I have created my id for itunes. I am trying to update my phone to the new software, but am having issues. My phone is showing the usb needs connecting to itunes. this has been done, but it is not doing anything. Advice?

help.

Your phone is in Recovery mode. Once you connect to iTunes and the computer, click on restore. See this support document http://support.apple.com/kb/HT1808

Similar Messages

After installing icloud in ipad air model-MD785AE/A serial number-DM*****K10 had upgraded the storage to 20 gb. Payment has been done but the storage still shows 5 gb. Please kindly help.

After installing icloud in ipad air model-MD785AE/A serial number-DM*****K10 had upgraded the storage to 20 gb. Payment has been done but the storage still shows 5 gb. Please kindly help.
<Personal Information Edited by Host>

adetoye50 wrote:
Dear Contacts Journal Support Team,
FYI, this is a user to user support forum. You are NOT addressing Apple here.
Honestly, I doubt anyone is really going to take the time to read the novel you have written.

My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode

My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.

Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors

I just installed the latest version of iTunes to get the updates and new software on my iPod but it hasn't updated my iPod or put any of the new software on there either. How to I get the software to sync onto my iPod?

I just installed the latest version of iTunes to get the updates and new software on my iPod but it hasn't updated my iPod or put any of the new software on there either. How to I get the software to sync onto my iPod?

Are you sure it's not 6.1.6? If it is, that is the latest iOS version that will work on a 4th generation iPod Touch. Later versions require a 5G iPod which has twice as much RAM.

IPhone 3GS stuck and I cannot switch it off. Screen shows an USB plug connecting to iTunes.

My iPhone 3GS stuck and i cannot switch it off. Screen shows an USB plug connecting to iTunes.

this usually appears when your iphone is not registered correctly with apple/itunes so plug it in to your computer and try setting it up if it gives you the correct prompt. if not try to restore and sync. usually tis problem appears when your iphone has no sim card or is not registered correctly. in this case you need to contact your carrier and set up an account. if you are trying to use it without a service or sim card then unless you go through some sketchy program of hacking it it is worthless to you without a sim or service plan. i have the original iphone1 i got from a buddy of mine i used as an ipod before getting an iphone4 and if i took the sim out this message appears. if you do have a sim and a service plan than there might be a problem with the phone reading the sim card you you can go into your service provider's store and request a new sim to see if that works.
I am sorry if none of this is helpful for i have no other suggestions.

How do i download the new software onto my computer so then i can install the new itunes? i dont have the mac app thing either and it wont let me do it from the itunes because my server is not working. how do i fix it?

Hey so i have a version of a mac i think it is kinda old, it is the all white one i got it like 4 years ago maybe. I got a new ipod recently and i cannot downloade any music onto it. this is because i tried to download the new itunes which it said i needed and now when i try to install it. It says i need a new software so i try to download that and is says i need the mac app or something. but it says i need the new software to get that. so i went onto itunes and clicked the apple and pressed new software and it goes onto this little thing that says my internet is alright but my server has not been connecting. My computer is connected to my school and they updated the server thing and now it wont connect, so i can't win. how do i fix this and download everything i neew?

First things first: Pull down the Apple Menu and select "about this Mac" and tell us what version of OS X is currently on your computer.

I just got a new docking system so i plugged it in and put in my ipod, then straight away my screen went white and now its not doing anything! please help!!

! just got a new docking system so i plugged it in to my computer because it wasnt the wall charge type, so I put in my ipod, then straight away my screen went white and now its not doing anything! i press the home and lock button nothing happens... then i plug it in my computer it doesnt come up in itunes or even the copmuter. please help i can not live with out my ipod!

Your post is abit confusing, especially on getting those weird messages and emails,( assumed in your Windows machine.)
Most likely you have Restored the iPod using the new Macbook pro, using the same name as that in your Windows machine, hence the duplicate name warning, as it is trying to sync Automatically.
If you are syncing your iPod to both the Mac and Windows, you must set it to Manually Manage Music, in the first machine that you setup iTunes with the iPod. Read thsi Apple Support Article
In iTunes, Preference, tick on Prevent devices syncing automatically
Hopefully your music are still in both your iTunes library,
Connect the iPod to the Mac
Restore it (just to fix any filesystem corruption by the Windows end)
Set it to Manually Manage Music
Sync your selected songs in your library.
Whern sync complete, Eject it
Connect it to your Windows PC.
Select the song in the library
Sync it.
It should work if your ipod Hardisk is not giving any problem.
Good luck!

