I have calibrated with spyder4elite and now my blacks are tinted red, how do I fix this?

I have been using spyder4elite to calibrate my iMac monitor and until now the black and whites have been fine, but now my blacks are tinted red. Does anyone know what I might have done wrong? I recently purged my cache - could that have changed something? How can I fix it now?
Thanks in advance if anyone can help me.
Jano

Confirm that you have the latest drivers for the Spyder, 4.5.6. The release notes state that earlier releases had a problem with color cast on some systems. Then run the calibration again. If you continue to have problems, you may want to take this issue up with Datacolor technical support; it's possible that your calibrator is defective, or they may have tips.
Regards.

Similar Messages

When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

Glad you found the answer. But something seems wrong. FCP should be able to assign the scratch disk to your startup drive. It's not advisable, but it should be possible. You might want to try and figure out what's going on before what ever's going on cause other problems.

TS3988 Suddenly my email folder is all different. This IMAP stuff has shown up as folders, and my old folders are subfolders. How can I fix this?

Suddenly my email folder is all different. This IMAP stuff has shown up as folders, and my old folders are subfolders. How can I fix this?
Suddenly I don't have my own trash, but an IMAP trash folder. I have this new IMAP icon on the left of my mail folder. What's going on?

Following up: I went with Option 2 above, and it seems to have worked quite well. I didn't even need to quit iTunes. After the files were moved, the exclamation marks remained at first, until I played the file, or restarted iTunes - now all seems well, until the next crash anyway.

I just hear the effects on the track, and the actually vocals are faint. How do I fix this?

I just hear the effects on the track, and the actually vocals are faint. How do I fix this?

3xlouder wrote:
I just hear the effects on the track, and the actually vocals are faint. How do I fix this?
try toggling the Ducking menuItem

Installed FF4 and now my TouchPad no loner works, how do I fix this?

I installed FF 4 on my Lenovo ThinkPad T61 and now my TouchPad & TouchPoint cannot be used to scroll web pages (they do however work on other programs). I installed the latest driver for the TouchPad & TouchPoint but it did not fix the problem. I also restarted FF in safe mode with Add-on disabled and this did not help either. I can scroll using the arrow key or with the curser, but it's VERY annoying not being able to use the TouchPad & TouchPoint. How can I fix this?

Confirm that you have the latest drivers for the Spyder, 4.5.6. The release notes state that earlier releases had a problem with color cast on some systems. Then run the calibration again. If you continue to have problems, you may want to take this issue up with Datacolor technical support; it's possible that your calibrator is defective, or they may have tips.
Regards.

I removed my /Applications/Safari.app/Contents/Resources/.VideoCaptureFactory.* files and now Safari will not open. How do I fix this?

Hi,
In a stupid attempt to "fix" my computer, I removed my /Applications/Safari.app/Contents/Resources/.VideoCaptureFactory.* files (one was a .png and the other was a .xls).
I followed these steps:
Manual Removal Instructions
1. Run the following command in Terminal:
defaults read /Applications/Safari.app/Contents/Info LSEnvironment
2. Take note of the value, DYLD_INSERT_LIBRARIES
3. Proceed to step 8 if you got the following error message:
"The domain/default pair of (/Applications/Safari.app/Contents/Info, LSEnvironment) does not exist"
4. Otherwise, run the following command in Terminal:
grep -a -o '__ldpath__[ -~]*' %path_obtained_in_step2%
5. Take note of the value after "__ldpath__"
6. Run the following commands in Terminal (first make sure there is only one entry, from step 2):
sudo defaults delete /Applications/Safari.app/Contents/Info LSEnvironment
sudo chmod 644 /Applications/Safari.app/Contents/Info.plist
7. Delete the files obtained in steps 2 and 5
8. Run the following command in Terminal:
defaults read ~/.MacOSX/environment DYLD_INSERT_LIBRARIES
9. Take note of the result. Your system is already clean of this variant if you got an error message similar to the following:
"The domain/default pair of (/Users/joe/.MacOSX/environment, DYLD_INSERT_LIBRARIES) does not exist"
Is there a way to update my db to not look for this or did I remove something crucial to the functioning of Safari? I feel like an idiot.
Thanks for any help.
Sincerely,
Sterling MacNay

You installed a variant of what’s commonly called the “Flashback” or “Fakeflash” trojan, although the names are obsolete.
If you’re certain you know when that happened, and you back up with Time Machine or something similar, you can save yourself a lot of time by restoring your whole system from the most recent snapshot taken before it was infected. Then take Steps 7, 8, and 10 below.
How can you tell when the infection took place? All you can be sure of is that you were infected some time before the problems started. You may have visited a blog that prompted you to install some kind of software, or a “certificate.” You entered your administrator password when prompted. If you remember doing that recently, mention it in a reply, but don’t post a link.
If you don’t know when you were infected, there's no easy, reliable way to remove the malware, because it's constantly changing. There are differences of opinion on this site as to the best of course of action, so you should do your own research before deciding how to proceed.
I suggest you take the following steps:
1. Back up all data to at least two different devices, if you haven't already done so.
2. Boot from your recovery partition (if running Mac OS X 10.7 or later) or your installation disc (if running an earlier version of the Mac OS), launch Disk Utility, and erase the startup volume. This action will destroy all data on the volume, so you must be sure of your backups.
3. Install the Mac OS.
4. Reboot and go through the initial setup process to create an account with the same name as your old one. Don’t import anything from your backups at this stage.
5. If running Mac OS X 10.6.x or earlier, run Software Update. You may have to run it more than once to fully update your system.
6. Restore the contents of the top-level subfolders of your home folder except “Library” from the most recent backup. The Library folder may contain components of the malware. It’s best not to restore anything from there. If you must do so, restore only files, not whole folders with all their contents, and only if (a) they’re visible in the Finder, and (b) you know what they are, and (c) they haven’t been altered. Don’t restore anything in the home subfolder Library/LaunchAgents, if it exists, or any hidden files or folders, no matter where they are.
7. If you’re running Mac OS X 10.5.8 or earlier, launch Safari and select Safari ▹ Preferences… ▹ Security from the menu bar. Uncheck the box labeled Enable Java. Because of known bugs, Java in those OS versions is unsafe to use on the Internet. (Note: I’m not referring to JavaScript, which is unrelated to Java, despite the similar names.) If you’re running Mac OS 10.6.8 or later, you should still disable the Java web plugin unless you really need it. Few websites have legitimate Java content nowadays. If you encounter one that does, enable Java temporarily.
8. Change every Internet password you have, starting with banking passwords. Check all financial accounts for unauthorized transactions. Take this step only after you’ve secured your system in the preceding steps, not before.
9. Reinstall your third-party software from fresh downloads or original media, not from backups which may be contaminated.
10. If you use any third-party web browsers, disable Java in their preferences. As with step 7, this step is mandatory if you’re running any version of Mac OS X older than 10.6. Otherwise it’s optional, but recommended.

