I have finally officially given up on getting my audiobooks
I will never figure out why I can put audiobooks that I purchase from a book store onto my IPOD by changing the extension to m4b, but I can't through my local library. I have the license, I have officially checked the audiobook on line, however it will not let me upload it. Just Venting!
Yes I found that out, but what I do not understand, is that you can upload it into WIndows Media Player, you are officially checking it out of the library website with the license and still nothing. I understand, but I don't understand, doyou know what I mean.....why just windows and not mac?!
Similar Messages
-
I bought an audiobook in itunes on my pc and I can not get it to push to my iphones. Do I physically have to connect to itunes to get the audiobook on my iphone?
Audiobooks are currently a one-time only download, so if you're asking whether you need to connect the iPhone to your computer's iTunes (if that is where you've downloaded it) in order to get the audiobook on it then yes, you will need to sync it the phone, you can't re-download it on the phone.
-
How can I get to use my phone? When I try and dial out it says: 'You have not been given access to this service'
Have you chacked with your carrier. The message you are getting seems to relate to a carrier issue and not something to do with the phone itself
-
I'm running OSX 10.6.8. I have final cut studio 6.0.6. The compressor aps won't load. I get a compressor not loaded properly pop-up. I have tried reloading but still no compressor.
Start by repairing permissions. Then remove Compressor using this utility:
FCS Remover - Uninstall Final Cut Studio, Final Cut Pro, Motion, Compressor, Soundtrack Pro, Color, DVD Studio Pro, LiveType, Cinema Tools
Then reinstall and try to load Compressor. If it fails, post the error statements here.
Good luck -
Does iOS 6 beta 4 is the final official iOS 6?? i am not getting any update for my mobile (which is running iOS 6 beta 4 ) to update to official iOS 6
Take your backups and copy your photos off, then put your device in DFU mode to do a restore.
-
I have just about given up trying to download Mavericks for my 6-month old iMac running OS X 10.8.5. Each time it gets to around 996mb and stops. Any suggestions welcome.
Thanks Giancarlo. The problem turned out to be my modem/wireless router, which has now been replaced and the problem solved.
-
Hi all,
I've been trying to get a semi-complex measure out for over a day now but seem to be going round in circles. Most frustrating is I don't quite understand why one version throws an error, another throws out the wrong number and then whatever you guys come
up with will give me the correct answer!
I have a workbook uploaded here which I used for a different question, but majority of the data model is the same :
https://onedrive.live.com/?cid=1C0322C61F94C9E9&id=1C0322C61F94C9E9%21125
What I'm trying to do is find staff members that are at risk of burn out (eg consistently working > 8hrs a day)
My main timesheet table (Time) is as such:
StaffID (fk to staff table)
ClientID (fk to client table)
TaskID (fk to task table)
TimesheetDate (fk to date table)
EffortInHrs
my date dim is standard fare, only thing i've added is an EndOfWeekDate (eg EOWDate. sunday is the last day therefore for each date for this week the endofweekdate column = 18-jan. For last week it was 11-Jan etc) and I also have a 'last freshed date' that
shows the last time the model was refreshed
A staff member can only record time against a specific task once per day, but they can have multiple tasks across multiple clients for one day
The business rule im working with is
if they've worked more than 8hrs at least once in the last 3 weeks (dates that fall between EOWdate for 'now' minus 3 weeks and EOWdate for 'now' ), then return the sum of EffortInHrs for all clients for every day in the last 3 weeks
I've given up in getting it in one go so i'm trying to cobble together a number of calc columns and measures to get me closer.. but it all seems to stall
eg the following calc column (DailySumOfHrs)
=
CALCULATE (
SUM ( [EffortInHours] ),
FILTER (
ALLEXCEPT ( TIME, 'Time'[TimesheetDate], TIME[StaffID] ),
DATESBETWEEN (
'Date'[Date],
'time'[TimesheetDate],
'Time'[TimesheetDate]
gives me the sum of effort in hrs for the day for each staff member. I couldn't get a measure version of this working. It would either aggregate across all days/staff or give context errors.