I know this has been done to death, but I JUST SWITCHED!!!

I just can't get over how cool Macs really are. I just got this here Mini and even though it has 256 MB Ram and Panther on the hard drive, it is STILL leaps and bounds better than what I had. Lemme fill you in on my history a minute... I bought a PC as a first computer about 8 months ago and it was mistake #1! Winblows EX-PEE worked fine at first, but even though I spent (wasted) over $200 in virus and spyware protection and internal firewall-which was mistake #2, it got slower, and sloowwer, and sllllooooowwwwweeeerrr. And some programs just stopped working. I never used Linux before and knew absolutely nothing about it. So I said "What the hey? For $15 I get a new, more stable OS" So I did it. Mistake#3!!! Install was a little tricky, but not bad. Sure it was virus-free and spyware-free and nearly crash-proof, but that is where the pros END! Cons: Many websites wouldnt load up pictures and this OS was the most un-user friendly I had ever experienced! Installing new software and programs required an iq of 1000 and a couple of IT degrees from MIT!!!
Now before I got this PC from Wally-World (yes you can laugh at me) I had been to Best Buy a couple of times and had my eye on an I Mac. It was out of my price range, but the mini wasn't. And I just couldnt believe HOW SMALL it was! The PC was like $150 cheaper. What a mistake I have learned, but I now know exactly WHY Macs are so much better! So if anyone reading this is considering on getting a Mac, then save up your change and SWITCH!!! I HAVE NOT REGRETTED IT AND NIETHER WILL YOU!
And Tiger did come with my Mini, but I wont install it until I get more RAM, since it it very RAM-hungry.
MAC CONVERT AND USER FOR LIFE!
Carl

Drool on here, welcome to Mac by the way. The water is much better on this side.
Click a pic to feel the awesome 30" • Clone your boot drive, PowerMac G5 performance tips

An update for numbers was shown for my macbook pro, however even though this has been done I cannot open numbers without updating and when you try to update again it advises you that this is already done so we go round in circles getting nowhere, any idea

` I cannot open numbers as it requires and update, and the update has taken place yet it still maintains that an update is required and when you look to iupdate it advises you that you have already updated so we go around the circle and get nowhere. Help please.

Hi renrut,
Do not delete the old version of Numbers (Numbers 2.3, Numbers'09). It has features that the new Numbers has lost (in particular, Print View).
Numbers '09 has been moved to a folder called iWork '09 inside your Applications folder. The icon on your Dock continues to point to Numbers '09. Launching Numbers from that icon is why you get the "Update" message. Numbers 2.3 is trying to open a Numbers 3 document.
The new version of Numbers (Numbers 3.2 is the latest version) lives in your Applications folder (not a sub folder). Drag that icon to your Dock. It will become an Alias. Right click (or control click) on it and Options > Keep In Dock. Now you can chose which version to run.
Numbers 2 on the left (three columns)
Numbers 3 on the right (four columns).
Both versions will run happily side by side. Just be sure which version you use to open a Numbers document. If Numbers 3 tries to "steal" a Numbers 2 document, you will get a warning when you start to edit:
Edit a Copy will preserve your Numbers 2 document and create a Numbers 3 copy. Cancel will get you out. Upgrade will convert your Numbers 2 document to a Numbers 3 document.
If all else fails, you can do Menu > File > Export To > Numbers '09 to revert.
Do not delete Numbers '09 (or Numbers '08) from your machine! You will need them.
Regards,
Ian.
Message was edited by: Yellowbox. Screenshots added again. The forum software was down when I tried to reply. I hope they now show. Ian.

