I have ipod nano with 7 generation and I would buy a Polar Wearlink Transmitter Nike Plus to view heart beats . Is this product compatible with nano?
I have ipod nano with 7 generation and I would buy a Polar Wearlink + Transmitter Nike+ Plus to view heart beats . Is this product compatible with nano?
I have the same issue! I purchased a nano 6th, polar hrm so I could run and receive spoken feedback when my heart rate was outside my preset zone. My suunto t3 used to beep when outside the preset zones. Automatic, periodic beeps or spoken feedback is the most important information to receive during exercise. I hope apple can update the software to add this simple yet critical feature.
Similar Messages
-
I have Lpod touch iOS 5.0.1 and I would like to know if I need any software to have mirrot screen using HDMI connector and FHD TV?
While the 4G iPod support HDMI TV out, only the iPad 2 supports mirroring TV out via HDMI and VGA.
-
i have ipod touch 4th generation and i face problem as i connect the handsfree and i haveto adjust it for proper sound so somebody guide
See:
iOS: Device not recognized in iTunes for Windows
I would start with:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP -
Hey Guys, I have Ipod Touch 2nd generation and it needs to be upgraded to iOS 4.3 but the music isnt on my computer. I don't want to loose the music but I really want to upgrade it. Help!
That iPod can't be upgraded past 4.2.1.
(71930) -
Hi i have a 32gb model iPod touch 5th generation 32gb model I would like to exchange for a 64gb model
how much more will it cost if I excgange my one for a new oneUnless you bought the old iPod touch within the last 14 days, it’ll cost you at least 90% of the price of a new one if done through Apple; it’d probably be better to sell it somewhere else.
(122368) -
I have an ipod nano 7th generation and can not get it recognised by my Windows 8.1 laptop (it appears briefly on My computer, then disappears). This happened after I updated iTunes to the latest version. Does that have something to do with it?
Hello there, kiwilucea.
The following Knowledge Base article offers up some in-depth steps for troubleshooting your issue:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Keep in mind if you get to Step 12 Reinstall iTunes, those steps need to be followed exactly as outlined for the reinstall to be effective.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I have my ipod nano 5th generation and when i plugged to my computer it is recognized but i cant do anything. On the ipod all i can see is a blackscreen with the apple sign! How can i fix this?
Howdy Lumagofe,
I was thinking that you may need to reset the iPod Nano, outlined here How to reset iPod http://support.apple.com/kb/ht1320.
Press and hold the Sleep/Wake button and Volume Down button simultaneously for at least eight seconds or until the Apple logo appears. You may need to repeat this step.
If the above step did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.
If that doesn't quite get the iPod going again, then it will need to be restored. Use this article to help with that Restoring iPod to factory settings http://support.apple.com/kb/ht1339.
All the very best,
Sterling -
I have an iPod nano 2nd generation and I want to download the songs I have on it to my new computer, as my old one crashed with all the songs on it. I also got a new iPod and would like to transfer the old songs onto it. How do I do this?
Ok so sorry for clogging the community!! I figured it out - you have to copy your videos into itunes manually. I did that, synched and all good!
-
Just recieved a brand new replacement ipod nano 7th generation and when plugged in to computer it is not registering on computer or with itunes, I have tried resetting ipod. I have uninstalled itunes and reinstalled itunes. I have tried various cables and know they are compatible for charging the ipod, what else could it be?
DarleneHi Darleneann8,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with your iPod nano not being recognized on your PC:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
I hope this information helps ....
- Judy -
I have an iPod nano 6th generation and I downloaded 3 music videos but they won't play on my iPod. They only play on my laptop/iTunes. How can I get it to work? I know that my iPod should take music videos because there is a pre-made playlist called "Music videos". Can anyone help me please????
You can sync the music videos, but they won't play on your 6G Nano, because it does not support video playback. Sorry.
B-rock -
Good afternoon, I would like some information I have an ipod nano 6th generation and has the same one-year warranty is only 2 months of use, and it fell down and broke the glass of the display, I called technical assistance in Brazil and informed me that Brazil has no repair services for Apple, which was the basis of its price change in the exchange is not worth half the value of the product.
I wonder how I do to change this device without the expense of 50% for the same product is in warranty?