So when I tried to take it to the next step to find the max using the same formula
=
CALCULATE (
SUM ( [EffortInHours] ),
FILTER (
ALLEXCEPT ( TIME, 'Time'[TimesheetDate], TIME[StaffID] ),
DATESBETWEEN (
'Date'[Date],
'time'[TimesheetDate],
'Time'[TimesheetDate]
I get errors, i'm guessing because i'm mixing my fact and date tables now and it doesn't know it can use the TimeSheetDate 'context' to filter.
To get the 'last 3 weeks' filter working I added the following to the date dim
=if([EndOfWeek]<[RefreshDateLocal] +7 && [EndOfWeek] > [RefreshDateLocal] -14,1,0)
i then used it in an intermediate measure to get the max at the weekly grain
WeeklyMax :=
IF (
MAX ( 'Date'[Last3WeeksFilter] ) = 1,
CALCULATE (
MAX ( TIME[DailySumOfHrs] ),
FILTER (
ALL ( 'Date'[date] ),
MAX ( 'Date'[EndOfWeek] ) = MAX ( 'Date'[EndOfWeek] )
'Date'[Last3WeeksFilter] = 1
BLANK ()
and finally the measure itself
BurntOutHrs:=if([WeeklyMax]>8,SUM([EffortInHours]),blank())
I am not happy with this at all. There are so many conditions (eg filters added) that need to be satisfied for this to return a sensible result and I need to expose a number of the 'backend' filters that users would need to add to the report to get the correct
answer.
As is, it only works for a simple Staff, date, burntouthrs report. If users attempt to create their own pivot table/chart and try to break it down by client or task it doesn't look right at all. I'd also like to be able to count how much stuff are working
long hrs but this approach wouldn't support that at all.
I could probably post dozens of my attempted dax that to me logically look like it should work but either aggregate wrong or throw context errors. Unfortunately my current approach to dax still is to try various, almost random variations until one works
for whatever reason
I always aim to have a measure that 'just works' in all contexts where it makes logical sense. For me to get that happening here i'd probably need to spend another few hrs trying all kinds of allexcept() conditions for each filter where i want it to work
and hope none contradict each other
Thinking about it now, this isn't really a separate measure at all.. i think a better approach would be to add a calc column to the staff table that checks if that staff member has >8hrs assigned for any day (i dont think the default time->staff relationship
would allow this though). But i'm still interested on how to accomplish it using the separate 'measure' approach
I'll go spend the rest of today trying to get the flag working in the staff dim!
Thanks!
Jakub @ Adelaide, Australia BlogJakubk, is this still an issue?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it! -
Hi,
I have an iPod shuffle 4th generation and an iPod Nano 5th generation . The Nano wheel appears to have stopped working - I can't get it to play or anything. I've done the reset and it worked the first time, but now the only way I can get it to play anything is to shake it and go with the shuffle choices - I can't change volume, song, pause or turn it off.
So, I decided to start using the Shuffle which I was given as a present last year. I've plugged it into my laptop (running windows 8 and newest version of iTunes). It appears in iTunes on the left hand side, but when I click to sync (whether I tick sync all or choose artists) it says synched but has no music. It seems to not be linked to the music library - when I tick synch all songs, next to the "sync music" it says 0 songs?
Any help to fix either would be really appreciated - I'm without any music at the moment and I'm going away this weekend!
ThanksHi Bblairjones,
If you are having issues with your Nano and Shuffle, you may want to try the Troubleshooting Assistants on the following page:
Apple Support: iPod Troubleshooting Assistants
http://www.apple.com/support/ipod/five_rs/
Regards,
- Brenden -
Have you officially joined BPX? How many people have you invited?
