I have downloaded icloud on my pc but it is telling me that my apple id is valid but it is not a valid icloud account I can't work out how to set up an acco
I have downloaded icloud on my pc but it is telling me that my apple id is ok but is not valid as an icloud account, I have tried but can't set up an account any ideas what to do?
Follow the instructions under the heading "How to unlink a phone number" on this page.
Similar Messages
-
Hi - I'm trying to sync iBooks on my Macbook Pro with iBooks running on my iPad. I have some pdf's download from the net I want to share between devices and I can't work out how to sync the two devices. Any help please? I'm running Mavericks
Thanks for your help Brij011 - much appreciated. Apologies as I'm a newbie but I've looked at the info for synching and I appear to have all the switches flicked on my iPad. Does the iPad and iBooks only sync in iCloud for purchases as I appear to be doing something wrong. I could sync ok when books was in iTunes but since migrating to Mavericks I think I'm doing something wrong!!
-
Yesterday, after discovering that the email address I used as my Apple ID was about to be deleted, I used my iPad to update my Apple ID to a new one. Everything went fine, until I moved on to my iPhone, which is still asking me for the password for my OLD Apple ID. I can't work out how to tell either my iPhone or my Macbook that this one is out of date and get them to change to the new one. iTunes is changed, but the settings aren't. Can anyone help me please?
You haven't stuffed it, you just haven't signed out, so do that now, everywhere your old ID appears needs to be signed out of.
Any variant of "Find My" (phone/mac/pad etc) that's signed in should be signed out.
List what needs a sign out if you don't know how to. -
I recently upgraded to Lion on an iMac and I am trying to run Garageband but get message telling me that the instrument library is invalid and I should choose a valid Instrument Folder or re-install Garageband. Where do I find such a folder?
Thanks very much. Yes, I am using the installer files and serial number from the URL you referenced above. I have spent many hours trying to get it to work. I would love some help!!
The problem is that the instructions that come in the pdf with the downloaded files do not work, because the files that download from that page do not have the names referred to in the pdf, and most of the things that are referred to in the instructions do not happen. Here is what actually happened.
When I downloaded the files from the website, these are the files that downloaded:
I double-clicked each one and they extracted into two different folders.
Then I read a message on the forum that said to move all the extractred files into the same folder, so I moved all files into one file at C:\Creative Suite CS2\Adobe Creative Suite 2.0 as was pictured in the forum message. Here are screen shots showing all of the files in that folder I have now:
So then I double clicked the "Setup" file and I got this error message:
So then I tried to install the programs separately from the installer inside the folders Photoshop and Illustrator. I got this far and entered the serial number from the website:
But then I got this error message, even though I was using the files and serial number exactly from the website:
I tried both photoshop and illustrator and the same thing happened.
(I also looked at Solution 2 that you mentioned above but I don't have anything called VCOM on the computer. Also the error message that I got is not that one.)
I think I really need a set of instructions that lists the steps in order to do, but based on the files that actually download from the website and what happens when you extract the files. I feel as if I have all of the proper files but it still doesn't work.
Thank you very much! -
I have a macbook pro and use BT homehub 3. can't work out how to connect my time capsule. can anyone help? thanks
Just need to plug the TC in to the hub in bridge mode.. do not try and bridge the homehub.. it is not possible with the setup BT uses.
To bridge the TC.. plug it directly into a computer by ethernet.. no other connection to the TC or the computer.
Press and hold in reset until the front LED flashes rapidly.. about 10sec.
Release the reset.
Open the airport utility and setup the TC to bridge mode.
The actual method depends on version of the OS and airport utility you use.
This is version 5.
Sorry I cannot post the v6 as I am on a snow leopard computer now. But you go to the network tab, and choose off bridge mode for method of connection. It will be NAT and dhcp by default.
Then setup wireless.. you have a number of choices here.
Either setup with the same SSID Security and password, as the homehub uses.. or a different name, and password..
