How to findout COMMUNICATION Channel in ICWEB
Hello all,
I have requiremet to findout "communication channel" selected in ICWEB eg. Phone or Email or Fax.
Based on that I want to default some values in custom field. Can some body help out in this regard.
Regards,
Laxman
Category or Category_txt represents the channel type.
Apply the below given relationship on oneorder object (Interaction record) to get the channel type.
BTOrder->BTOrderCustHist->Category or Category_txt
Thanks,
Thirumala.
Similar Messages
-
How to create communication channels
Hi Experts,
Please help me how to create communication channels and the uses of it.hi,
DO NOT REPLY TO SUCH BASIC QUESTION
Edited by: Prateek Raj Srivastava on Feb 22, 2011 2:10 AM -
How to call communication channel dynamically? Please help!
Hi Experts,
BizTalk -
> XI -
> SAP SYS01
XI|----
>SAP SYS02
We are integrating Biztalk with SAP via XI. BizTalk send rosattenet PIP via JMS adapter to XI. XI then sends the PIP data to SAP system using RFC adapter.
In the PIP we have a parameter for plant code. Now if plant code is 'ABC' then we need to send the data to SAP SYS01 else if plant code is 'XYZ' then send the data to SAP SYS02.
In other words we have RFC communication channel one each for each SAP system.
This is like calling the communication channel dynamically based on palnt code.
How can we do this in XI? Please help!
Thanks & Regards,
Gopal
Edited by: GOPAL BALIGA on Jan 12, 2009 7:35 AMthis is a typical case for a XPATH based conditional routing. note that your receiver will have binding with the interface and the communication channel
ref:
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
/people/shabarish.vijayakumar/blog/2006/06/07/customise-your-xpath-expressions-in-receiver-determination -
How to find communication channels in the database
Hello,
how can I find communication channels in the database? Exists here a webservice or a template to read them out automatically? Has anyone here an idea or experience with it?
Thanks in advance,
kind regards,
Peter MuellerHi stephan,
In XI all the intrgration logic will be stored as Design time objects(Integration Objects) and Runtime objects (Integratin Directory).So there wont be any specific tables that store all of them .But XI holds them in CACHEs called CPA caches and there are different caches too.
Tables in XI
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/xi+tables
For caches:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
Important Tcodes
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/xiTransactionCodes
Thanks,
Ram. -
XI-Multiple instance scenario -File & SQL sender communication channels
Hi
i have a basic question regarding how file sender communication channel ( where we poll for a particular file pattern either using file/ftp types in a particular subfolder ) or a sql sender communication channel - ( selecting records from a sql source ) would work in a scenario with two active XI instances and j2EE file and sql adapter services running on both of the J2EE servers ?
1. How would the file polling from both J2EE servers - avoid a conflict looking for the same file pattern ? Is there any inbuilt mechanism from SAP to make multiple instances work with the file polling - without a confict ?
2. Simlar question for SQL sender type communication channel ?
If SAP does have a mechanism to handle multiple instance scenarios for file and sql sender adapter based communication channels, is there a link/document on this ?Hi Karthik,
Please see my comments.
I am just wondering aloud - what will happen if we use a select for update clause in the sql sender adapter communication channel -
Gouri: Yes you can use select + update. In fact that is the right way.
will this ensure that polling from one J2EE instance will lock the selected records so that the second instance does not select the same set of records from the sql server ? Or should we not use a select for update and use a simple select statement ?
Gouri: Yes. SQL DB will ensure that same data will not be picked by another node. As I mentioned earlier use serilizable option from advanced mode.
-Gouri -
Suppressing Popup screens while controlling Communication Channel externaly
Hello PI Gurus
I have figured out how to control communication channel externally for stopping and starting the channels.
I am trying to write a simple abap code to do this. Since I have several channels, I am putting in a loop. It is doing the job well. However, for each channel a IE screen pops up with the XML data for that particular URL.
I am sure many of you might have been controlling comm. channels externally and might have come across this problem. I would appreciate iif you can please let me know how you got this issue resolved.
Thanks
RamThanks for the response. I appreciate it.
-
How to select a communication channel based on a field in the message?