Thanks in advance.yes agree, plus a multinational seeing a product and has no technical assistance to do the maintenance then it's no use I buy a new product if it is damaged I will always be because it has no prejudice in this maintenance.
sorry but even more products coming from China to Brazil in technical assistance. -
I have an IPod 5th generation and I would like to delete all personal content, and be signed out of my Apple ID as well, but there are apps that no longer exist on the apple store that I would like to keep.
Do this:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
Then go to Settings>General>Reset>Erase all content and settings -
I have the iPod nano 6th generation, and I have had it since Christmas 2011 so it isn't that old; recently I went to listen to my music and found that the volume increase button is stuck (basically it's like when you press the volume button down to increase the volume, except it is stuck down like that and won't come back up) but it was only stuck about 3/4 of the way down. For about a week this was ok, I just had to press the button harder to make it go down and increase the volume, but now it won't increase the volume at all and it feels and looks as though the button is stuck the whole way in, even when I press the button with some force. I was wondering if anyone knew how I could fix it or if I need to take it to an apple store for them to fix it?!
Sorry if the way I have explained the problem is confusing, it's difficult to explain but it's extremely frustrating.This happened to me a few weeks ago. Instead of taking it to the Apple store and paying $ the 99 service charge ( I did give Apple 139.00 13 months ago! for this ipod), I saturated the end of a q-tip w/ WD 40 and carfefully rubbed around the perimeter of the power button. I waited a half hour and then cleaned of the excess WD 40. This unstuck my power button. I guess the WD 40 dissovled all the dirt under and around (also the consrtuction of the buttons is done w/ double sided tape-- maybe a design issue) the button. A friend tried isopropyl alcohol w/ great results. Try this before you give Appple any more $$ or get a new ipod. It's been 6 wks. and my button functions perfectly,
-
I updated my iPod Nano 7th Generation, and it wiped my iTunes library. I no longer have my playlists or movies. I was able to recover my music, but the many, many playlists I had, I could not recover. Is there any way I could recover them?
Hello apbvieira,
It sounds like your iPod Nano is not recognized in iTunes anymore after a recent update. I recommend the following article to help you get that in order named:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
1. Start with the iPod Troubleshooting Assistant
If you haven't already done so, use the iPod Troubleshooting Assistant that applies to your iPod. This will often solve your issue.
If you're still experiencing the issue after going through each of the steps in the assistant, continue with the steps below in this article. The most likely solutions are listed below (for both USB and FireWire (IEEE 1394) iPod connections). Check each section starting from the top of the list to see if that is what's keeping your iPod from appearing.
Note: To determine if your iPod syncs via USB or FireWire, check the table in the Additional Information section below.
This step will get you started, but there are additional steps in the article if you need them.
Thank you for using Apple Support Communities.
Regards,
Sterling -
I have a older Ipod nano 4th generation and older computer with a itunes librairy on it how do i get that libriary on my new computer and my iphon
iPhone questions should be posted in the iPhone forum area.
How to use your iPod to move your music to a new computer
Maybe you are looking for
-
Iphone 4s cannot auto connect to home wifi after updating to ios 6.1.2
My iphone 4s will not auto connect to my home wifi after updating to IOS 6.1.2. I can manually connect to my phone to wifi but it will get disconnect if I'mnot using the phone. Any way to reslove?
-
Problem with a DDI Device driver for Solaris 8 and 9 on a Sun-Blade-1500
The problem has to do with dma allocated memory and the little-endian format. When I copy blocks bigger than 256 bytes to the dma memory, using a uiomove() or bcopy(), the data after the first 32 bytes is swapped around over 8 bytes. The bcopy from a
-
My iPad air is missing some apps from my phone. It keeps saying, " there is not enough storage available to download...." I purchased additional storage twice, my device now shows 18GB free of a total 25GB, and still I cannot download apps I've had f
-
I am trying to make batch payment in Release 12 via a Payment Manager. The invoice which are selected by the payment process request belong to 2 operating units. The problem comes with the build progam getting errored out. The out file displays the f
-
WM - Storage Type Replenishment
Hi everyone ! I have a little problem with the storage type replenishement in WM. I configured two replenishment movements for 2 storage types : - First one for a storage type that manage the base unit of measure "pieces", and that has a "capacity c