I have created a card. When purchasing I am told that text/photo blocks still need completing; stopping my purchase. These blocks must be on the rear of the Christmas Stitching card template that I cannot see/access on my screen any ideas most welscreen

I have created a card but when trying to purchase am told that text/photo boxes are still to be completed - stopping my purchase. Ivan only presume these boxes are on the rear face of the card which I cannot see. Any comments or suggestions would've greatly appreciated urgently as this is my christmas card!!! Many thanks

Setting Lightroom's preview size to larger than screen resolution is guaranteed to slow things down. I have a dual monitor system whith Lightroom showing the loupe on one screen and the grid on the other. The screen sizes are 1920x1080 and 2560x1440. Following your practice for previews would bring my system to a crawl and I have an entry level workstation.All my previews are of standard 1024x768 in size. The only delays in viewing come when Lightroom is asked to display an image where there is no preview. Once the preview has been created, browsing is near instantaneous.
I beg to differ! The reason is that a preview can be used for any size, which is smaller than that of the preview. Scaling down a preview can be done with little or not loss in quality compared to getting the full resulution and scale that down. Scaling up is not possible.
In your case, you will not use the previews of 1024x768 at all for full screen display. Instead you will force L3 to create bigger previews the first time you open the photo. You could try this by generating the standard previews for new imported photos before you start browsing. Then try to browse. You will probably get the "Loading" message, which indicates that the preview was not used and another one with higher resolution will be made. Then try the same experiment, setting the size of the standard preview to 2048. If, and only if, the size of your display area is not more than 2048 pixels wide and you display a photo in lanscape orientation, you will be able to browse without delay after generating the standard previews.
If I understand your setup correctly, you display the photos in a window of 2560x1440 pixels. I suspect that only 1:1 previews could be used for that. I think Adobe should increase the maximum size of the previews to a value larger than 2048, so that you are not forced to use only the 1:1 previews.
I agree, that when the previews have been generated, browsing is near instantaneous.

Similar Messages

TS1702 When I try to update two certain apps in the App Store, I get a message that says 'cannot connect to iTunes store'. Any idea how to get these apps to update?

When I try to update two certain apps in the App Store, I get a message that says 'cannot connect to iTunes store'. Any idea how to get these apps to update?

Check that the apps are still available in the store

TS2621 I am being told that I cannot receive my hotmail emails. Any suggestions.

I have been using my hotmail account for months but am now being told my password is incorrect. I have tried deleting the account and setting it up again with no luck.
Any suggestions are much appreciated. And thanks.

Can you access your Hotmail via web browser?

A form template .xsn file cannot be accessed. You may not have the required permissions to open the file

Hi there,
When a workflow task is assigned to a user, he cannot open a particular task. and
sees this error in browser:
A form template .xsn file cannot be accessed. You may not have the required permissions to open the file
The ULS Log for Correlation ID has these errors:
The XSN is null and its not a cross server issue. Most likely a permission issue
The XSN is null after attempting to get it from SiteAndWebCache
Please note:
- This user can open all other forms in the same location.
- If I increase his permission to Site Owner, he can open this form - but we cannot allow this.
- He was able to open it earlier - I made minor changes in the form and republished the workflow - since then he is having the trouble.
Any help will be appreciated!
Thanks.

Hi ran009,
Please check if that user has contributor permission on the list that the workflow associated and have Edit item permission on related task list/item.
Also check if the workflow form or other workflow files has been checked out or not. If yes, check it in and test it again. Check Wayne Fan’s post in this thread if you have trouble to check the check-out/in status of the task form.
http://social.technet.microsoft.com/forums/en-US/sharepointcustomizationprevious/thread/cc8dc07b-b73d-424a-a3d4-2a2d7ad84504
Thanks & Regards,
Emir
Emir Liu
TechNet Community Support

I have formatted my computer and re installed itunes. However, I cannot see my purchased musics/movies/books on my library anymore. I can see my purchased registration on my account, but I don't know how can I do to download it back to my pc. Any ideas?