For those who are watching the Business Process Expert "general discussion" forum:
The first question is: <b>Have you officially joined the BPX Community here? </b>
If so, <u>thank you</u>. You are one of the 8,328 people who have already joined in only the first four weeks of this community being available. Note, too, that we're still in "sneak preview" mode so we haven't even done any announcements or awareness campaigns! You're in on the "ground floor" with visionaries and leaders.
If you're not an official member yet, please join ... just go to the top of the page in the header under "Profile Management," see the category for "Update Profile," and check the box at the very bottom of that page that says "I would like to join the new Business Process Expert (BPX) Community." Of course it's free and you get the benefits of posting forum questions and answers, blogging, etc. etc.
Please also sign-up for the newsletter while you're already on that page. More than 100,000 people already subscribe and find it valuable. We send a newsletter approximately every two weeks to highlight just a few of the new items and topics -- mostly as a reminder to return to the online community area(s) if you're not already in the good habit of doing so.
Second question is: <b>How many people have you referred to this new community with the recommendation to join?</b>
If you've invited at least three people who have joined, then "<u>thank you</u>!" If they are new members of BPX and SDN (and if they used your name/email as a referrer when they joined), then you received award points as our thanks.
If you haven't yet invited at least three colleagues to join, please do so. We think it'll help them in their jobs and careers, and we think it'll help you in your work with them (they're smarter, better informed, on the same page with their colleagues -- including you...).
Thank you for your membership, participation, and for spreading the word.
Mark Y.I have had numerous issues. Originally, I couldn't get video to work at all in Leopard (worked fine in Tiger). I just recently did all of the following things:
Set QT STreaming to 1.5
Set bandwidth (in iChat) to 500kbps (Comcast)
Deleted iChat prefs and ichatagent prefs
Set parallels network to "host only" (was on shared)
Reset PRAM
Reset security port to 443 (in iChat prefs, server settings)
Restart iChat (obviously)
Right now, all of my buddies are currently offline, but I did test with apple's auto-bots and interestingly, I'm getting video to work with appleu3test01 and appleu3test03, but I get the same connection problem as before with appleu3test02 ("There was a communication error during your chat"). I'm curious what's different about this bot's settings. I'll report more when I get to test with a real person. -
Why do I have to restart my iMac to get Safari or email?
Problem description:
Safari & email freezes, is very slow. I have to restart my iMac to get internet & email.
Do I remove, delete those items in red? Adobe seems to be a problem.
EtreCheck version: 2.0.4 (89)
Report generated October 14, 2014 at 3:10:12 pm CDT
Hardware Information: ℹ️
iMac (27-inch, Late 2013) (Verified)
iMac - model: iMac14,2
1 3.2 GHz Intel Core i5 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
BANK 0/DIMM1
empty empty empty empty
BANK 1/DIMM1
empty empty empty empty
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
NVIDIA GeForce GT 755M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 1:50:31
Disk Information: ℹ️
APPLE HDD ST1000DM003 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (759.34 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.LaCie.ScsiType00 (1.2.13 - SDK 10.5) Support
