I have just got iPhone 5s and it does not show any Bluetooth connections, my friends with the same phone have no problem my iPhone 5 has no problem there is nothing else connected to the speakers etc
Need help with Bluetooth I can not see anything
Hello Jameshawkins1
Check out the troubleshooting article below for dealing with connections with Bluetooth.
iOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
Regards,
-Norm G.
Similar Messages
-
I downloaded an app from my Ipod touch and it does not show up as an icon to open the app. I went to reinstall the app and it says "installed" How do I find the app so I can use it?
Try using the Spotlight search on the iPod to try to find the app. It is likely that you just can't find it.
-
I have a Ipod touch and am un sure how to connect to wi fi it is asking me to connect to other but I dont know any so what do I put in there
cheersDoes the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I fresh installed LR 3.2 on a Windows 7 computer to try out tethering (which worked fine), but then tried to export the photos, but I don't have any options for exporting to non-harddrive based locations. The "export to" drop down at the top of the export page only has "hard drive" in it. The plugin manager says that plugins for SmugMug, Facebook, etc are all enabled.
Anyone have any ideas?
Thanks!
MikeI found too that the publishing services work differently than the plug-ins. Not as intuitive, but work well just the same, For me I had to do the "set-up" for the Facebook publishing service a couple of times. I think this may have more to do with the Facebook security settings than with LR.
-
so which one do I delete?
You probably only have an orphaned entry left in Add and Remove programs and only have the last update of the Firefox 4 version installed. It happens more often that the updater doesn't remove the entry from the previous installation, but only adds a new entry for the new, updated, version leaving you with two entries. You can use a registry cleanup program or remove the registry key yourself if you are comfortable with editing the registry.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Mozilla Firefox (????) -
My icloud does not show any apps on my iPhone, anyone know where they are?
I logged in to icloud to view and clean up my storage and it does not show any apps, any ideas?
What apps were you looking for? The apps you purchased from the App store will not be there, and unless they are iCloud-enabled apps that sync documents and data with iCloud, they don't take any space in your iCloud account.
You may want to read this article, as it explains various options for reducing your iCloud storage: http://support.apple.com/kb/ht4847. -
I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s. With the new iPhone 5 the radio shows the phone is conected but does not show any music content. Any Suggestions?
You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.
-
I just got my Ipad and I can not download apps. I get a message saying my Apple ID has been disabled. I have reset my password, I can access itunes and icloud but still can not download apps. Can someone please tell me how to get my ID activated? TY
Depending on why it's been disabled you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
If it then works on your computer's iTunes but not your phone/iPad then try logging out of your account on the phone/iPad by tapping on your id in Settings > Store (Settings > iTunes & App Stores on iOS 6) and then log back in and see if that 'refreshes' the account on it -
I have iPhone 6, 8.3. I cannot use bluetooth at all from my device, even to connect my macbook pro. I did all the recommended trouble shooting such as reboot and reset network settings. but it does not recognise any bluetooth device. Pls help.Thank you.
See iPhone BT profile on what can be connected/paired:
iOS: Supported Bluetooth profiles - Apple Support
And BT troubleshooting:
iOS: Troubleshooting Bluetooth connections - Apple Support -
Hello everyone,
I just updated my 3GS from iOS 5.0.0 to 5.0.1
Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.
I tried restarting the phone several times, removing the SIM card several times, but it did not change anything, the SIM is still not detected.You do not need to keep posting the same thing over and over again.
Look to the right side of this page at "more Like this" or do a forum search. -
I ordered at around 12:30AM pacific and it does not show in my order history. When I look it up on the order status page, it just says "received and processing". Do I have any chance of getting it on friday?
It seems to depend on a variety of different things.
Verizon appears to be going by the process time of orders, and not the order time of orders. Your process time will be the timestamp on your confirmation email.
It also depends on which model, GB, and color you ordered. The 6+ were in high demand and low supply.
It also depends on which warehouse (order location) your order was being processed through. Verizon reps have told me that some warehouses have more of certain phones than others, and if your order went to a warehouse that doesn't have enough of that particular phone then you are SOL and will have to back for a backdated order.
There is a possibility you will get it, but if you ordered any of the 6+ models, then it is unlikely. -
Sometimes in a busy area, like a large shopping mall, my WIFI dropdown menu has a dozen or more selections, and my own hotspot (MIFI) does not show up. How do I get the Mac to ignore the dozen other options and find just my MIFI connection?
System Preferences>Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer. -
I downloaded ios7 after being asked to restore. But now my phone wont connect to the activation server and is asking to restore again but I cant because itunes does not show any of my phone information (it just shows a blank white screen with "iphone" in the centre".
I imagine a ton of people are attempting to activate after the update, and the server is getting overloaded. Simple patience, maybe keep trying, and if possible, try a little later. Think of it as all those people lining up at Apple Stores + about a million more.
-
IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black!!
It's happened to me before as well. Try holding both lock(top right) and home buttons simultaneously until u see a slight flash of wight then just reboot it normally. If that doesn't work try restoring your device from itunes
-
just bought an iMac and it does not recognise my existing HP printer which is wifi - how do i connect it to my imac
It should recognize it if they are both on the same Wifi network. Have you signed into the Wireless network on your iMac?
Also, you must go into the Printer and log the printer into the wireless network. If the printer was working wirelessly before, this may have already been done.
If that does not help, tell us the model of the HP Printer.
Maybe you are looking for
-
What is the point of the multitasking bar?
So, I get that for Pandora, Skype, etc. that multitasking is great. I just opened up my multitasking bar though, and found the following "open" items: Messages, Mail, Calendar, Camera, Settings, Map, Weather, Calculator, YouTube, Compass, IMDb, Faceb
-
I have 1 Mac computer running Lion. Can I set up 'find my iPhone' and 'find my iPad' if both of these devices use different Apple ID's than the Mac does? As in, can I set up 'find my "device"' for my husband's iPhone and my daughters iPad?
-
How to use header information in line records while inserting into table?
Hi, Requirement: Data in flat file needs to be loaded into Oracle Tables. File has header information (basically file information, some account info) and Line information ( Actual data need to be loaded to oracle tables). File has position based data
-
Hi All, I have to map the following scenario in SAP. There are three materials A, B & C. We send material B to the vendor. Vendor purchases material C. Vendor adds material B to material C and sends us material A. We pay vendor for material C and lab
-
How to findout COMMUNICATION Channel in ICWEB
Hello all, I have requiremet to findout "communication channel" selected in ICWEB eg. Phone or Email or Fax. Based on that I want to default some values in custom field. Can some body help out in this regard. Regards, Laxman