I know this has been said BUT K8N plat won't post

I am at my wits end with this damn thing. I have installed a ton of PCs and never as much trouble as I have with this AMD64 3000. First I ordered it with the Chaintech 150 board after reading great reviews on it. That was my mistake for not looking at the forums to see what the real users say.
OK after RMAing the board back and forth and getting jack I gave up on it, set it aside and got the MSI K8N. Installed it with the things below only and actually got the power to stay on only to lock on keyboard and not post.
I then read everything I could find in forums and tried everything that was suggested on top of what is the usual steps and got squat. I am wondering now if the board is bad and I need to RMA it. Has anyone found a fix to this post problem as I see a lot of people have had it. I can tell you that my board is not shorted out, I tried other ram and am convinced that is not the problem. Went and bought a new USB keyboard I did not need and still crapo. God what I would not do to see a bios screen or even a post!
Any other suggestions? If I RMA this and get the same damn problem I swear I am going to start looking for my chainsaw!
2 months and counting while Doom3 sits unopen!

OK I tried moving the SATA connect to all the other 3 plus I moved the mem. I think now I have tried about every combo with the mem and have had no luck.
One thing that I didn't mention as I thought it was part of how this mobo sets up, but as soon as I plug in the power cable and turn on the PS the PC powers up. I then can control it via the power switch., but if I unplug it then it will repower as soon as the plug is reinserted.
I let iit sit in this error state for quite some time also and it doesnt appear to be a heat issue. There has to be something simple that I either did wrong or am missing. I have read a lot of post of people with this exact same problem and now I am getting emails of more having the problem and asking me to let them know what worked. It would have to have been a really bad Monday at MSI for this many boards to be faulty(and that is humor as I think it has to be something I am missing).
Oh and the Chaintech board would powerup for a split second then shut off. It never made it near a post . Read someplace that Corsair mem would not work with the Chaintech (plus many others) and decided to switch to the mobo choice most forum people were suggesting for a AMD64.
I appreciate all the suggestions.

Similar Messages

I know this has been discussed but the login error...

i know i know! many people have posted about this. i have been working with this error for quite a time now and i was happily waiting for apple to solve this. there is still no change and it is getting VERY annoying that apple is not doing something about it!
is there any plan that this error will be removed or will it stay forever?
max

The continuing issue of this login error has been an on-going discussion in "The Lounge". The Hosts are very much aware of it, so all of us need to be patient.

I know this has been answered but... X11 and Gimp

I have read all the advice about reinstalling X11 from the Snow Leopard disk and then doing an Update from Apple.
Recently my hard drive was replaced at the Apple Store and I have had to reinstall all my software but Open Source software like GIMP and INKSCAPE didn't work. SO I religiously read all the docs about this problem and religiously did the stuff above.
Yes I have X11 reinstalled and updated but Gimp and Inkscape STILL do not work - they load but no fonts or anything else does and they just sit there doing nothing no access.
Any ideas - I have taken them off and reinstalled. This has only happened since the new hard drive - everything else is fine but this is very frustrating and I can't work on graphics with these progs now.
Please could some kind person advise another strategy I'm pulling my hair out this end?

I updated this morning and x11 no longer starts. I am now running 10.6.8. The dump from x11 starting
and crashing is below. Looks like a library version problem.
Process:         X11.bin [674]
Path:            /Applications/Utilities/X11.app/Contents/MacOS/X11
Identifier:      org.x.X11
Version:         ??? (???)
Build Info:      X11server-850300~2
Code Type:       X86-64 (Native)
Parent Process: launchd [192]
Date/Time:       2011-10-19 08:30:16.502 -0700
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          566289 sec
Crashes Since Last Report:           6
Per-App Crashes Since Last Report:   6
Anonymous UUID:                      0108C5BC-F883-4756-BD87-EEB33B514D4A
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /usr/X11/lib/libfreetype.6.dylib
Referenced from: /usr/X11/lib/libXfont.1.dylib
Reason: Incompatible library version: libXfont.1.dylib requires version 13.0.0 or later, but libfreetype.6.dylib provides version 10.0.0
Binary Images:
    0x7fff5fc00000 -     0x7fff5fc3bdef dyld 132.1 (???) <B536F2F1-9DF1-3B6C-1C2C-9075EA219A06> /usr/lib/dyld
Model: MacBookPro6,1, BootROM MBP61.0057.B0C, 2 processors, Intel Core i5, 2.53 GHz, 4 GB, SMC 1.57f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545050B9SA02, 465.76 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: USB Storage, 0x05e3 (Genesys Logic, Inc.), 0x0715, 0xfa130000 / 6
USB Device: FreeAgent GoFlex, 0x0bc2 (Seagate LLC), 0x5021, 0xfa140000 / 5
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000 / 7
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Hub, 0x05ac (Apple Inc.), 0x9126, 0xfd130000 / 5
USB Device: i860, 0x04a9 (Canon Inc.), 0x107f, 0xfd132000 / 10
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0xfd133000 / 9
USB Device: Combo Free KVM, 0x10d5 (Uni Class Technology Co., Ltd.), 0x5000, 0xfd133100 / 12
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd133200 / 11
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0xfd133220 / 13
USB Device: Display Audio, 0x05ac (Apple Inc.), 0x1105, 0xfd134000 / 8
USB Device: Apple LED Cinema Display, 0x05ac (Apple Inc.), 0x9226, 0xfd136000 / 7
USB Device: Display iSight, 0x05ac (Apple Inc.), 0x8508, 0xfd135000 / 6
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000 / 3