I know this has been said BUT K8N plat won't post

I am at my wits end with this damn thing. I have installed a ton of PCs and never as much trouble as I have with this AMD64 3000. First I ordered it with the Chaintech 150 board after reading great reviews on it. That was my mistake for not looking at the forums to see what the real users say.
OK after RMAing the board back and forth and getting jack I gave up on it, set it aside and got the MSI K8N. Installed it with the things below only and actually got the power to stay on only to lock on keyboard and not post.
I then read everything I could find in forums and tried everything that was suggested on top of what is the usual steps and got squat. I am wondering now if the board is bad and I need to RMA it. Has anyone found a fix to this post problem as I see a lot of people have had it. I can tell you that my board is not shorted out, I tried other ram and am convinced that is not the problem. Went and bought a new USB keyboard I did not need and still crapo. God what I would not do to see a bios screen or even a post!
Any other suggestions? If I RMA this and get the same damn problem I swear I am going to start looking for my chainsaw!
2 months and counting while Doom3 sits unopen!

OK I tried moving the SATA connect to all the other 3 plus I moved the mem. I think now I have tried about every combo with the mem and have had no luck.
One thing that I didn't mention as I thought it was part of how this mobo sets up, but as soon as I plug in the power cable and turn on the PS the PC powers up. I then can control it via the power switch., but if I unplug it then it will repower as soon as the plug is reinserted.
I let iit sit in this error state for quite some time also and it doesnt appear to be a heat issue. There has to be something simple that I either did wrong or am missing. I have read a lot of post of people with this exact same problem and now I am getting emails of more having the problem and asking me to let them know what worked. It would have to have been a really bad Monday at MSI for this many boards to be faulty(and that is humor as I think it has to be something I am missing).
Oh and the Chaintech board would powerup for a split second then shut off. It never made it near a post . Read someplace that Corsair mem would not work with the Chaintech (plus many others) and decided to switch to the mobo choice most forum people were suggesting for a AMD64.
I appreciate all the suggestions.

I realise this has been asked but please h

Hi, I know this is in the FAQ and only a few posts below this thread as well but I still need help. I lost my installation CD for my zen microphoto before I reformatted my computer so when I went to install the necessary materials I couldn't. So... I went to creative and to the following link
http://www.nomadworld.com/language.a...port/downloads
then to the microphoto page. There are no drivers on the page and there also isn't the zen media explorer that I used before to import onto the player. Am I missing something here? What should I do?

Thank you. Your reply was very helpfull and now I can put things on and take off of my player with WMP. I do have one more question though. I have several playlists already on my player (some I made some are the players own like 'most listended to') but they do not appear in WMP nor when I explore the device. When the player is on though they do play. Basically, how can I change/edit/create playlists now?

I know this has been discussed but the login error...

i know i know! many people have posted about this. i have been working with this error for quite a time now and i was happily waiting for apple to solve this. there is still no change and it is getting VERY annoying that apple is not doing something about it!
is there any plan that this error will be removed or will it stay forever?
max

The continuing issue of this login error has been an on-going discussion in "The Lounge". The Hosts are very much aware of it, so all of us need to be patient.

Looks like this has been fixed - but where?

Hi All
I believe i have a customer running into this bug
6578538
com.sun.crypto.provider.SunJCE instance leak using KRB5 and LoginContext
They are using JDK 1.5.0_16 (were on 1.5.0_7 but had to upgrade because of jmap bugs)
I cannot find which version this problem has been fixed in.
Thanks

Usually, you can go to [http://bugs.sun.com] to answer a question such as this,. Enter the bug number and click the query button.
If you click on the main link for 6578538, you will see this in the bug report:
Release Fixed 7(b25), 6u6(b01) (Bug ID:2157866) , 6-open(b08) (Bug ID:2159935)
Nothing about 5.0. That is because it isn't fixed in a generally available 5.0 update release yet.
Click on the next entry returned by the bug search and you will see the sub-report for the 5.0 version of this bug.
This report says:
Release Fixed 5.0u16-rev(b05)
This means that the fix was made after 5.0u16 was released, so the fix will be in 5.0u17 which should be released later this year.
That 5.0u16-rev mentioned above is actually a release that is part of 'Java SE For Business'. This is a program that allows
you to purchase a subscription to get fixes such as this before they are generally available. Please see this for more info:
[http://java.sun.com/javase/support/javaseforbusiness/index.jsp]

I want all my money back, this has been nothing but a BIG pain [].........

