I have an unlocked 3GS and it is NOT jailbroken. It ran out of battery last night and when i charged it this morning it has got stuck on the apple logo wont do anything else. My computer doesnt pick it up either! Can somebody HELP please!!!
I have an unlocked 3GS and it is NOT jailbroken. It ran out of battery last night and when i charged it this morning it has got stuck on the apple logo wont do anything else. My computer doesnt pick it up either! Can somebody HELP please!!!
nb. i havent updated it for a while to its running a 3. something software.
Connect the iPhone to your computer and launch iTunes, then restart the iPhone by holding down the on/off and the home buttons until you see the Apple logo. If that don't fix you problem take a look at this link, http://support.apple.com/kb/HT1414
Similar Messages
-
My iPhone ran out of battery last night, and now it won't turn on.
The top button doesn't work anyway, but I've tried charging to wake it up using several chargers and via a laptop and plug socket.
The phone's about a year old, and has otherwise been working fine. I've no idea why it would just stop working - no water spilt on it or anything like that.
Can anyone suggest anything?Clean iPhone charging port with toothbrush and small amount of Isopropyl Alcohol. See if better. Try another good USB cable. This iPhone potentially has many problems. Without the top button function it is very difficult to deal with any of the other problems. The iPhone may also have faulty battery, faulty charging port, or worse faulty screen, or even worse faulty logic board. Apple will handle this with perfect Replacement iPhone 4 exactly like yours for $149.
-
Last night, I was watching something on my Macbook Pro and it died (out of battery). I went to plug it in and waited a couple of minutes to try and start it back up. However, when I connected the power source the light was green, which could not have been the case since I know 100% it was out of battery. I proceeded to hold the start button for a long period of time, but my computer made no noise and refused to turn on - it looked like for all intensive purposes it was dead. I left it alone overnight praying that it would be alright in the morning and luckily, when I opened the computer this morning it was restarted and fine. I'm concerned because I've had this happen to me a couple of times and while it always turns back on, I feel like there is a bigger issue that I need to get addressed. Can anyone help me with this? Any ideas? Thank you!
Apple Does Not recommend that. Please Read.
http://support.apple.com/kb/HT1490
From that article
"Portables with built-in batteries"
Current Apple portable computer batteries are pre-calibrated and do not require the calibration procedure outlined in this article. These computers use batteries that should be replaced only by an Apple Authorized Service Provider.
MacBook
MacBook (13-inch, Late 2009) and later
MacBook Air
MacBook Air (all models)
MacBook Pro
MacBook Pro with Retina display (all models)
MacBook Pro (13-inch, Mid 2009) and later
MacBook Pro (15-inch, Mid 2009) and later
MacBook Pro (17-inch, Early 2009) and later
Thanks.
Allan Mac wrote:
Apple recommend calibrating the battery when you buy a new Macbook and then every few months, or monthly if it used on mains all the time. This, as Apple says is to keep the battery operating at maximum efficiency. When the battery discharges and shuts the macbook down, it still has reserve power for a good number of hours. There is also a logic board battery to hold various settings.
I rather think I will take Apples advice on using their equipment not yours, but I would be intrigued to discover what is it you know that Apple doesnt about its batteries?
Allan -
During the last week my Iphone has been switching off/on on its own and now my Iphone got stuck at the apple logo.What should I do?A month ago it also happened but then everything got back to normal.A person told me to change th display...what should i do?please help!
Hey adinat,
Welcome to Apple Support Communities! I would go through the steps in the iPhone troubleshooting assistant and see if that resolves the issue you're experiencing on your iPhone 5:
Frozen or unresponsive iPhone
http://www.apple.com/support/iphone/assistant/phone/
Regards,
David -
My iphone 3g got stuck with the apple logo and loading bar since last night when i try to reset the iphone pls help thanks!
Can you reset the phone by holding the on/off switch and home button down until your phone reboots and the Apple logo again displays?
-
My iPhone has been "frozen" for two hours now on the Apple logo, after me seeing a notification pop up and tell me I have to restore my device. And my device has been stuck since I started and does not seem to be making any progress besides vibratingf every three or so minutes. Why is this?