Each method works fine.. but you sometimes have issues with wireless channels.. for now leave it on auto and see what happens.. if you have issues lock down the radio channels on both devices.. use one out of the following on each, 1, 6, 11 or 13 in UK.. so say 6 on the homehub then 13 onthe TC.
Update the TC.. unplug fromt the computer and plug it into the homehub.
If you have other issues with the setup tell us what OS you run so we can post suitable screenshots. -
I prepare chronologies in word, and I am trying to do the same in pages using tables and cells. But sometimes I need a cell to wrap onto the next page because the contents are bigger than the page or the space left on the page, but I can't work out how to do it - any suggestions would be greatly appreciated
brendanfromsydney wrote:
What are the different opinions on why pages should not achieve this?
As far as I know, Apple is free to choose to offer this or that feature.
They never said that they want to clone Word or even compete with it.
Differences between tables in both worlds are numerous.
In Pages (or Numbers)
- we can't sort a single column
- we can't sort by row
- we can't insert or remove a single cell
- a cell can't cross pages boundaries
If I understand well these design choices match :
++-+-+-+-+-+-+-+-++
Apple Human Interface Guidelines:
Apply the 80 Percent Solution
During the design process, if you discover problems with your product design, you might consider applying the 80 percent solution‚ that is, designing your software to meet the needs of at least 80 percent of your users. This type of design typically favors simpler, more elegant approaches to problems.
If you try to design for the 20 percent of your target audience who are power users, your design may not be usable by the other 80 percent of users. Even though that smaller group of power users is likely to have good ideas for features, the majority of your user base may not think in the same way. Involving a broad range of users in your design process can help you find the 80 percent solution.
+-+-+-+-+-+-+-+-+-++
Yvan KOENIG (VALLAURIS, France) jeudi 9 juin 2011 16:03:52
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer ! -
HT5621 d is still registering the old ID and I can't work out how to change my icloud Apple ID.
I have changed my out Apple ID for a new one. This has been successful for iTunes etc but not for iCloud. I can't seem to work out how to change my account which is the email address used for my old Apple ID.
To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted (if using iOS 7), then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
I can't figure out how to set the history to only save 2 days. Is there a way. Thank you
I have tried to figure out how to set my history to only save 2 days. I am sure that in previous version of firefox that this option was available where as in this one I don't see that. So I am either blind that I can't find it in the history option or it doesn't exist. It seems the options are remember history no limit or always to remove when closed. I want the options of setting how many days not the other two. Is there a way to do that? Thank you.
No need to crop your clips. The mask does the cropping of the upper clip.
To use the image mask, you need an image to place into the drop zone in the inspector. In your case you'd want a simple black to white gradient as the image mask and choose Luminance in the Image Mask source luminance pop-up. I'm attaching a sample gradient. The original was 1280x720 to match a 720p movie but the forum shrinks it down. This gradient was created in Photoshop in less than 30 seconds.
You import this gradient file into your event. Click on the Mask Source in the Image Mask effect and then click on the gradient file in your event list and click Apply Clip. Change the Mask Source to Luminance. Change the offset mask parameters to move where the gradient lines up in your movie. -
I can't work out how to transfer my photos and what not from my iPhone 4 to my iPhone6 via iCloud
I've recently purchased an iphone 6 and am trying to transfer all my photos and documents from my iphone 4 to my iphone 6 via iCloud.
However I can't seem to work out how to do it.
Please someone help!If you're backing up your iPhone 4 to iCloud, I believe you can just restore your 6 from that backup.
What have you tried?
~Lyssa -
I am trying to download iPhoto on my MacBook Air. I am told I need IOS 10.10. I cannot work out how to get that. I am told that my updates are up to date when I check.
Never mind got the answer!
-
I can't sign on to icloud. It says I need an icloud account. I click the help option it send me back to the same page. I reinstall it nothing.
Download the iCloud Control Panel.