Hi All,
In my scenario - Sending system will send one country field in the message ,I have one receiver system which has different folders for different countries.
I have created separate communication channels for separate countries.
Now at runtime based on the country field in sender message I need use the channel respective to that country.
How should i achieve this?
Please help.Hi,
Say you have 3 countries - I would suggest:
1) Create 3 services - each for one country
2) Create 1 CC's under each of these services
3) In your Receiver Determination ->Configured Receivers -> Condition field --- put in the condition (by choosing the field from the input that has the country code)
4) Against each condition, choose the respective service for that country
5) Complete the Interface Determination - (by calling the same mapping in all three Interface Determination)
6) Complete the Receiver Agreement by choosing the appropriate CC created as in Step 2)
1) and 2) are basically for ease of use. If you need to identify the Service or CC - this would be user-friendly.
If you dont want to create 3 different services - you can still not do Step 1 and continue from Step 2.
Regards,
Balaji.M -
How to configure receiver communication channel in File to mail scenario?
Hi all,
I'm working in FIle-to-Mail Scenario. I did all the required configuration In Integration repository. As per my Scenario whenever a text file stored in Application server of the R/3 system. it should be sent as a attchment with a mail.so i set a sender communication channel with file adapter in sender R/3 system . i dont know which business system should i refer for my receiver communication channel.because my receiver end is a mail server. should i create any third party business system for this one?
can anyone suggest me to define a receiver comm channel in a right manner?
helpful answers will be rewarded.Hi,
Check these
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm
Regards
Seshagiri -
How can One sender communication channel pick two file from two location
Hello
I have a requirement that how can One sender communication channel pick two file from two location.Both the file has same name...How to configure the one receiver communication channel.i dont have any IR,no mapping..Please help me...>
Soumitra Sinha wrote:
> Hello Vijay
> I already done the adapter specific message attribute.i am getting the file name properly.but that is nothing to do with my req.i am again clearing my problem:
> i have two folder folder a,folder b.Both has the same file credit0002. i have two destination folder i have one sender and one receiver channel.I dont have any IR.How one sender channel can pick file from two location and how one receiver channel can put in two location.please help me..
Ok now I get your requirement.
you cant achieve this - how one receiver channel can put in two location if you dont have a dynamic configuration defined i.e Adapter specific attributes.
easy way - involve IR mapping
else
have a adapter module to define your dynamic configuration.
Ref: /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules & /people/michal.krawczyk2/blog/2006/10/09/xi-dynamic-configuration-in-adapter-modules--one-step-further
Set the dynamic directory/file name etc for your receiver adapter. -
How to set errorDelay parameter in sender JMS Communication Channel?
Dear XI/PI Experts,
Do you happen to have a documentation on how to implement the errorDelay parameter and other general parameters in the sender Sender JMS communication Channel? Do you happen to have a step by step guide or pdf that I can use?
I look forward to hearing from you.
Thanks a lot in advance.
Kind regards,
GraceHi Thanks for your replies.
What I need to do is to implement this bullet point:
¡ errorDelay
The default value for this parameter is 0.
This parameter determines how long the system waits before processing further messages if an error occurs. In transactional processing, it can make sense to specify a certain time period, for example, because messages with errors remain in the queue following a ROLLBACK.
In which part of the Sender JMS Comm Channel will I implement this?
Should I put this under tab /Parameters/Processing/Error Handling Settings or should this be under /Parameters/Advanced/Additional Paremeters? -
How can I log the data transmission of my switch in a file to analyze the quality of my communication channels?
A lot depends on what type of switch you have and what kind of communication channels you're asking about.
There are several Cisco tools (e.g., "ip sla", SNMP-queried values, show commands etc.) that can give useful information.
If you give us some more information we can help more specifically. -
How To Configure XI Receiver Communication Channel ?
Hi Expert,
I have a Scenario wherein i have 2 XI systems & i need to pass the messages between these 2 XI / PI system using XI Adapter. Can any body tell me how to configure the XI Adapter Step by Step. Is it required to Create the SM59 RFC destination with type H. Pl. Explain me in detailed.