I am not happy with Adobes service. I have been charged TWICE and my Creative Cloud is NOT working. Still says I'm on a trail version and yet my trial is up??? And THEN it tells me if have to buy it when my card has been charged two times. I'm so mad and I just want to cancel EVERYTHING with you people and get my money back. I'll just go with another service because you guys suck. I have projects I have to work on and now I have to put everything on hold because it won't work. The website it totally jacked up and doesn't make much sense at all. I would just like all my money credited back to my account or have someone help me fix this because I'm about to go off.

Look thru the following links and use the chat option if required for your situation:
Cancel your membership or subscription | Creative Cloud
https://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
https://forums.adobe.com/thread/1703848
Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

I know this has been answered but... X11 and Gimp

I have read all the advice about reinstalling X11 from the Snow Leopard disk and then doing an Update from Apple.
Recently my hard drive was replaced at the Apple Store and I have had to reinstall all my software but Open Source software like GIMP and INKSCAPE didn't work. SO I religiously read all the docs about this problem and religiously did the stuff above.
Yes I have X11 reinstalled and updated but Gimp and Inkscape STILL do not work - they load but no fonts or anything else does and they just sit there doing nothing no access.
Any ideas - I have taken them off and reinstalled. This has only happened since the new hard drive - everything else is fine but this is very frustrating and I can't work on graphics with these progs now.
Please could some kind person advise another strategy I'm pulling my hair out this end?

I updated this morning and x11 no longer starts. I am now running 10.6.8. The dump from x11 starting
and crashing is below. Looks like a library version problem.
Process:         X11.bin [674]
Path:            /Applications/Utilities/X11.app/Contents/MacOS/X11
Identifier:      org.x.X11
Version:         ??? (???)
Build Info:      X11server-850300~2
Code Type:       X86-64 (Native)
Parent Process: launchd [192]
Date/Time:       2011-10-19 08:30:16.502 -0700
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          566289 sec
Crashes Since Last Report:           6
Per-App Crashes Since Last Report:   6
Anonymous UUID:                      0108C5BC-F883-4756-BD87-EEB33B514D4A
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /usr/X11/lib/libfreetype.6.dylib
Referenced from: /usr/X11/lib/libXfont.1.dylib
Reason: Incompatible library version: libXfont.1.dylib requires version 13.0.0 or later, but libfreetype.6.dylib provides version 10.0.0
Binary Images:
    0x7fff5fc00000 -     0x7fff5fc3bdef dyld 132.1 (???) <B536F2F1-9DF1-3B6C-1C2C-9075EA219A06> /usr/lib/dyld
Model: MacBookPro6,1, BootROM MBP61.0057.B0C, 2 processors, Intel Core i5, 2.53 GHz, 4 GB, SMC 1.57f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545050B9SA02, 465.76 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: USB Storage, 0x05e3 (Genesys Logic, Inc.), 0x0715, 0xfa130000 / 6
USB Device: FreeAgent GoFlex, 0x0bc2 (Seagate LLC), 0x5021, 0xfa140000 / 5
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000 / 7
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Hub, 0x05ac (Apple Inc.), 0x9126, 0xfd130000 / 5
USB Device: i860, 0x04a9 (Canon Inc.), 0x107f, 0xfd132000 / 10
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0xfd133000 / 9
USB Device: Combo Free KVM, 0x10d5 (Uni Class Technology Co., Ltd.), 0x5000, 0xfd133100 / 12
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd133200 / 11
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0xfd133220 / 13
USB Device: Display Audio, 0x05ac (Apple Inc.), 0x1105, 0xfd134000 / 8
USB Device: Apple LED Cinema Display, 0x05ac (Apple Inc.), 0x9226, 0xfd136000 / 7
USB Device: Display iSight, 0x05ac (Apple Inc.), 0x8508, 0xfd135000 / 6
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000 / 3

I have created my id for itunes. I am trying to update my phone to the new software, but am having issues. My phone is showing the usb needs connecting to itunes. this has been done, but it is not doing anything. Advice?

Similar Messages

Maybe you are looking for