I have downloaded ITunes 10.7 repeatedly and everytime i go onto the ITunes store it comes up with an error measege

i have downloaded ITunes 10.7 and i have done quite a few times and everytime i open it i go to the ITunes store and it keep saying unknown erorr (-3221) and it keeps saying the same evry time i uninstall it and re-install it. Help please!

The 3221 suggests security software trouble.
Have you worked through the following document in the course of your troubleshooting to date?
iTunes: Troubleshooting security software issues

Similar Messages

  • I dropped my iphone4 on the ground , now it is stuck in recovery mode with itunes and usb , when i do the restore process it comes up with an error(21).. what should i do? plz help

    iphone stuck on recovery mode,,, cannot restore due to error 21. tried all ways to solve the error, but no use... plz help

    Hi D’pak,
    Thanks for using the Apple Support Communities. I understand that you are receiving error 21 when attempting to restore your device in recovery mode. The following resource provides troubleshooting information for this error message:
    Get help with iOS update and restore errors - Apple Support
    http://support.apple.com/en-us/TS3694#hardware
    Check for hardware issues
    Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
    Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Make sure that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.
    - Matt M.

  • I have a Ipod touch 2nd generation, and everytime I go into the app store to download spotify, it says i already have. But I can't find it anywhere. help please!!

    My ipod touch 2nd G says that it downloaded spotify, but i can't find the app anywhere. i downloaded it over itunes on my computer, because it wouldn't download on my ipod.

    Create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
    Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
    Using those instructions you may also be able to select PayPal if that is allowed in your country.

  • I have submitted build by xcode 6.1 but in itunes account shows us Apps and app updates submitted to the App Store must be built with Xcode 5.1.1 or later, and iOS 7 or later SDK after clicking the submit for review.

    I have submitted build by xcode 6.1 but in itunes account shows us Apps and app updates submitted to the App Store must be built with Xcode 5.1.1 or later, and iOS 7 or later SDK after clicking the submit for review.
    Please tell me the solution as soon as possible and i am able to remove the build.

    You have used Xcode 6.1 and it is a valid version, so you should not have any problem. Anyway, if there is any problem, Apple will contact with you to fix it before your app is published.

  • ERROR ITMS-9000:"This bundle is invalid. New apps and app updates submitted to the App Store must be built with public (GM) versions of Xcode 5.1.1

    I submitted my IPA file to Itunes Connect using Application Loader and got the error message below. I have AIR SDK 13.0.0.111 and using Flash Builder 4.6.
    Please help. Thank you in advance.
    ERROR ITMS-9000: "This bundle is invalid. New apps and app updates submitted to the App Store must be built with public (GM) versions of Xcode 5.1.1 or higher and IOS 7 SDK. Do not submit apps built with beta software." ...

    Hi!
    I'm also using Air SDK 15 and I'm getting  Invalid Bundle Error:
    Adobe Air iOS Invalid Bundle
    The bundle does not support the minimum version os specified in info.plisthttp://stackoverflow.com/questions/26047837/adobe-air-ios-invalid-bundle-the-bundle-does-n ot-support-the-minimum-version-os
    Really need help
    Michael

  • Apps and app updates submitted to the App Store must be built with Xcode 5.1.1 or later, and iOS 7 or later SDK.

    Hi Guys,
    i am receiving this error since last 3 days please help me resolve this.
    i am already using XCode 5.1.1 and iOS 7 SDK i have regenerated my app store provisioning profile twice after this issue.
    my app gets validated by Xcode and also gets uploaded successfully through Application Loader (i.e. latest one 2.9.1 i believe)
    but in itunes connect when i try to submit my app for review i receive this error.
    "Apps and app updates submitted to the App Store must be built with Xcode 5.1.1 or later, and iOS 7 or later SDK."

    I'm getting the same error as well, using Xcode 6.1 (6A1042b) on OSX 10.9.5.  My project settings in Xcode have “Deployment Target” as “7.0” and “Base SDK” as “Latest iOS (iOS 8.1)”.  I uploaded the app via Xcode, not with the application loader and I've tried re-generating my distribution provisioning profile.
    This is an update to an existing app which was previously built against iOS 6.0 sdk but all attempts to submit the update now produce the error message "Apps and app updates submitted to the App Store must be built with Xcode 5.1.1 or later, and iOS 7 or later SDK."

  • IOS app submission bundle is invalid.New apps and app updates submitted to the app store must be built with public?

    Hi,
    I am using Xcode 4.6 with SDK 6.0. I tried to upload new binary in appstore.But its failed.Error message:"Bundle is invalid.New apps and app updates submitted to the app store must be built with public?"

    Hi,
    I'm using xcode 5.1, sdk 7.1 target 7.1 and still have the issue.
    It is an update of an app built 2 years ago.
    thanks
    Jozo
    can the problem be deprecations (in app purchase code)?

  • TS2516 an error occurred uploading my iPhoto Book order. It puts the book together and starts to send but at the very last moment comes up with an error message. but checking the book in iPhoto there are no problems to be found.

    an error occurred uploading my iPhoto Book order. It puts the book together and starts to send but at the very last moment comes up with an error message. but checking the book in iPhoto there are no problems to be found.