My Safari did updates and now it will not open. How do I fix this?

My computer did updates about a week ago and ever since then the internet will not open. It says it downloaded safari 5.1.1, when I try to open safari it comes up with a message saying the community toolbar does not support the version I am using.
How do I fix this so that I can have internet?

This may help you What you can do if Safari quits unexpectedly

My imessage was working for a few days and now it wont work please help how can i fix this

my i message worked the first few days after i hooked it up and then it wouldnt work for a day at a time but now its not sending or receving at all and its been about a week how can i fix this??

Make an appointment at the nearest Apple store and see what they can do for you. Some Apple Stores can replace the screens onsite so that may be an option.
The damage will not be covered by warranty so you will have to pay to have the phone serviced or replaced entirely.
~Lyssa

In Mavericks iPhoto slide shows, why do the last pics come first, some pics are upside down, and some vertical pics are horizontal? How can I fix this?

On my iMac OSX, 10.9.4, Mavericks, I have been trying to view an album as a slide show. The slide show starts at the end (bottom row picture) instead of the beginning (top 1st picture). I have gone to View>Sort Photos>Manual. But the order of Ascending and Descending choices are greyed out with the default check by Ascending. How can I start at my beginning without rearranging all the photos? Also, some of the photos are upside down and sideways, even though they are correct in the album. How can I fix this?? Thank you! Also, can I include a video in the slide show? Up to how many seconds/minutes?

Is this a slideshow created directly from an album?
There's a bug with iPhoto 9.5 and Mavericks in that slideshows from Albums do not play correctly if they are sorted manually. Only photos that have been sorted by date, keyword, rating or title will play from albums correctly.
To have a slideshow with photos sorted manually use the slideshow mode in iPhoto.
Send a bug report to Apple via http://www.apple.com/feedback/iphoto.html.

Just did a sync and update after about a year and a half...all my contacts from the last 2 yrs are gone as well as texts. and an old email account and all the contacts are showing up. how can i fix this?

Just did a sync on my phone after 2yrs. all my contacts are gone and so are the texts. also old contacts from a former email address are in there now. how can i fix this?

you can't fix this bcz after 2 year u sync your mob now everything gone before and after the sync

I have photos with the same numer but they are different photos how can I fix that?

I have photos with same names but they are different photos. Can I rename these photos ? How can I do this?

you can save a file with the same name by dragging and dropping from iphoto to a Finder folder
but (and there are always buts) you can only do up to 4 photos at a time
any more and you are not given the option
This is the error message you get:
An item named “IMG_8770.JPG” already exists in this location. Do you want to replace it with the one you’re moving?
4 or lesss your options are:
Keep Both Stop Replace
5 or more your options change
Skip Stop Replace
it will add a space and a 2 to the name
IMG_8816.JPG turns to IMG_8816 2.JPG
this is the solution I was looking for; let the computer do the name change
Cheers!

HT3529 I have my imessage turned on and i have full WiFi signal and it still wont send as imessage. how do i fix this?

i have my imessage turned on and have full WiFi signal and my imessage still wont work. how do i fiz this problem?

Start here:
http://support.apple.com/kb/ts2755

I have a pavilion dv4 and my internal microphone is not working. how do i fix this. thanks

I have a pavilion dv4 and the internal microphone is not working. I believe I had it working for 1 time but can;t figure it out. please help. thanks

Hi,
Please check it using these steps:
1. Right click the iocon speaker (bootom right hand side)
2. Select "Recording Devices"
3. Enable the microphone
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I UPDATED TO FIREFOX 4 AND NOW MY COMPUTER IS RUNNING SLOWER, HOW DO I FIX THIS PROBLEM

I play facebook games and it either freezes or Adobe crashes. I have updated my Adobe but is still happening

You can find all languages here:
*http://www.mozilla.com/en-US/firefox/all.html

I just downloaded OS X Mavericks and now I'm missing emails. How can I fix this?

When I downloaded OS X Mavericks and re-opened mail I found that I had a gap of 3 months in my Gmail account on Apple Mail. Thousands of emails are now missing, but show up if I go to Gmail on the Internet. I don't know why this has happened and how to fix it. Any help would be great.

Try rebuilding the Gmail mailbox ..
Open Mail then select your Gmail mailbox on the left.
From the Mail menu bar click Mailbox > Rebuild

I have calibrated with spyder4elite and now my blacks are tinted red, how do I fix this?

Similar Messages

Maybe you are looking for