I have iOS 6 on my iPad. I just made and shared an imovie onto iTunes. Where in iTunes do I find my movie?
iMovie said something about finding my video in Uploads or something in my iTunes. Where is this?
Yes. Restore with iTunes. That's your only option. You can restore from the iCloud backup after you get the iPad up and running again. You will have to erase the iPad again after restoring. Settings>General>Reset>Erase all content and settings and then start all over again with the iPad.
The iPad fully functions as PC free, but you are still taking a chance if you don't have a computer to use in situations like this. You still have to "repair" with a computer running iTumes.
Similar Messages
-
Sorry but i have a problem my IPAD has been stolen and i want help to know where is the place of it ? can i send the serial number or anything i want help to know the place of my IPAD and thanks My name is :- Osama Rezk I'm From :- Egypt my icloud ID
<Email Edited by Host>You will only be able to track your iPad if you have find my iPhone active and the iPad is connected to a network.
Take a look at this link, http://support.apple.com/kb/PH2580 -
I have an iPad 4th gen and I am a new user. Yahoo says I need to update my safari. What should I do?
If you had a yahoo or gmail account, we might be able to help you, but Earthlink is the source you need guidance from. Sorry I can't be more helpful.
-
HT4623 I don't have iOS on my iPad. What's the next best software upgrade?
iPad runs very slow. Do I need to upgrade software?
Yes you have iOS on the iPad - you have to have some version of it. You may want to trouble shoot the slow iPad before you update to to iOS 6 which is the next version.
Try this and see if it helps. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Try this a well. Quit all apps completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. -
Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
just bought 3 ipads for the family over the weekend at the flea market. they were all in closed sealed boxes. 2 ipads synced just fine and are working great. the 3rd however is being an issue. it says that it is already linked to an email. does that mean it is stolen? all material and serial nu,bers match up everywhere. was wondering if this could be fixed by me, apple store, or should i be a good samaritian and turn it over to the police with the receipt and where and who i bought it from?
Or it could simply have been sold by someone that didn't know enough to wipe it.
You could check with the police, see if they have it listed as stolen.
If you can get into the settings of that ipad you can 'erase all content and settings' and start fresh. -
I have receive my new ipad 2 last wek and found scratched behind.what should the steps to cliam at JB area
The iPad was sealed in the box when I got it. It had the plastic screen protector wrapped all around it and when I powered it on for the first time it displayed the "connect to iTunes for setup" message displayed. The only other thing I can think of is if the person I bought it from had ordered it through Verizon on and the iPad was set up on a number on his pre-existing verizon account. My question is should I just keep using it and consider myself lucky? Since there is no way for Verizon to charge me for the usage because I never signed a contract. I realize that if it is on the account belonging to the person I bought it from, they will eventually figure this out and shut it off. But I might as well use it in the meantime right?
-
I have plugged in my ipad to my computer and Itunes is up on my computer but where do I find these things in Itunes, # In iTunes, select your device. # In the Summary pane, click Check for Update, to update my ipad?
Tap to enlarge.
-
I have a new macbook pro and just made a video on imovie and it asked me to put it on idvd but there is no idvd listed as an option. How can i get idvd. it doesn't seem available
Since Apple has stopped supporting and offering iDVD you'll need to purchase the iLIfe 11 disk from a 3rd party retailer like Amazon.com: iLife 11 which will include iDVD 7.
OT -
i have a seal pack ipad mini 1 wifi and i want to upgrade to ipad mini 2 retinal display wifi is this possible , that apple take my ipad 1 wifi back and give to me new ipad retinal display wifi , i live in india, bhopal city
Your only option is to sell the iPad and then buy the new one.
Cheers, Tom -
I have bought the verizon iPad 2 from US and want to use it in India. How to set up the Indian CDMA carrier on my iPad 2 ?
rahulmcadit wrote:
The phone is from UK and the carrier on which phone has been locked is "ORANGE". I want to use the same phone in India. I want to unlock the phone. Can you please suggest me what is the procedure to unlock the phone. How can I pay the amount to ORANGE carrier and can use my iphone in India.
Contact ORANGE to unlock it.
See this -> http://support.apple.com/kb/HT5014 -
After installing new itunes version why would I have to restore my ipad to factory settings and now it is doing nothing. itunes won't work ?
Please help me ! I don't understand why I had to restore to factory settings and then when I tried to re-sync it kept telling me iTunes is not working. Why ??
-
How do I update my iPad2? I don't have iOS 5 but I want the latest and best software update possible. However, I've plugged into my computer but am unsuccessful. Please help, what do I need to do?
See below.
http://support.apple.com/kb/HT4972 -
I have recently purchaced an ipad 2 16gb wifi and somebody told me if i wanted to use 3g or connect to the internet whaere i cant get and wifi i can connect my iphone to my ipad and use my iphone 3g is this true?
Yes, that is the Tetheringn or HotSpot option. Some models have this. You will have to set up your phone to do this, and your carrier will likely charge you an extra fee for the tethering service.
-
Just updated my iPad 2 to OS7 and now I can't connect it to iTunes 10 on my MacBook OS 10.5.8
My MacBook is too old and can't be updated to Mountain Lion as it is early 2008 white MacBook.
It all worked perfectly prior to updating the iPad 2 to OS7.
There were no cautions or warnings
Are there any work arounds?
Can I uninstall OS7 and go back to OS6?
Rediculous thing is I can connect to iTunes on an old PC of the same agemozzrich wrote:
Thanks for your comments but this doesn't help my situation at all.
Again Apple fails to provide backward support for its own products.
I could go to the trouble of hacking the MacBook and running Mountain Lion and iTunes 11 that way
I think I will just move across to a PC as a result of this Apple strategy and I think I will just give up on Apples short lived product strategy.
A laptop that lasts five years indicates a long lived product strategy. Where they go wrong is to prevent backwards strategy when someone genuinely cannot live with ios7 like you. even the "unsupported" downgrade has now been blocked.
Don't go windows, you will not get five good years from a dell or an asus. If you can't buy Mountain Lion for it, get a new macbook, enjoy.
Maybe you are looking for
-
How do I turn off the shuffle function for a list of songs on my iPod touch?
I cannot get my iPod touch to stop shuffling songs. I have an audiobook that I've downloaded and cannot get it to play the songs in order. There is no shuffle button to turn on or off, either. Please help!
-
Hello All, There are four steps in my web application; 1> Instead of the standard navigation block web item , we would like to use the normal html drop down box for the filter values. This step is done, but the html drop down box displays an extra op
-
URGENT!!! - Applying existing credit memo to existing invoice
Hi All, I have found a package (not a public API) which can be used to applying existing CM to existing INV, package is 'ARP_PROCESS_APPLICATION.CM_APPLICATION'. There are many input parameters that need to go in but I am just listing out the ones id
-
Problem Consuming webservice -- SOAP UI
Hello Gurus, We have generated a web service from SAP and trying to consume the web service from SOAP UI (external tool), but the SOAP UI tool is generating some error as mentioned below. Exception_Name> CX_ST_MATCH_ELEMENT Exception_Text> System exp
-
Guided access unavailable.please contact your administrator
How do I get a sign that says... Guided access app unavailable. Please contact your administrator. Off my screen