I know this has been covered but, another sound issue (K8N Diamond Plus)

Ok, I just spent another $111 on a new PSU w/dual 12V blah blah with a 19A rating and I'm still experiencing some pretty weak ass sound. Instead of an eight pin power connecter it gave me a four. Do I need to place the four pins in a diff. placement? i.e. 2,3,6,7 instead of 1,2,5,6? I checked the jumpers and DL all the drivers. Could it be the fact that my processor is 64bit dual core? Do I need diff. power supply or powered speakers? I'm at the end of my rope here. Any thoughts?

PSU: Antec True Power 2.0 550watt or http://www.newegg.com/Product/Product.asp?Item=N82E16817103931
AMD Athlon 64 x2 dual core
WD Hard Drives SATA 80G X 2
old cd and cdr drives not to be mentioned
Corsair 1G
nVidia GeForce 7800GT
thats it so far

Yes I know this has been covered but not answered

Hi I have an IMac that is only a few weeks old with fully updated software on all levels.
Ok so I get that I had to go buy an external CD drive so that I can be old fashioned and still burn music from my CD's into ITunes. I get that I will have to replace my 5.1 surround sound speakers because Jacks and Plugs change over time.
What I cannot fathom is why this silly ISight camera just doesnt work on a chat site I have been a member of for years. Yes its a flash based chat room and no when you right click the ISight camera is not in the list there is only one in the list and it aint the built in one.
Can anyone tell me where I can go to find out how to control this camera - there is no camera or video control under the system preferences - I have ensured that Photobooth and other programs that may use the camera are off or logged out - I have googled extensively - I have even emailed the chat host...
Where can I get access to some camera controls or software that will enable the cam to talk with a broader range of sites??
Max

Ok so use  > System Preferences ... > Flash > Advanced to verify you have the latest Flash software update that is compatible with your system.
Ok so then also check  > System Preferences ... > Flash > Camera and Mic to verify that your Flash settings are not blocking the camera for the site(s) you want.
Ok so if your trouble continues after the above, see How to Troubleshoot iSight.
Ok so at this point, if your ONLY trouble in every user account you tested is with Flash-based camera sites, you need Adobe Flash Player Help.
Message was edited by: EZ Jim
Mac OSX 10.8.4

System Fonts. I know this has been discussed, but...

I need to use Tahoma in muse and I do NOT want it to rasterize for the sake of cleanliness and good SEO. I don't understand why I can't just specify a backup font for people who may not have Tahoma. When I designed in dreamweaver I would just set Tahoma as the primary then Arial or serif as the backup and that worked fine. My company has chosen Tahoma for ALL of our documents, internal and external. Please tell me there's a workaround for this that doesn't involve getting hurt mentally or physically.
Thanks

Hi,
There is no workaround short of manually editing the CSS after Muse exports it. Since you've used Dreamweaver in the past, this may be doable for you (one tip: using paragraph styles will make your job easier). Of course, you'll have to do this every time you change something and re-export.
Background:
The set of web-safe fonts exposed in Muse were carefully chosen based on how universally available they are. Secondly, the set of fonts in a Muse web-safe font stack such as 'Arial, Helvetica Neue, Helvetica, sans-serif' are similar enough that swapping one for the other will not cause much noticeable layout changes. Making it all too easy to create arbitray font stacks is fraught with risk: both in terms of universality and the potential for layout changes.
Abhishek

Video on Mac to Storm...I know this has been covered!