[not loaded] com.jmicron.driver.jmPeripheralDevice (2.0.4) Support
[not loaded] com.lacie.driver.LaCie_RemoteComms (1.0.1 - SDK 10.5) Support
[loaded] com.oxsemi.driver.OxsemiDeviceType00 (1.28.13 - SDK 10.5) Support
[not loaded] com.wdc.driver.1394HP (1.0.9) Support
[not loaded] com.wdc.driver.1394_64HP (1.0.0 - SDK 10.6) Support
[not loaded] com.wdc.driver.USBHP (1.0.11) Support
[not loaded] com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6) Support
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[invalid?] com.adobe.AdobeCreativeCloud.plist Support
[loaded] com.intego.backupassistant.agent.plist Support
[loaded] com.lacie.eventsactions.launcher.agent.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.intego.BackupAssistant.daemon.plist Support
[running] com.lacie.desktopmanager.service.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.wdc.SmartwareDriveService.plist Support
[running] com.wdc.WDSmartWareService.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[invalid?] com.adobe.ARM.[...].plist Support
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
GarminGpsControl: Version: 4.1.0.0 Release - SDK 10.7 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
3rd Party Preference Panes: ℹ️
Flash Player Support
FUSE for OS X (OSXFUSE) Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 240.01 GB
Destinations:
LaCie [Local]
Total size: 2 TB
Total number of backups: 23
Oldest backup: 2014-09-17 03:34:04 +0000
Last backup: 2014-10-13 15:04:25 +0000
Size of backup disk: Adequate
Backup size 2 TB > (Disk used 240.01 GB X 3)
My Book [Local]
Total size: 3 TB
Total number of backups: 85
Oldest backup: 2012-04-26 01:59:23 +0000
Last backup: 2014-10-13 03:24:25 +0000
Size of backup disk: Excellent
Backup size 3 TB > (Disk size 999.35 GB X 3)
Top Processes by CPU: ℹ️
4% WindowServer
2% mds
0% fontd
0% ocspd
0% AppleSpell
Top Processes by Memory: ℹ️
404 MB WindowServer
309 MB Numbers
241 MB com.apple.IconServicesAgent
198 MB com.apple.WebKit.WebContent
189 MB Mail
Virtual Memory Information: ℹ️
1.63 GB Free RAM
5.18 GB Active RAM
814 MB Inactive RAM
965 MB Wired RAM
1.59 GB Page-ins
0 B Page-outsHi Linc, If it's the Adobe that's a problem, I'm just copying just a few lines...
From Adobe Reader Updater.log
2014-03-27 16:37:29 +0000: Log created
2014-03-27 16:37:29 +0000: URL 'https:/armmf.adobe.com/arm-manifests/mac/11/current_version_url_template.txt' contents: '/{MAJREV}/11.0.06/current_version.txt'
2014-03-27 16:37:29 +0000: URL 'https:/armmf.adobe.com/arm-manifests/mac/11/11.0.06/current_version.txt' contents: '11.0.06'
2014-03-30 17:17:40 +0000: URL 'https:/armmf.adobe.com/arm-manifests/mac/11/current_version_url_template.txt' contents: '/{MAJREV}/11.0.06/current_version.txt'
2014-03-30 17:17:40 +0000: URL 'https:/armmf.adobe.com/arm-manifests/mac/11/11.0.06/current_version.txt' contents: '11.0.06'
From AdobeCoreSyncinstall.log
-install
Install path given:
"/Applications/Utilities/Adobe Creative Cloud/"
Using default path, invalid path given.
Using Install Path:
/Applications/Utilities/Adobe Creative Cloud/
Installing application
Entering non-elevated mode
Got console user: uid=502, gid=20
Returning to elevated mode
Install Language is:
en_US
INFO: AppPath is:
/Applications/Utilities/Adobe Creative Cloud/CoreSync/Core Sync.app
Checking path: /Users/debscomputer/Library/Preferences/Adobe
Is affected by permissions: 0
INFO: Updating Finder bundle permissions 32-bit...
File attribute changed successfully for file:
/Applications/Utilities/Adobe Creative Cloud/CoreSync/Core Sync.app/Contents/Resources/ACCFinderBundleLoader_32.app/Contents/MacOS/ACCFind erBundleLoader_32
INFO: Updating Finder bundle permissions 64-bit...
