I have created a Blog in iWeb and uploaded it to an FTP server.   It works fine, except that the 'Comments' facility is missing.   When I upload the blog to MobileMe   the 'Comments' facility is there and working great.   How can I solve the problem on th

I have created a Blog in iWeb and uploaded it to an FTP server.   It works fine, except that the 'Comments' facility is missing.   When I upload the blog to MobileMe   the 'Comments' facility is there and working great.   How can I solve the problem on the FTP server Blog.

You haven't a problem. You simply did not read the iWeb Help :

Similar Messages

  • I have a for loop inside of while loop.when i press stop for while loop, i also would like to stop for loop.how can i solve this problem?thanks

    i have a for loop inside of while loop.when i press stop for while loop, i also would like to stop for loop.how can i solve this problem?thanks

    Hi fais,
    Following through with what JB suggested. The steps involved in replacing the inner for loop with a while loop are outlined below.
    You can replace the inner for loop with a while by doing the following.
    1) Right-click of the for loop and select "Repalce" then navigate to the "while loop".
    2) Make sure the tunnels you where indexing on with the for loop are still indexing.
    3) Drop an "array size" node on your diagram. Wire the array that determines the number of iterations your for loop executes into this "array size".
    4) Wire the output of the array size into the new while loop.
    5) Set the condition terminal to "stop if true".
    6)Drop an "OR" gate inside the while loop and wire its output to the while loops condition terminal.
    7) C
    reate a local of the boolean "stop" button, and wire it into one of the inputs of your OR gate. This will allow you to stop the inner loop.
    8) Drop a "less than" node inside the inner while loop.
    9) Wire your iteration count into the bottom input of the "less than".
    10) Wire the count (see step 4 above) into the top input of the less than. This will stop the inner loop when ever the inner loop has processed the last element of your array.
    Provided I have not mixed up my tops and bottoms this should accomplish the replacement.
    I will let others explain how to takle this task using the "case solution".
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • I have a new Apple TV which is working fine except that I cannot access .mov files which are in my iTunes Library. How can I get to these? I can run them on my computer and select Apple TV on the screen, but the Apple TV goes to a black screen

    I have a new Apple TV which is working fine except that I cannot access .mov files which are in my iTunes Library. How can I get to these? I can run them on my computer and select Apple TV on the screen, but the Apple TV goes to a black screen

    Mov is a container format, you'd need to look at the codec used by the movie file inside the container to know whether it will work with the Apple TV or not.

  • TS1453 Hi, I bought Apple tv traying to rent a movie but there problem with itunes, and there is on apple tv don't have my country. could you help me please how can I solve this problem?

    Hi, I bought Apple tv traying to rent a movie but there problem with itunes, and there is on apple tv don't have my country. could you help me please how can I solve this problem?

    Whinston,
    I live in Azerbaijan. Recently I bought apple tv in New York. When I come back to my country tried to rent movies from my country but couldn't find my country name on apple tv menu, so there is a problem I don't know how to fix it. is there have another way to take a rent movies?

  • I have to send large files like 5MB or biger via mobile phone, but in that cases phone is telling mi to plug in power. And when I do that, there is no problem to send the file. For smaller files there is no problem. How can I solve the problem? Because wh

    I have to send large files like 5MB or biger via mobile phone, but in that cases phone is telling mi to plug in power. And when I do that, there is no problem to send the file. For smaller files there is no problem. How can I solve the problem? Because when I'm not at home I can't plug in the power.

    hi,
    I am sending file from server to client i.e client will request for a file and service will send it back....... no socket connection is there...I am using JBOSS and apache axis.
    pls help me out.....
    Rashi

  • I upgraded Safari in my Mac (10.6.8 Leopard) but the new version does not work with my system so that I now have not a working browser. How can I solve the problem and/or install back my previous Safari version?

    I have upgraded Safari in my Mac, but the new Safari does not work with my system. So I find myself without any working browser. How can I solve this problem and/or install my previous Safari version?