I have formatted my computer and re installed itunes. However, I cannot see my purchased musics/movies/books on my library anymore. I can see my purchased registration on my account, but I don't know how I can do to download it back to my pc. Any ideas?
Thanks a lot

Go to the iTunes Store and select "Purchased" from the Quick Links side bar on the right. Go through all the tabs to download again for free

The item referred to by this shortcut cannot be accessed. You may not have the appropriate permissions

Hi
I originally posted this in the Windows 7 Networking forum and they advised to post it here.
We use Windows 7 SP1 clients with Roaming Profile and Folder Redirection and they are connected to a Windows 2008 SP2 server. We are getting issues when someone tries to open files on their redirected Desktop and they get the message "'The item
referred to by this shortcut cannot be accessed. You may not have the appropriate permissions" if you click browse it then defaults to a different users profile. If you click through the errors the file eventually loads. If you open Word from
the Start menu and then browse to the file it opens fine. We have found that deleteting the Normal.DOTM file sometimes fixes the error, but only seems effective 50% of the time. This doesn't happen for all users, and seems to occur in small
groups and not all the time. We have also had the same message come up with someone trying to open Word files an online learning resource we have created.
There are a couple of events showing for about the time the error occured they are:
Type Error Source Application Error Category Name 100 Event 1000
Faulting application name: WINWORD.EXE, version: 14.0.4762.1000, time stamp: 0x4bae25b7
Faulting module name: wwlib.dll, version: 14.0.4762.1000, time stamp: 0x4bae2623
Exception code: 0xc0000005
Fault offset: 0x00034b81
Faulting process id: 0x1734
Faulting application start time: 0x01d0234ef75c42aa
Faulting application path: C:\Program Files (x86)\Microsoft Office\Office14\WINWORD.EXE
Faulting module path: C:\Program Files (x86)\Microsoft Office\Office14\wwlib.dll
Report Id: 6f74438b-8f42-11e4-9e45-00c2c6506cb5
Type information Source Office Software Protection Platform Service Category Name 0 Event 1003The Software Protection service has completed licensing status check.
Application Id=59a52881-a989-479d-af46-f275c6370663
Licensing Status=
1: 1f76e346-e0be-49bc-9954-70ec53a4fcfe, 1, 1 [(0 [0x00000000, 1, 0], [(?)(?)( 1 0x00000000 30 0 msft:rm/algorithm/hwid/4.0 0x00000000 0)(?)(?)(?)])(1 )(2 )]
2: 9da2a678-fb6b-4e67-ab84-60dd6a9c819a, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
3: dd457678-5c3e-48e4-bc67-a89b7a3e3b44, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
The software protection message we get in clusters of about 6 or more multiple times through the day

Hi
An update. We have approx 400 people with roaming profile/folder redirection on Windows 7/2008 and this only seems to have occurred to about 15 people, and then seems to clear up for a period and then happens again. We also have a similar number
of people with roaming profile/folder redirection on Windows 7/2003 system and we haven't had a report of this issue happening on this setup.
So far we haven't been able to replicate the issue using a test account, so are struggling to find out what is causing it and why it is so random.
Regrds
Dave

HT5621 I have moved permanently from the US to live in the UK. when I try to download a UK app I am often told that I cannot use a UK Apple sstore, only a US store. I need to access various UK stores how can I deal with this?

I have moved permanently from the US to live in the UK. when I try to download a UK app I am often told that I cannot use a UK Apple sstore, only a US store. I need to access various UK stores how can I deal with this?

Try here
http://support.apple.com/kb/HT1311
when you have UK Cards etc best to change as well

I have a license for all adobe files but recently i had a virus and all my files were deleted.Now when i want to have them back with my redemption code it says that i cannot use it anymore.But my license is not expired.How do i get my files back??

i have a license for all adobe files but recently i had a virus and all my files were deleted.Now when i want to have them back with my redemption code it says that i cannot use it anymore.But my license is not expired.How do i get my files back??