File attribute changed successfully for file:
/Applications/Utilities/Adobe Creative Cloud/CoreSync/Core Sync.app/Contents/Resources/ACCFinderBundleLoader_64.app/Contents/MacOS/ACCFind erBundleLoader_64
Entering non-elevated mode
Got console user: uid=502, gid=20
Returning to elevated mode
FromAdobeDownload
10/14/14 06:32:35:780 | [INFO] | | | | | | | 18322 | *******************start of Download****************
10/14/14 06:32:35:796 | [INFO] | | | | | | | 18322 | GDE Version is 8.0.0.2 (BuildVersion: 6.0; BuildDate: Sat Feb 22 2014 15:29:30 )
10/14/14 06:32:35:799 | [INFO] | | | | | | | 18322 | The file to be downloaded is https://swupmf.adobe.com/webfeed/oobe/aam20/mac/updaterfeed.xml
10/14/14 06:32:35:799 | [INFO] | | | | | | | 18322 | Going to download the file at /Users/debscomputer/Library/Application Support/Adobe/AAMUpdater/1.0/Data/webfeed.xml
10/14/14 06:38:37:786 | [ERROR] | | | | | | | 18322 | NetDBError error has occured - 8
10/14/14 06:38:37:786 | [INFO] | | | | | | | 18322 | *******************End****************
10/14/14 13:22:58:514 | [INFO] | | | | | | | 3415 | *******************start of Download****************
10/14/14 13:22:58:566 | [INFO] | | | | | | | 3415 | GDE Version is 8.0.0.2 (BuildVersion: 6.0; BuildDate: Sat Feb 22 2014 15:29:30 )
10/14/14 13:22:58:631 | [INFO] | | | | | | | 3415 | The file to be downloaded is https://swupmf.adobe.com/webfeed/oobe/aam20/mac/updaterfeed.xml
10/14/14 13:22:58:631 | [INFO] | | | | | | | 3415 | Going to download the file at /Users/debscomputer/Library/Application Support/Adobe/AAMUpdater/1.0/Data/webfeed.xml
10/14/14 13:23:01:444 | [INFO] | | | | | | | 3568 | thread count is 0 and active thread count is 1
10/14/14 13:23:02:244 | [INFO] | | | | | | | 3568 | **File download complete.**
10/14/14 13:23:02:249 | [INFO] | | | | | | | 3415 | *******************End****************
From Adobe Photoshop CC
=*
08/20/14 12:50:53:559 | [INFO] | | OOBE | DE | | | | 3513019 | END - Installer Session
08/20/14 12:50:53:559 | [INFO] | | OOBE | DE | | | | 3513019 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* =*=*=*
From Adobe Photoshop CC
=*
08/20/14 12:56:39:058 | [INFO] | | OOBE | DE | | | | 3518067 | END - Installer Session
08/20/14 12:56:39:058 | [INFO] | | OOBE | DE | | | | 3518067 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* =*=*=*
From Photoshop Camera Raw
08/20/14 12:57:03:201 | [INFO] | | OOBE | DE | | | | 3519393 | END - Installer Session
08/20/14 12:57:03:201 | [INFO] | | OOBE | DE | | | | 3519393 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* =*=*=*
Thank you. -
how do I set up my Sony HDR-FX1000 to import footage to Final Cut Pro 7, I get an error message "attempt to capture video without a video device selected. Please select a video device in your capture presets and try again."
Hi,
1. Make sure you have the camera connected via Firewire (i link)
2. The Camera is turned to "play" and, if you are capturing HDV, in the camera menu, it is set to i link "OFF"
DM -
I have finally got Exchange 2010 on Windows 7 Home Premium to connect
I have finally got Outlook 2010 on Windows 7 Home Premium to connect to Exchange 2013 installed on a Server 2012 R2 DC a DC that is connected to the local LAN, I have done this by manually setting up the connect via http proxy
settings as follows:-.
URL to Exchange Proxy Server, I had to set to
.co.uk">username@<external_domainname>.co.uk
**Why can I not connect in the same way as I connect to Exchange Server 2010 with just local NTLM Authentication and no proxy settings?.Hi,
According to your description, I understand you want to know why not Outlook connect to Exchange 2010 by NTML Authentication and without proxy setting in LAN.