Regards
UmeshHi Umesh,
In creating XI receover communication channel, you have 2 options for Addressing Type:
1. URL Address - no need to create RFC destination. You just have to specify the XI receiver host name, HTTP port, path (/sap/xi/engine?type=receiver), Authentication data (logon details for SAP Client number of the PI system).
2. HTTP Destination - create RFC destination in SXMB_ADM and specify the RFC destination name in your receiver communication channel.
For SAP documentation, see this link: http://help.sap.com/saphelp_nwpi711/helpdata/en/e1/091640a991c742e10000000a1550b0/frameset.htm
Hope this helps.
Regards,
Jenny -
How to execute data base view in sender communication channel ?
hi experts
how execute data base view in sender communication channel.?
when i execute select * from data base . ( Its working)
When i execute select * from dbo.view (its showing error )
My Question is there any procedure or syntax execute the views in sender side . ?
Thanks and Regards
G.Praveen KumarThe Error showing
Database-level error reported by JDBC driver while executing statement 'select * from View_abcMap'. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: Invalid object name 'View_abcMap'.'. For details, contact your database server vendor -
HOW TO CREATE SERVICE FOR SENDER SOAP COMMUNICATION CHANNEL FOR ECC PROXY
Hi Experts,
I need generate the service for sender soap communication channel for target url to receive the inbound proxy.
my scenario is like SOAP to proxy. while using receiver proxy also we are planing using AAE method .
i am using SOAP sender and SOAp receiver communication channel .i need to provide the target url for this communication channel.
how to generate the url for this and what is the transaction code .
Please help us.
Regards
Ravinder.SHi Ravinder,
Q.my scenario is like SOAP to proxy. while using receiver proxy also we are planing using AAE method.
SOAP to Poxy in this case.
For sender SOAP system, we can generate the WSDL link in ID part.
for Reveiver proxy give the integration engine URL.
http://IP:PORT/sap/xi/engine?type=entry
how to generate the url for this and what is the transaction code
There is no transaction code for generating the URL.
i hope this will help.
Regards,
Kesava. -
How to encrypt an outbound http communication channel?
How can i take a synchronus outbound communication channel and encrypt it using https? In the dropdown I only see http and rfc destination?
ThanksHi
Have look at this
http://help.sap.com/saphelp_nw04s/helpdata/en/4f/65c3b32107964996a56e4165077e24/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/d0201854fb6a4cb9545892b49d4851/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/55ba9790-0201-0010-aa98-ce8f51ea93cd
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b2e7020d-0d01-0010-269c-a98d3fb5d16c
http://help.sap.com/saphelp_nw04s/helpdata/en/a8/882a40ce93185de10000000a1550b0/content.htm
/people/sap.user72/blog/2005/06/16/using-digital-signatures-in-xi
How to achieve encryption in XI
Encryption in XI
XI Encryption
Thanks
Maybe you are looking for
-
Is it possible to use both inputs of my AudioBox at the same time?
I was having issues last night, and I wanted to poll the community before I declared my device deffective. I have an AudioBox- USB and managed to hook it up to GB. I tried both guitar and a microphone in Input 1 and they both worked. I decided to t
-
Should i send iphone back?
i have about 3 stuck/dead pixels on my screen none of them are in the middle they are all around the side. Im getting a empty box to ship mine back in should i take the chances in getting a refurbished one that could be worst then the one i have or k
-
Integrate Oracle EBS R12 with third party Fax
Hi, We are trying to integrate Oracle EBS R12 with third party Fax. Can anyone share any documents stating the high level solution approach for this kind of integrations? Please send me any docs on --> [email protected] Thanks Suman
-
New Repository variable failing with 'Unresolved Identifier' error
Hi, I created a new repository variable and when used in the Segments/Reports it is failing with 'Unresolved Identifier' error. This is happening intermittently and sometimes it is getting the results as expected, Can you please let me know where I a
-
Syslib.filesystem.errorSettingTimeStamp when installing Developer Studio
SAPinst is getting started. Please be patient ... starting gui server process: sapinstport: 21200 guiport : 21212 guistart : true command : "C:\Archivos de programa\Java\j2re1.4.2_09/bin\javaw.exe" -cp "C:/DOCUME1/raul/CONFIG1/Temp/sa