    Reinstall Safari 5.1.10 for OS X 10.6.8: http://support.apple.com/kb/dl1569. Might do the trick.
    But, frankly, I don't think that simply reinstalling the old Safari will work because of all the peripheral, under the hood changes that happen when you upgrade from one version of Safari to another. Reinstalling 5.1.10 may be insufficient to turn back the clock. (This is the moment where a Time Machine or another form of full backup would save your bacon.)
    While you're getting a copy of Safari 5.1.10, get a copy of Firefox (https://www.mozilla.org/en-US/firefox/desktop/), too, so that you have an alternate browser to use as you're sorting matters.

  • Aperture (3.4.1) no longer opens and the following message appears: There was an error opening the database for the library "/ Users / Andrea / Pictures / Aperture 3 Library.aplibrary." How can I solve this problem? Thanks

    I was using Aperture (3.4.1), when he appeared a notice that asked me to stop the Mac with the power button. When I restart Aperture no longer opens and the following message appears: There was an error opening the database for the library "/ Users / Andrea / Pictures / Aperture 3 Library.aplibrary."
    How can I solve this problem?
    Thanks

    After a system crash your Aperture Library may be corrupted, because Aperture may not have been able to finish the ongoing database transactions.
    Have you tried the Aperture Library First Aid Tools?
    Aperture 3 User Manual: Repairing and Rebuilding Your Aperture Library
    Try "Repair Database", and if this does not help: "Rebuild Database"
    Regards
    Léonie

  • HT2542 Hi, I created a new user on mac, Admin but i can't use adobe CS6 while the original user is admin too and all programs are running normal. How can i solve this problem?

    Hi, I created a new user on mac, Admin but I can't use adobe CS6 while the original user is admin too and all programs are running normal. How can I solve this problem?

    Hi Amanda,
    Software applications are usually installed in the Applications folder on the Macintosh HD and are accessible to all users.
    I would advise you to check the Applications folder and see if your software is in there.
    Next step would be to Control Click or Right Click on the application and choose "Get Info" and make sure the permissions are set to "Read & Write" for all users. The article below provides more details:
    Troubleshooting permissions issues in Mac OS X
    http://support.apple.com/kb/ht2963
    You may need to contact Adobe Support if this does not resolve your issue:
    http://helpx.adobe.com/photoshop.html
    Hope this information helps!
    - Judy

  • I had a case that I drop little juice  over my macbook air, I dried it immediately and it keep  working fine, as this happen while I am traveling I kept working on it for around two week, it was working fine except that the few key became sticky.

    I had a case that I drop little juice  over my macbook air, I dried it immediately and it keep  working fine, as this happen while I am traveling I kept working on it for around two week, it was working fine except that the few key became sticky.
    When I back to Jordan I sent it to the authorized support center “ Multivision” in Amman and asked them to help in cleaning the keyboard as it still sticky and I explained to them that the issue and I clarified that all are working fine.
    For a two days they didn’t back to me and they answered that they are still checking it, and then after they just called me saying that my macbook is damaged and not working and its better for me to buy a new one!!!
    They say that the liquid damaged the main board! I explained to them that this can’t be as it was working fine when I delivered it to them and I didn’t ask them to open it I told them to help in cleaning the keyboard!
    I am complaining about this support behavior and they were not cooperative nether polite in communicating.
    I am not convinced that the liquid damaged my macbook and I think that the staff at “Multivision” are not qualified and did something wrong to damage my macbook!
    I need you help to investigate this issue and have a feedback.

    Get the new keyboard at eBay and replace by yourself may be cheaper way, though you're required higher skill and well know about MacBook Air.
    http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0 .Xmacbook+air+2011+keyboard&_nkw=macbook+air+2011+keyboard&_sacat=0
    https://www.youtube.com/watch?v=gLbasVD69xo

  • HT1338 There's green mark has been shown on the left side of the screen on and off . How can I solve this problem ? Please.

    There's green mark has been shown on the left side of the screen on and off . How can I solve this problem ? Please.

    iMac (27-inch Mid 2011), Mac OS 8.6 or Earlier
    Not possible.  Which OS is currently installed on your iMac? 
    If your iMac came w/DVDs when you originally purchased it, run the Apple Hardware Test and post back the results. 
    If you are still under warranty and/or have AppleCare, call them.  Let them deal w/it. 