Your redemption code was used to acquire an activation code. The activation code is what you need to use when you want to reinstall/enable the software again. Check your Adobe account online to see if the number(s) can be found there.

TS1347 Just downloaded ios7 on my iPad2. Hate that I cannot see the items in my calendar. The letters are way too small and are grey in color. I need the fonts to be dark and very defined...I have health issues-poor vision.

Just downloaded ios7 on my iPad2. Hate that I cannot see the items in my calendar. The letters are way too small and are grey in color. I need the fonts to be dark and very defined...I have health issues-poor vision.

Settings>General>Accessibility>Increase Contrast
Settings>General>Accessibility>Bold Text
are some settings that may help.
There are other settings there ...they may not be to your liking but try them all anyways.
But that's about all you can do for now...except to voice your opinion to Apple here:
http://www.apple.com/feedback/ipad.html

Can photo slideshows created on our iMac be seen on the TV via Apple TV? We cannot see them.

Can photo slideshows created on our iMac be seen on the TV via Apple TV? We cannot see them on the TV.

Welcome to the  Discussion Forums.
Have you tried Repopulating iTunes with the files that you have problems with.

How to create a secure & non editable PDF? So that it cannot be modified by any of the secondary too

How to create a secure & non editable PDF? So that it cannot be modified by any of the secondary tools available online for security breaks and editing of PDF document
I put all the security options but still there are tools to break the security (even password) leading to editing of document
Need to avoid any such situation

If the document is important, and there is something to be gained by modifying it - then someone will just make a new copy of it (e.g. print and scan, screen capture), and make a new document, then change it.
If protecting the integrity of the document - proving it is unchanged - is the thing, look at digital signatures. Forget security, the signed file can be freely edited, but the signature will always show it is changed.

Pdf with filled in field that I cannot see...

I've a pdf file where the highlight fields are filled in, but that I cannot see untill I click on the field.?
Is there an option to see the values in the highlight fields?
Thanks for your help. Kind regards, th

The most likely cause is using the Preview application on a Mac to fill-in and save the PDF form. For more information and a partial fix, see: http://kb2.adobe.com/community/publishing/885/cpsid_88564.html

I have an Apple Air Book and I am very satisfied with it except there are video that I cannot see. The reason is that Quick Time will not support the video. What can I do to be able to get these videos?

I have an Apple Air Book and I am very satisfied with it except there are video that I cannot see. The reason is that Quick Time will not support the video. What can I do to be able to get these videos? I have all ready download Adobe Flash Player and installed it but it has not effect.

Get Flip4Mac (for Windows Media videos):
http://dynamic.telestream.net/downloads/download-flip4macwmv.asp?prodid=flip4mac wmv
And Perian for everything else:
http://perian.org/
You should be able to play most videos with QuickTime player once both are installed.

I uninstalled Firefox and not it will not install for me. I get a error that says, The item referred to by this shortcut cannot be accessed. You may not have the appropriate permissions. What can I do?

I uninstalled Firefox and not it will not install for me. I get a error that says, The item referred to by this shortcut cannot be accessed. You may not have the appropriate permissions. What can I do?

Here is a pic.

Why is it that I cannot see my iMessages from my iPad on my iPhone?

Why is it that I cannot see my iMessages from my iPad on my iPhone? I have both on the iCloud, both have iMessage on, and on my iPhone I show to receive at both my cell phone number and my email address that is linked to my iPad. Any suggestions?

If its SD DV, check the following:
· Camera is set to the proper input
· In FCP, Canvas is set to RGB and sized to "Fit to Window or smaller
· View->External Video is set to "All Frames"
Do a search for Shane's Stock Answers ... I belive #8 covers this question.
-DH

I have created a card. When purchasing I am told that text/photo blocks still need completing; stopping my purchase. These blocks must be on the rear of the Christmas Stitching card template that I cannot see/access on my screen any ideas most welscreen

Similar Messages

Maybe you are looking for