Sorry, I know this has been covered, but it has a ton of things I can not use....or understand.
I am on a mac. I have some movie previews that are in a .mov format. I had uderstood I need to convert them into .mp4 format....I did this in Quicktime....and exprteded them a few different ways....but every time I go to play them they break up and get all pixialated!
I have a 16g card, and I am putting them in the Videos folder on the chip through usb reader.....what am I doing wrong?!
Thanks

It was magical. I did something to my router, I'm not sure what, and iChat now connects to Windows machines with audio/video. I think the problem is very specific to what type of router you have.

So, I know this has been asked before. But, has anyone heard from Apple?

So, I know this has been asked before, but I'm just looking to see if anyone had heard from Apple on this at all. The minimum volume on my iPod Classic 160gb is too high, and I can't lower it. (AKA when I kill the volume, I can still hear music).
I called them today, but the rep was pretty useless. He even dropped the "well, just press pause" line on me. Took him a while to understand that when I'm in bed or studying, etc. the minimum volume is too loud, and I wanted to be able to set it lower.
The best workaround I've found so far is to buy headphones with their own volume control, but I just can't help but feel that someone shouldn't have to by additonal gear after buying this thing on account of such a basic feature exclusion.
Anyways, thanks for any help !

Wow, easy there company boy!
I've heard all of what you spit up before. And for your point of "Well, in several cases, people have complained (here in these discussion pages), that they expect the volume to be zero when turned to minimum position" that kind of ties in to why Apple should fix this.
And yeah....it's pretty much a given that "you and I have different interpretations of what constitues too loud" This is where the option to adjust the minimum volume comes in to play. (I relly feel bad for you. Honestly. Having to live everyday of your life this way must be just brutal)
The wording would be pretty simple too. " Be aware there are many instances of the minimum volume being too loud, so think twice before dropping a few hundred bucks on this"
And, you're right. It is horrible to 'whine' about being ripped off and asking if there is a possible fix for the issue. I really do apologize for that. I should just suck it up and not voice my opinion that this is not fair to consumers, and Apple shouldn't fix a known issue with a product.
I did reset & restore, I figured that was pretty much implied since I said I spoke to Support.
And I am not at all surprised that you would say "I - for one - am not surprised that Apple might say, "simply hit the pause button"." Again, I don't want it on muteReading your post made my eye twitch at least three times.
This is exactly the reason I was resitant to post on a forum. But, I got a good laugh anyways. Thanks guy!

I know this has been asked before But I Deleted 6 mths worth of Bookmark folders, Cant use Undo,

I know this has been asked before But I Deleted 10 mths worth of Bookmark folders, Cant use Undo & havent backed up (live & learn) Someone posted do a restore from "Import & Backup" My listing in Restore is only 2010-6-29 back to 2010-6-22. Is this the way to go to retrieve as much as possible or is there another solution?

Those dates are when a backup was automatically made by Firefox, not dates when you saved specific bookmarks. Try restoring the backup from the day before you deleted all those bookmarks. It will restore the entire backup file - not just what you deleted, you will lose any bookmarks that you saved after the date of the file you restore.
[https://support.mozilla.com/en-US/kb/Lost+Bookmarks]

How can i increase the height of the navigation toolbar to make my persona more visible? adding toolbars puts them all below the navi bar and it looks weird. i know this has been asked many times but the answer's always "add toolbars".

How can i increase the height of the navigation toolbar to make my persona more visible?
adding toolbars puts them all below the navi bar and it looks weird.
i know this has been asked many times but the answer's always "add toolbars".

Look here.
http://support.apple.com/kb/index?page=answerlink&url=http%3A%2F%2Fsupport.apple .com%2Fkb%2FHT1495&answerid=16777216&src=support_site.home.search

I'm burning dvd's that won't play on a regular dvd player. What am I doing wrong? Are there some simple things to check to figure this out? (Sorry, I know this has been asked many times)

I'm burning dvd's that won't play on a regular dvd player. What am I doing wrong? They play fine on computers but not on dvd players. Are there some simple things to check to figure this out? (Sorry, I know this has been asked many times). Created in DVD studio pro.