  • ı have ip4s, today i noticed that there is a yellow area left of screen. How can i solve this problem ?

    ı have ip4s, today i noticed that there is a yellow area left of screen. How can i solve this problem ?

    live with it.  Or you can bring it in to a 3rd party repair shop and see what they say.  However, anyone other than Apple touching that phone will void the warranty and any support on that phone forever.

  • I bought an i pad as second owner, the first owner said he just open it but when i returned to my twon, i realized that he make account and download some programes, i lost the opportunity to download free I work programes how can i solve this problem

    i bought an i pad (4) on 2014 as second owner, the first owner said he just open it but when i returned to my town, i realized that he make account and download some programs, i lost the opportunity to download free I work programs how can i solve this problem?

    If you are trying to activate an iPad or iPhone and it is asking for the original owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. No must contact the original owner to get permission to use the device. If you cannot contact the original owner return the device to where you bought it and get a refund. You will never be able to activate the device and no one can help you do it.
    IF the iPad is working ok but is signed in to another users Apple ID use the Settings app to sign out of the old ID and sign in to your Apple ID.
    Settings > itunes and App Store > tap on the applie ID and sign out > sign in with your Apple ID.
    you should then be able to download or purchase apps using your Apple ID.

  • I have an Ipod touch and when I connect it to my computer using a usb cord it isn't recognized, how can i get the songs that I purchased off of this iPod without syncing?

    I have an Ipod touch and when I connect it to my computer using a usb cord it isn't recognized, how can i get the songs that I purchased off of this iPod without syncing?

    For Windows see http://support.apple.com/kb/TS1538
    For Mac OS X see http://support.apple.com/kb/TS1591

  • The problem is when we create and then publish to ibooks review it can not be shown completely. How can I solve this problem?

    The problem is when we create and then publish to ibooks review it can not be shown completely. How can I solve this problem?

    If you are saying, that you published the book to  the iBooks review team and cannot be seem in the store.
    Use your iTunes Connect account > Manage your Books to check on its status. It takes time so you need to allow a few days.
    If its a problems viewing on your iPad Follow  the above advice and another option is is export your  book, open iBooks on your  Mac and drag the  book into  iBooks.
    You can iTunes > add to libray and sync to your iPad.

  • When you create a link to a web page in numbers and we export the PDF file, the link is offset by 3 rows. Example: if I put a link on the text in cell A1, I found the link A4. In fact, this feature becomes unusable. How can we solve this problem? Thank yo

    When you create a link to a web page in numbers "Mavericks" and we export the PDF file, the link is offset by 3 rows. Example: if I put a link on the text (with Cmd-K) in cell A1, I found the link A4. In fact, this feature becomes unusable. How can we solve this problem?
    Thank you.

    Hi again Raja!
    I did as you recommended and installed HTTPWatch and below is the outcome of that program. It is the exact string with the only exception of obfuscated servernames and portnumbers. The last part that begins with "sap_ep_baseurl=" makes me suspicious, is that part really correct? It looks like it's lacking things.
    Best regards
    Benny
    http://<server:port>/sap/bc/bsp/sap/Z_PURCHASE_REQ/process.htm?
    sap-syscmd=nocookie&sap-client=200&sap-language=sv&style_sheet=
    http%3A%2F%2F<server>%3A<port>%2Firj%2Fportalapps%2F
    com.sap.portal.design.portaldesigndata%2Fthemes%2Fportal%2Fsap_tradeshow%2F
    controls%2Fcontrols_ie6.css%3F7.0.10.0.0&sap-cssversion=7.0.10.0.0&sap-tray-type
    =null&sap-tray-padding=null&sap-accessibility=&sap-ep-version=7.00.200611091758&
    sap_ep_version=7.00.200611091758&sap_ep_baseurl=http%3A%2F%2F
    <server>%3A<port>%2Firj%2Fportal&matnr=9780198603641

Maybe you are looking for