    This user talked to Apple Support personnel and confirms what Larry is suggesting:
    crowland1066
    Re: book upload fails
    Nov 30, 2013 3:02 PM (in response to pablo123)
    Just got off the phone with apple support.  If the photo book completes the assembly process but fails during the upload process the problem is in their overloaded servers.They just started a free shipping promotion for the holidays which has increased the traffic dramatically. I bought a calendar a week ago and it went right through. I'm going to try again during less peak times.
    Happy Holidays

  • IOS app Validate : Error bundle is invalid.New apps and app updates submitted to the app store must be built with public?

    I am using Xcode 5.1 with SDK 7.1
    I tried to validate  new version in appstore.But its failed.Error message:"Bundle is invalid.New apps and app updates submitted to the app store must be built with public?"
    On Apirl 18  ,I can submit last version

    It would help if you posted your problem in the form of a question.
    What version of Xcode are you using?

  • This bundle is invalid - New apps and app updates submitted to the App Store must be built with public (GM) versions of Xcode 5.1.1 or higher and iOS 7 SDK. Do not submit apps built with beta software

    Does anyone can help me on this issue from Apple Developer?
    This bundle is invalid - New apps and app updates submitted to the App Store must be built with public (GM) versions of Xcode 5.1.1 or higher and iOS 7 SDK. Do not submit apps built with beta software
    Is there a new Flash CC - Adobe AIR SDK to solve this?
    Best

    Looks like there's some hope:
    Re: App Store must be built with Xcode 5.1.1 or later !

  • This bundle is invalid new apps and app updates submitted to the app store must be built with public

    this bundle is invalid new apps and app updates submitted to the app store must be built with public

    It would help if you posted your problem in the form of a question.
    What version of Xcode are you using?

  • Starting February 1, new apps and app updates submitted to the App Store must be built with Xcode 5

    Apple send out this message:
    "Starting February 1, new apps and app updates submitted to the App Store must be built with Xcode 5 and iOS 7 SDK. Learn more about building apps for iOS 7."
    A few questions about this to Adobe:
    - Which AIR SDK version is prepared for this ?
    - Do we need to recompile all ANE's ?
    Cheers.

    Hi All,
    The issue has been fixed and the build 4.0.0.1619 is available at
    http://labsdownload.adobe.com/pub/labs/flashruntimes/air/air4-0_sdk_mac.tbz2 for mac and http://labsdownload.adobe.com/pub/labs/flashruntimes/air/air4-0_sdk_win.zip for window. Please let us know if you will face any issues.
    Regards,
    Nimit

  • New apps and app updates submitted to the App Store must be built with Xcode 5

    I just received an email from Apple Developer saying that:
    "Starting February 1, new apps and app updates submitted to the App Store must be built with Xcode 5 and iOS 7 SDK."
    Does anyone has any idea how will this impact on those who build iOS apps using Flash cc?

    Hi All,
    The issue has been fixed and the build 4.0.0.1619 is available at
    http://labsdownload.adobe.com/pub/labs/flashruntimes/air/air4-0_sdk_mac.tbz2 for mac and http://labsdownload.adobe.com/pub/labs/flashruntimes/air/air4-0_sdk_win.zip for window. Please let us know if you will face any issues.
    Regards,
    Nimit

  • Ok guys i need help my ipod touch froze during an update now i put it inot the recovery mode or dfu and it will not reset itself at all it comes up with an error code and says this ipod cannot reset now does anyone have any ideas of what to do with it

    ok guys i need help anyone with my ipod it froze during an update now it will not work at all i ahve put it into the recovery mode or dfu and  it will not reset it self it comes up with an error message 1603 the number is and says the ipod cannot be reset anyone please help me i have tryed everything googled you tubed everything

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Error 1603
    Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.

  • I just installed 10.2.2. When I tried to start iTunes, I got the message that Rosetta needed to be installed to open iTunes. It downloaded and installed Rosetta but iTunes will not open and it no longer has the iTunes icon. What do I do now?

    I installed iTunes 10.2.2. When I tried to open it, I got the message that iTunes needs to install Rosetta to open. It then appeared to download and and install Rosetta. When I try to open iTunes, the icon bounces but iTunes does not open. The icon has also changed from the usual iTunes icon. What do I do now?

    I have a 2010 MBP15 which I do not use as much as my pc. When I do, I check for updates and I believe I updated iTunes to 10.2.2 a week or so ago. Since I still use iTunes primarily on my pc, I didn't bother firing up the updated iTunes on the mac.
    Last week, when I actually started iTunes on the mac, I got the message that Rosetta needed to be installed. Like abefighter I stalled. I surfed the net, read this thread to get some hints as to w** was going on.
    When I checked the system profile in the mac, I think it showed PowerPC for 'kind.' Surfing the Internet I found out Rosetta was something needed to help applications work on PowerPCs. But wait, since this MBP is an Intel, why would or should it be asking me for some stone-age plug-in that was never mentioned in all the previous updates for iTunes until now? Fyi, the iTunes icon on the dock had changed to what I think is an AppleWorks icon.
    So, I assumed that the update that resulted in my mac was corrupted. At first I scoured for 10.2.1, thinking that the last version was a dud, but in vain, nowhere to be found. I gave up and settled for a fresh 10.2.2. I did a casual delete, without touching any of the related personal preference files in my folder and it now which works fine. I'm glad I didn't jump to install Rosetta; I read elsewhere about someone who actually went through with the Rosetta install that resulted unhappily.
    Unless the mac in question is a PowerPC, I would doubt the need for Rosetta installation.

Maybe you are looking for