To enable iCloud on your Windows PC, first set up iCloud on your other devices, then install the iCloud Control Panel for Windows (Windows Vista with Service Pack 2 or Windows 7 required).
ok I can't seem to set up iCloud on any device I don't understand... Ive already installed it three times.
Turn on iCloud.
From the Windows Start menu, choose iCloud Control Panel.
Enter the Apple ID you used to create your iCloud account and select the iCloud services you’d like to enable.
For mail, contacts, and calendars, you can use iCloud.com or Outlook 2007 or later.
there is no iCloud control panel but I click on i cloud. Then entere the Apple ID you used to create your iCloud account - WHAT!!!!? where is this I keep trying to find out how to create and iCloud account but I keep getting these stupid directions!!!
Enable automatic downloads.
To enable automatic downloads for your music, apps, and books, open iTunes > Edit > Preferences > Store and select Music, Apps, and Books.* (Requires iTunes 10.5 or later.)
- This is the only step that makes sense and already did it...
Turn on iCloud for the rest of your devices.
To get the most out of iCloud, set it up everywhere.
This is soooo frustrating!!!!
Also I want to be able to look at duplicate songs on my itunes but after I downloaded the new version I can not figure out how to get that back. If the duplicate setting isn't in the new itunes I want the old version back.Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.
-
I have installed my lexmark x1100 printer to my macpro lion but though it registers its there it keeps telling me that the inkjet pots are not in position or wrongly inserted, how can I overcome this problem which is driving me crackers!!!!!
Thanks for the additional info. If the printer works using your Dell Laptop, then the printer is working fine. The problem is with the driver. The Lexmark X1100 is only compatible up to Mac OS 9.2.2. If you have the Mac OS X, unfortunately, it's not compatible with that OS.
You might want to consider purchasing a new printer - preferably a network printer since you have multiple computers. We do have printers that are currently on sale online. You can check it out here: http://bit.ly/KQBDe0
Those printers are compatible with the newest Operating Systems both for Windows and Mac. It also has drivers for Linux. -
Can't figure out how to set my midi controler to control the sampler!
I have a Korg Kontrol49 and I want to be able to control the sampler knobs and faders with the ones on my Korg. I have it connected threw USB. It works for the keys but I can not figure out how to program the rest of it. Any help would be great. I tried reading everything I could to get it to work but I cant. Please help!
Thanks
Mac Pro Mac OS X (10.4.8)Press Command-L. Touch the onscreen control. Twiddle your MIDI knob. Assignment learnt.
Then go read the manual on Controller Assignments... -
I can't figure out how to set a breakpoint in a SenTestingKit unit test
I'm learning Cocoa after decades of doing other languages. I'm trying to use SenTestingKit for unit tests. One of my unit tests doesn't work, and I want to set a breakpoint to figure out why. So far, I haven't figured out how to do this.
I found Chris Hanson's instructions for how to do this, but he apparently wrote them for an earlier version of Xcode, and I don't know enough to adapt them.
I am writing a tutorial document for writing a simple Cocoa App using Xcode 3.1, git, SenTestingKit, and OCMock. It's at http://xorandor.com/FirstCocoaApp. I've got it up to the point of trying to debug a unit test, and I'm stuck there.
I also couldn't figure out how to have Xcode run the unit tests while building the application. Again, Chris' instructions didn't quite do it, and I don't know enough to figure out the rest.
So, if you know how to do this, please give me some hints. I'll put those into my tutorial, so that the next people who need this can find it.
Thanks,
PatI figured out more of my problem, but I haven't solved it yet.
What happens is that, after I create a test case, I try to run it with a breakpoint. After I start the program, Xcode turns the breakpoint from blue (meaning active) to orange (meaning that it can't set the breakpoint).
Several people have said to turn off the Lazy symbol loading preference. I did that, and that didn't fix the problem.
I wrote up a detailed list of steps that I took at http://www.xorandor.com/DebugQuestion.txt
I also put a copy of the project file at http://xorandor.com/MyProject.tar
If anyone has any suggestions on what to try next, please let me know.
