program.
https://developer.apple.com/support/ios/ios-dev-center.html

HT201343 I have a late 2008 Mac Pro Quad Core 2x2.8 Intel Xeon with Lion 10.7.5- do I need Maverick and will this hardware support the Airplay Mirroring?

I have a late 2008 Mac Pro Quad Core 2x2.8 Intel Xeon with Lion 10.7.5… do I need Maverick and will this hardware support the Airplay Mirroring?

It doesn't mention anything about a Mac Pro. So no.
http://support.apple.com/kb/HT5404
If your computer did support it, you would still need 10.8 or 10.9 for Airplay to work.

I have a MacBook Late 2008 Aluminium and want to increase my storage what should I buy a new HDD or an SSD? I want it to work faster too, can you please recommend specific products that I can consider

I have a MacBook Late 2008 Aluminium which has 160GB currently. I want more storage and to speed up my computer. What should I get HDD or a SSD?
Also can people recommend specific products that are compatible, what are my options?

If you have a cable that connects and external HDD to the MBP, it will do. If it is something like this, an enclosure will not be needed for the swap:
An enclosure allows you to use your old HDD for storage or backup purposes. The cable will not.
Here are instructions as to how the swap can be performed using DISK UTITY. Substitute You cable for the enclosure in same:
INSTALLING A NEW HDD IN A MBP
1. Make certain that you have backed up all of your important data.
2. You will need a HDD enclosure. One with a USB connection will do. A 9 pin Firewire is better.
3. Install your new drive in the enclosure and connect it to your MBP.
4. Open DISK UTILITY>ERASE. From the left hand column drag the new drive into the 'Name' field. Make sure that the format is 'Mac OS Extended (Journaled)'. Click on the 'Erase' button.
5. Click on the 'Restore' button (on top). Drag the old drive into the 'Source' field and the new drive into the 'Destination' field. Click on the 'Restore' button on the bottom right hand corner.
Depending upon the amount of data you are transferring, this may take a couple hours or more. A Firewire will speed up the transfer. This will result in both drives having identical information on them.
6. After the data transfer has completed, you may swap the drives. Start the MBP and you have finished the installation. The initial boot may take a bit longer than you are accustomed to, but that is normal.
7. When you are satisfied that the new hard drive if functioning properly, you can erase the old drive and use it for any needs that you may have.
If there is any confusion on your part, post back.
Ciao.

Late 2008 Mac Pro won't start -- help! Hangs up on Airport: RSN handshake complete on en2.

Hello Mac Pro user,
I have a late 2008 Mac Pro. It will not start anymore. The computer chimes and then goes to the Apple icon screen with spinning cursor, but then it freezes and goes no further.
So I did a single user start up [shift command S],then I let the info. load on the black screen, and found that the system hangs up at this line: Airport: RSN handshake complete on en2. Does anyone know what to do?
How do I get it to boot up again?
Thanks,
Yvette

pull the drives you have. ]
F'ind a way to do a clean system install on another drive.
Clone your user data to another drive also.
ie, create a new solid foundation.
but until your repair your drives, by booting off another device, don't use them. Pull them for now.

I have an older mac and it wants me to update to itunes 10 but my mac is too old and I cant figure out how to disable the update

I have an older mac and it wants me to update to itunes 10 but my mac is too old and I cant figure out how to disable the update so I can use the store.

If Software Update is offering the update then it would be compatible with your model. Unfortunately, you haven't provided us with any information on your hardware that would enable us to determine if it really is too old.
If you really wish to disable the update alert then the next time Software Update opens, select the update in the list then select "Ignore update" from SU's Update menu.

My Late 2008 Mac Pro won't update to Yosemite, even though it has the Mac OS X 10.6.8.

I'm trying to update my Late 2008 Mac Pro to Yosemite. I've checked for updates, and it says I don't need any. I'm running OS X 10.6.8. Any suggestions?

Use this display to get a summary of your Hardware, but do not post your serial number here.
 menu > About This Mac > ( More Info ) > Report > Hardware

I just installed 16gb in my 21" iMac late 2009 and I have macbook 13" late 2008. Can I put the 2gb 2rx8-8500s-07-10-f2 ram in the laptop. Does anyone know the difference of 2gb 2rx8-8500s-07-10-f2 and 2gb 2rx8-8500s-07-10-f1 . thank you!

I just installed 16gb in my 21" iMac late 2009 and I have macbook 13" late 2008. Can I put the 2gb 2rx8-8500s-07-10-f2 ram in the laptop. Does anyone know the difference of 2gb 2rx8-8500s-07-10-f2 and 2gb 2rx8-8500s-07-10-f1 . thank you!

I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards

Hello, I have macbook pro 2008 10.5.8 and I want to upgrade to new soft, which one is the proper one for me Snow leopard or mountain Lion

Hello, I have macbook pro, late 2008, OS X 10.5.8 and I want to upgrade to new soft, which one is the proper one for me Snow leopard or Mountain Lion, and what is the differences between those.
What do you recommend at this time for me.
Thanks a lot

You can upgrade to Mountain Lion, but you have to upgrade to Snow Leopard first. Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Then, make a backup, insert the DVD and upgrade. After upgrading, open Apple menu > Software Update and install the most recent version. Mac OS X 10.6.8 includes the App Store, so open it and purchase Mountain Lion. See if your programmes are compatible > http://www.roaringapps.com

I redeemed Night at the museum 2 digital copy on my old computer I moved over to mac last year and I wanted the digital copy on mac but it says it's already been redeemed which it has on my old computer, so how would i get the digital copy on my mac?

I redeemed Night at the museum 2 digital copy on my old computer I moved over to mac last year and I wanted the digital copy on mac but it says it's already been redeemed which it has on my old computer, so how would i get the digital copy on my mac?

I doubt the license is affecting the performance - it might be a case of the software being too old for the machine.
In any case, you can contact Adobe support thru chat and have them reset your activation count to eliminatre your doubts regarding the license.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

I have an old (late 2008) Mac OX S and I want to hook it to my HDTV, but I get no signal??

Similar Messages

Maybe you are looking for