I'm having this EXACT same problem with my iPhone 4, and I have the same computer stats (I have a Samsung Series 7)
-
and the home button doesn't work so i cant try the home button and power button method. Should i get my home button fixed and try it or is it something else?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I just want to be able to use my phone, l thought maybe the battery was too low for it to finish loading so l plugged it in over night and it hasn't moved at all. What should l do?
Take it to an Apple store to be evaluated; without a working power button, there is no further troubleshooting you can do.
~Lyssa -
My Iphone 3g got stuck in the apple logo and itunes logo after turning it off
I Need Help Now !! My Iphone Wont Turn On I Have tried to jailbreak but still dont work
Discussion of jailbroken devices is not permitted here.
-
My ipad wont work. it ran out of batteries and now its stuck on the apple logo
i just got my ipad less than two weeks ago, and i went to sleep with it on 27% charged. when i woke up it was out of batterie so i plugged it in, but it got stuck on the apple logo with the swirly thing and when i plug it in again, it just keeps making the 'bing' sound over and over again. what do i do?
Using the Charger that came with your iPad... Connect it to the Mains for at least 30 - 40 minutes...
Then try a reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
My phone got sck on the apple logo and won restart
i turned off the phone and when i power it up again it got stuck with the apple logo screen and wont do anything, at the momment i dont have my laptop i am on vacation what can i do to make it pas the apple screen, thanks
You can try a reset - hold the HOME and SLEEP buttons at the same time until an Apple logo appears. If that fails you will need a computer: If you can't update or restore your iPhone, iPad, or iPod touch
-
While I was updating to the new software for my iphone 4s, my wifi gave out and the update was unable to completely download. From then on, my iphone has been stuck at the apple logo screen. I have tried restarting it and plugging it in to my mac, but no luck. Any suggestions?
Did you try to connect in recovery mode to restore? iPhone and iPod touch: Unable to restore
Did you check the security software settings, to make sure iTuens can contact Apple during the process of restoring? iTunes for Windows: Troubleshooting security software issues -
I need help!!! I dropped my iphone from the couch to the floor, really not a big fall... it automatically turned off and got stuck with the apple logo, I already did the reseting process on itunes using the DFU mode or however its called... and it erased all my data and now its still stuck!!!
Does anybody know what can I do?? Please help!If the iPhone is recognized by iTunes, restore it. At the end of the restore process, when you're prompted to by iTunes, do not restore from backup. This will eliminate corrupted/damaged files as the issue.
If the issue persists, it looks like you may need to make a second trip to the Apple store.
Good luck -
I just downloaded the ios 5 and my ipod is stuck on the apple logo
help! i tried to update my ipod to the ios 5 and it said it cant be updated and my ipod got stuck on the apple logo and i cant turn it on or off and my computer cant recongize my ipod so i cant restore some please HELP!!! ASAP thx
Did you try to connect in recovery mode?
iOS: Unable to update or restore
iOS: Not responding or does not turn on -
I have reset all my settings and content of my iphone 3GS but for the last 3 hrs I am stuck at the apple logo and after sometimes its getting off and on by itself but what is coming back is the same apple logo and nothing else is happening. pls advice.
Read https://discussions.apple.com/thread/4875757?start=0&tstart
Maybe you are looking for
-
I have had quite a few problems so this is gonna be a long one. Hi everyone. Recently (1½ weeks ago), i bought all the parts i needed for a new computer. Heres the list: MSI K9N-Diamond AMD Athlon64 X2 3800+ EE (Energy Efficient 65Watt) + Zalman CNPS
-
Processing Dynamic Variable in JSTL
I have problem getting the result of a JSTL variable dynamically. Here is the scenario. I have defined messages for some status values as follows in the page. <c:set var="messagestatus1a" value="Less than 30 days with ME" /> <c:set var="messagestatus
-
How to use a C function as a native method
Could anybody tell me how to use a C function as a Java native method. Thanks
-
Splitting Dimensions on Attributes for reporting
Does anyone have experience or a good idea on how to most efficiently allow splitting a dimension on attributes for reporting custom cells. We are working in 11G. First let me explain We have a dimension Brand that has a level based hierarchy. Total
-
HT204655 Photos library eats up huge amount of disk space
After upgrading to 10.10.3, I imported my photos into Photos app. All my photos are stored on a partition (HFS+ filesystem was applied) other than where OS X is installed, the size in total of this folder is about 36 giga. I checked off the option fo