Hi
Just my thoughts to add to the excellent answers above.
• BRAND of DVD used - Matters when doing Video-DVDs
Memorex, NoName etc cheap brands usually do NOT work
I only Use Verbatim (more organic dye in these)
• Type of DVD - matters
- DVD+/RW - usually results in problems
- DL-DVDs are more problematic than SL-DVDs
- DVD+R are a more modern sort - BUT PLAYS BADLY or not at all on older DVD-players
I only use DVD-R
• BURN SPEED - matters
- Best in iDVD app - IS NOT BEST at all but results in lot's of Burn Errors = Doesn't play well or at all
I set this down to x2 or x4 max.
Yours Bengt W

I know this has been posted a few times but, High Pitch noises!!!!!!!!!

I keep getting wierd high pitch noises from the MOBO, I have tried to push in the MSI plate on the NB but it didn't stop the noise. But what I have found out stops it is kind of wierd.
If I go into any Windows Explorer window and right click on certain icons, (i.e. C: Hard Drive, the nVidia Ethernet Adapter, or my DVD-RW) the noise stops suddenly, but if I click off of the right click menu the noise starts back up again. I don't get it? Also if I use my mouse wheel and scrol up and down rapidly, the sound stops while I am scrolling, but once I stop it comes back.
I know that this has been posted a few times, but I still haven't found any way to stop the noise other than the ways above. So if anyone has/had the same problem and knows how to fix it, I would really appreciate it if you would share.
EDIT: I have also tried to return my CPU to stock speeds but there is still a noise.

Im sure this noise, is the copper coils around the components near the cpu socket.. its a known problem on MSI boards, where they start to resernate / vibrate.
I've seen two solutions, neither have i tried, as I don't have the problem, but they are pretty harmless.
one is to apply a small amount of superglue over the copper coils, allow to set and switch back on,, or a safer way (in my opinion) is to use some wax (or electical sealing wax).
see this post
High Pitch Sound Identified! Read more...

I realise this has been asked but please h

Hi, I know this is in the FAQ and only a few posts below this thread as well but I still need help. I lost my installation CD for my zen microphoto before I reformatted my computer so when I went to install the necessary materials I couldn't. So... I went to creative and to the following link
http://www.nomadworld.com/language.a...port/downloads
then to the microphoto page. There are no drivers on the page and there also isn't the zen media explorer that I used before to import onto the player. Am I missing something here? What should I do?

Thank you. Your reply was very helpfull and now I can put things on and take off of my player with WMP. I do have one more question though. I have several playlists already on my player (some I made some are the players own like 'most listended to') but they do not appear in WMP nor when I explore the device. When the player is on though they do play. Basically, how can I change/edit/create playlists now?

I'd like to go back to a specific date in my messages? I know this has been asked billions of times.

(Specifically April 30 of 2013) but I text a lot so pressing "load earlier messages" isn't an option. Is there anyway I could load the messages on my computer, or is there an app that I could use to search by date? I could get them off my iphone or ipad.

Hi,
The iPhone (iOS Device) and the Mac will only Sync from the day that both start using the same App ID or OS X 10.8.2 whichever is the earlier.
The "Sync" as Apple calls it was different before this time.
The "Sync" is only "Display on all Devices" and does not involve anything else (if you delete a message on one device it remains on the other)
The iMessages are "pushed" at the devices that have the Apple ID or iPhone number and when the iMessages has been sent that is it.
It will not re-sync if you remove the iMessage.
I really don't use iMessages on my iPhone enough to even try "Load earlier Messages".
If you have synced (Backup) the iPhone onto the Mac using iTunes it is apparently possible to extract the messages from the Backup.
However I don't sync this way and don't know the names of the apps involved.
9:06 pm Wednesday; February 19, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Contact Form - I Know this has been asked before. . .

Hello
I know this question has been asked before! But even searching the forums hasn't got me the direct answer i am after.
I need a 'Contact us' form on a website and i have come across posts with people who have got part way with one and needed help - but i need one from scratch. .
I have been told by 11Mystics that 'VaskGirl' can help me with a tutorial she has??
All help will be greatly appreciated. . .
Thanks

I have been told by 11Mystics that 'VaskGirl' can help me with a tutorial she has?? [sic]
"Varkgirl"
http://iweb.aardvarkland.com/
Mark

I know this has been said BUT K8N plat won't post

Similar Messages

Maybe you are looking for