I guess you may be referring to Outlook Anywhere. In Exchange 2013, Outlook Anywhere is enabled by default, because all Outlook connectivity takes place via Outlook Anywhere. The only post-deployment task you must perform to successfully use Outlook Anywhere
is to install a valid SSL certificate on your Client Access server. Mailbox servers in your organization only require the default self-signed SSL certificate.
However, In a local area network (LAN) environment, Microsoft Outlook communicates with Microsoft Exchange Server by using remote procedure call (RPC) with Transmission Control Protocol/Internet Protocol (TCP/IP). This method provides quick and efficient
access in a corporate network. Within this network environment, we could use MAPI protocol to connect to Exchange 2010. Typically, mail clients on domain-joined computers inside your network use NTLM authentication.
If your want use Outlook Anywhere connect to Exchange server, we have to specify the FQDN of the PRCproxy Server. More information about How does Outlook Anywhere work (and not work), for your convenience:
http://blogs.technet.com/b/exchange/archive/2008/06/20/3405633.aspx
Note: Basic authentication sends the user name and password in clear text. It also requires that users enter domain, user name, and password every time that they connect to the Exchange server. When you use NTLM authentication, the user's credentials are never
sent over the network. Instead, the client computer and the server exchange hashed values of the user's credentials.
Best Regards,
Allen Wang
The problem is, I have the Client Access Role and Mailbox Role on the same server, when I try to connect to Exchange using Outlook, it screws up Outlook when it does the Auto Discover, the only way I can get it to work is by installing the
certificate first, With Exchange 2013 the normal NTLM Authentication used with 2010 does not work with 2013 and you have to use proxy settings but with the NTLM selected instead of basic authentication,
The other problem I am getting is that when I submit a certificate request the locally installed CA having created the request in Exchange, and then complete the installation of the generated certificate, even though when you check the certificate in Exchange
the Alternate Names are there but they are not actually in the certificate and the certificate the does not work.
In Exchange 2010 two certificates are generated one with what looks like just the certificate authority name in it and one with the external name in it, the one with the external name in it appears to be of the wild card format.
Local machines get issued the certificate with just the local name in and the external machines get issued the one with the external name in it.
Is t possible to replicate the behaviour of 2010, desktop machine on the internal LAN do not need outlook anywhere, only the laptops coming in and out need that?.
I have laptop machines on 2011 SBS, set are up to connect from anywhere using the RPC over Proxy with basic authentication which as you say needs passwords but when they connect in the Office the RPC over proxy seems to be ignored and
they connect using NTLM, that is what I want to do with the 2013 setup.
How? -
In IMovie my project view is fine until it is finalized and then images are getting partially cut off on top(people's heads etc) Is there something I can do?
My issue turned out possibly being a larger problem.
All of a sudden the server is in a bad, bad way. 30 minutes to get booted to the login screen. If I try to login I get beachballs for half a second at a time. I type login/password, the screen refreshes and I'm back to the login screen. I can't connect a keyboard/mouse directly to it, because it wants to do the keyboard recognition (I'm not using an Apple keyboard because they're all Bluetooth and I can't get in to do the Bluetooth sync). I can't do Disk Utility, because I can't connect a keyboard to do the key shortcut. I can't do Hardware Test, because I can't connect a keyboard to do the key shortcut. Can't reinstall Snow Leopard Server, because in their infinite wisdom Apple has removed the optical drive, and even if I had the optical, it wouldn't do any good because I can't connect a keyboard to do the key shortcut that would allow me to boot from the DVD.
I tried to do target disk override from Remote Desktop but it won't let me choose my other Mac's Remote Disc as a boot option. It also continues to show the Server as "Offline" even though power is on and it's on the network.
I would do my 2010 Air's USB drive - just to do a Disk Utility and see if it's a drive problem - but I can't tell the Server to boot from the USB stick.
Tried using my iMac as a monitor, that worked for a while, now it just flashes and then goes back to the iMac.