Thanks,
Pat -
Can't figure out how to set a frame width
Noob questions I suppose....our instructor has us creating a
site using only framesets. I realize this isn't the best way to go,
but we are leading our way up to CSS.
If you look at my navbar, it needs to be 125 to be able to
fit my buttons, but I can not for the life of me how to set the
width of that frame.
Also, how do I name the site on the index file from "untitled
document" to what I want. I know how to do it on individual
pages... or normal index pages, but here, it does not seem I can
pull up the index file alone without everything being loaded and no
way to edit the index file.
Edit: Forgot to provide the link:
http://www.webrevamps.com/assignment10/index2.html
And the pages should not scroll. Hopefully I did that right.
Thanks!Your instructor should be relieved of their duties. Nobody
should be
mentioning frames nowadays except to note that they are
antique and should
only be used on special occasions, and that their use will be
left up to the
reader to determine.
> If you look at my navbar, it needs to be 125 to be able
to fit my navbar,
> but
> I can not for the life of me how to set the width of
that frame.
You set the width of a frame the way you'd expect to - in the
frameset page
definition. When you create a framed site, you first create a
frameset page
that defines the width and height of every frame in the
frameset, e.g.,
<frameset rows="80,*" cols="*" frameborder="no" border="0"
framespacing="0">
<frame src="UntitledFrame-112" name="topFrame"
scrolling="No"
noresize="noresize" id="topFrame" />
<frameset cols="80,*" frameborder="no" border="0"
framespacing="0">
<frame src="UntitledFrame-113" name="leftFrame"
scrolling="No"
noresize="noresize" id="leftFrame" />
<frame src="UntitledFrame-114" name="mm_target"
id="mm_target" />
</frameset>
</frameset>
This defines a frameset containing two rows, one of which is
split into two
columns. The top row is 80px tall, and the bottom row is
whatever is needed
to fill the browser's viewport in height. The bottom row
contains two
columns, the leftmost of which is 80px wide, and the
rightmost is whatever
is needed to fill the browser's viewport.
As mentioned, if your instructor hasn't given you this
information they are
doing a double bad job.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"motleyscrewed" <[email protected]> wrote in
message
news:[email protected]...
> Noob questions I suppose....our instructor has us
creating a site using
> only
> framesets. I realize this isn't the best way to go, but
we are leading our
> way
> up to CSS.
>
> If you look at my navbar, it needs to be 125 to be able
to fit my navbar,
> but
> I can not for the life of me how to set the width of
that frame.
>
> Also, how do I name the site on the index file from
"untitled document" to
> what I want. I know how to do it on individual pages...
or normal index
> pages,
> but here, it does not seem I can pull up the index file
alone without
> everything being loaded and no way to edit the index
file.
>
> Thanks!
>
Maybe you are looking for
-
I am trying to sync my iphone with a new itunes library. The iphone is askin for an 'exchange' password. I don't know what this is or where to find it.
-
How can I block a wifi signal that is overtaking my connection?
I am having a problem with a new network detected by all my apple products-iPhone 4s, MacBook Pro running lion and older g4 I book running snow leopard. The network Is called NOTFREE and had two signals - one secured and one unsecured that says guest
-
How do I fill the center of this in??
Hi folks, Attached is a backing for a logo I am using. It is swirls that I then put text in the middle. Works and looks fine when I place text and have the middle transparent however I need the middle to be a solid colour also. I may be a little dim
-
Warning on Gen2 1TB drive failing
I have seen a few posts and now within a couple of weeks have seen the 1TB drive A1302 fail. The drive is a WD black caviar.. I am sure posting this warning will not help many people.. other than posthumously.. These drives seem to be failing in larg
-
Setting PREFIX for DIMENSION_TABLE using OMB Scripting
I'm trying all day to find a way to set PREFIX for DIMENSION_TABLE using OMB script without success and I'm a little confused now. First of all Scripting Reference does not mention about PREFIX property so maybe there is no way to achieve what I want