I'm thinking the logic board on this thing is about to die. Which is unfortunate, since my company opted out of AppleCare for this piece of equipment, and the 1 year expired last month. So...if the repair is going to end up being $800, they're going to have to pony up for a new server. -
I have finally uninstalled Flash Player !
Hi
My OS : Widows 7 32bits + all updates
My IE version : 10 + all updates
My Flash Player version : 11.7.700.202
I have finally uninstalled Flash Player because it slows down browsing with IE10 too much.
Each time I install Flash Player : IE10 slows down
Each time I UNinstall Flash Player becomes ligtning fast
I cannot live with that !
I uninstalled Flash Player and I will not look back until there is an adequate solution to this problem.This morning we resolved a problem that prevented Flash Player installations from completing for some of our Macintosh users.
If you encountered this problem, please delete any previously downloaded Flash Player installer and either:
1.) Download the installer again from https://get.adobe.com/flashplayer
2.) Download the stand-alone installer from http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg -
Do I need Final Cut Pro HD when I have Final Cut Studio?
I will be starting my second project on my new mac and using final cut pro. It will be an instructional DVD. This is my first posting and I guess my first attempt at reaching out (baby steps).
I will be borrowing an HD camera (some consumer grade). My Question is do I need Final Cut HD when I have Final Cut Studio installed. I notice Final Cut Pro 5.1.4 has HD import and export settings.
Also, since I have mentioned my project is there any quick reference ideas for a learn to play an instrument DVD, CD or anything.
And lastly as I wonder off my thread a little. Is this Discussion forum my quickest way of getting an answer, I mean is there anyone who will let me bug them from time to time?
Thanks
Mac Pro 1,1 Mac OS X (10.4.9) 2X2 GHz Dual-Core Intel Xeon 1 GB Ram
Mac Pro 1,1 Mac OS X (10.4.9) 2X2 GHz Dual-Core Intel Xeon 1 GB Ram
Mac Pro 1,1 Mac OS X (10.4.9) 2X2 GHz Dual-Core Intel Xeon 1 GB RamI will be borrowing an HD camera (some consumer grade).
Forgot to welcome you to the forum... Welcome.
Before you jump into this project you may want to do some research. The format you are talking about is HDV, highly compressed and some would say difficult to edit with. A search here on HDV will give you plenty to read and probably point you to some interesting articles.
Might also consider why you want to shoot HD at all right now since you will most likely be going to Standard Def for distribution.
You'll find that if you just check in and browse the topics every day or so you'll pick up lots of good information (and probably a few laughs)
If you're looking for examples for this type of project, just hop down to your local music store. Most have "How To" DVD's for sale.
Good Luck
rh
Maybe you are looking for
-
First Day of Week in Gnome Calendar
One day I noticed that the first day of the week in my gnome calendar is was Monday instead of Sunday. I have no idea what caused this change, but nothing I can do seems to be able to change it to Sunday. This is the mini Calendar that pops up when
-
BPM Process not able to view in NWA
Hi, I have downloaded and installed the trial version of NWDS and CE ehp1 server from SDN. The server is up and running. I am able to create the sample BPM process and build and deploy in the server. In order to start the process, if i open NWA and c
-
Cloning a drive out and back in to replace a hard drive.
I recently bought a Macbook Pro and while I like it, it has a ridiculously slow hard drive- 4200 RPM's, which I didn't even know existed. So I bought a new, larger 7200 speed drive. But here's the problem: I didn't get the OS (Leopard) and don't want
-
Exception:weblogic.management.ApplicationException: prepare failed for accounts Module: accounts Error: Exception preparing module: EJBModule(accounts,status=NEW) Unable to deploy EJB: AccountBean2 from accounts.jar: [EJB:011055]Error deploying the E
-
Exit Code: 15 - Media DB Sync failed
Trying to download and install Lightroom 6 and it just sits there at 0% for a long time and then will error out. I have signed out of Creative Cloud, rebooted the computer. Resigned back into Creative Cloud and it still will not even start the downlo