I have just installed Acrobat 9 @ version 9.0.0 on my Windows laptop. I want to perform the updates to 9.5.5, but Adobe does not provide active links. Any help?

I just got off of "chat" with someone with a very long and unpronounceable name, and he told me that the download links I have found for the various update for Acrobat 9 are no longer active. I already knew that... My question is: where can I get them, then? The files existed at one time, and they must be somewhere... Any help?

Unfortunately, it worked very easily for me - so I have no troubleshooting suggestions. I can, however, post in more detail what I found and what I did...
When I followed the link above, I found a listing of all versions of Adobe revs from 3.x thru 11.x - I clicked on 9.x. In there was listing showing the various 9.x revs: 9.0, 9.1, 9.1.1, 9.1.2, etc. Inside each of these, the next page just shows a "misc" folder. After clicking on that, you finally get to the .msp file that you are looking for. In my case, when I clicked on a .msp file to download it my computer asked me if I was really, really sure because these kinds of files can harm my computer. I said OK, and never encountered any problems.
It is important that you install the files in the correct order, and skip the right ones. Also, some of the folders contain more than one .msp file - so it is important that you choose the right one... I found this list and followed it:
AcroProStdUpd910_T1T2_incr.msp
AcrobatUpd911_all_incr.msp
AcrobatUpd912_all_incr.msp
AcrobatUpd913_all_incr.msp
AcrobatUpd920_all_incr.msp
AcrobatUpd930_all_incr.msp
AcrobatUpd932_all_incr.msp
AcrobatUpd933_all_incr.msp
AcrobatUpd940_all_incr.msp
AcrobatUpd942_all_incr.msp
AcrobatUpd945_all_incr.msp
AcrobatUpd946_all_incr.msp
AcrobatUpd950_all_incr.msp
AcrobatUpd951_all_incr.msp
AcrobatUpd952_all_incr.msp
AcrobatUpd953_all_incr.msp
AcrobatUpd955_all_incr.msp
Most of these require a restart of the computer, which I immediately did. At some point (I wasn't paying attention, since I didn't expect it), Adobe Updater took over after a restart and did the rest of the upgrade in one fell swoop. (I think it was around 9.4.2 or so...)
Hope that helps!

Similar Messages

MacBook Pro will not start up, get start up chime but screen does not light up. Any help?

Upon start up I hear optical drive checked, then get a start up chime but the screen does not light up. I have shut down by holding down power butto for 10 seconds also pulled battery and A/C power.

I had this same issue but after a new hard drive/ram install.
What solved the issue - and I hope this helps someone else who has the same problem:
1). Install new hard drive (with or without osx pre installed) or leave old one in in your case.
2). Remove all ram
3). Power on and wait 1 minute
4). Hold power button until it turns off
5). Install ram
6). Power back on
7). BOOM! It works again.

HT4858 I cannot see the "Photos" icon on my PC's icloud, so I cannot upload any photos. I can see the "photos" icon in my ipad, but it does not show on my PC, Help!

Hi,
I'm trying to upload photos from a USB into icloud so I can see them in my ipad, the problem is, I cannot see the "photos" icon on my icloud account in my PC, so I cannot upload anything. Please help!

To add photos to photo stream on your PC you first you have to set up iCloud on your computer and turn on my photo stream, as explained here: http://www.apple.com/icloud/setup/pc.html. Then you can add photos from your computer to photo stream as explained here: http://support.apple.com/kb/PH2606.

TS2565 I have just installed logic pro Version 9.1.1 to my new mac book , purchased in 2012 December. I am now being told my version of logic is not compatible with my version of OS X. Help!!!

I have just installed logic pro Version 9.1.1 to my new mac book , purchased in 2012 December. I am now being told my version of logic is not compatible with my version of OS X. Help!!! What can I do. I tried upgrding the logic pro software but this didn't help. It still won't open.
Many thanks

How did you install Logic onto your new Mac Book?
From the App store or from the DVD boxed set?
If it was downloaded from the App store then it should already be v9.1.8... and if it isn't you need to call Apple to help you sort this out.
If it was originally from the DVD boxed set then you must update using software updates....
If software updates cannot find Logic to update it then you either have...
Renamed the Logic Pro app in which case rename it back to Logic Pro
or
The Logic Pro App is not in the applications folder which is where it needs to be to be updated... so move it back there.

I have an ipod 2 just bought an ipod air and would like to transfer everything over from ipod 2. i backed up the 2 in itunes and when i connect the air it does not even show up. any help would be greatly appreciated.

I have an ipod 2 just bought an ipod air and would like to transfer everything over from ipod 2. i backed up the 2 in itunes and when i connect the air it does not even show up. any help would be greatly appreciated.

sorry not ipod 2 but an ipad 2

My iTunes, on my computer is not syncing anything at all. We have tried re-downloading it but it does not work. Someone please help me?

My iTunes, on my computer is not syncing anything at all. We have tried re-downloading it but it does not work. Someone please help me?

Here:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

I have a problem to install may apps. I have started the program to download my apps but it does not happend anything. What is the problem

I have a problem to install may apps. I have started the program to download my apps but it does not happend anything. What is the problem?

D117 is the behavior describing similar to the screen shot in App doesn’t open | Progress wheel spins continually? If so then please utilize the solutions within the document to resolve the current error.

I got problem on installing iTunes. When I clicked iTunes out, two windows popped out. One said the procedure entry point CFAttributed String Create Mutable could not be located in the dynamic link library Core Foundation.dll.

I got problem on installing iTunes. When I clicked iTunes out, two windows popped out. One said the procedure entry point CFAttributed String Create Mutable could not be located in the dynamic link library Core Foundation.dll. and one just said *Itunes was not installed correctly. Please re install I Tunes Error 7 (windows error 127) . I've tried uninstalling and reinstalling it. But either way cant work. I really need some of your help! PLS HELP ME!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The error shares a similar pattern to that in the third box, so a similar approach should work. Look for CoreFoundation.dll in C:\Program Files (x86)\Common Files\Apple\Apple Application Support, delete it, then repair Apple Application Support.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

I installed to Java 7 Update 13 64 bit today but firefox does not recognize

I installed to Java 7 Update 13 64 bit today but firefox does not recognize it. I have removed all older versions of Java from my Windows 7 64 bit Laptop.

Install the 32bit version. FF is a 32bit application even on a 64bit platform.

TS2986 I installed Snow Leopard, upgraded it to OS X 10.6.8, paid for and spent the hours necessary to download Lion, but Lion will not install. Even though it says the requirements are 10.6.6 or greater, when I try to install, it says I need 10.7.

I installed Snow Leopard, upgraded it to OS X 10.6.8, paid for and spent the hours necessary to download Lion, but Lion will not install. Even though it says the requirements are 10.6.6 or greater, when I try to install, I get a message saying I need 10.7. to install Lion. What should I do?

Hi..
Make sure your Mac meets Lion's requirements.
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OSX v10.6.6 or later (V10.6.8 recommended)
7GB of available spare
From here > Apple - OS X Lion - Technical specifications
If your Mac meets the requirements, installing the Mac OS X 10.6.8 Update Combo reinstalls the App Store for you which may help.
Restart your Mac after instaling the combo installed. It's ok to do this even though you are already running v10.6.8.
If you have anti virus software installed, you may need to disable that in order to install Lion.

I bought and legally own PS CS3. Installed on a desktop and the machine died completely. Downloaded a trial of CS3 from Adobe site. Went to activate and said too many activations. Activate over the phone. EXCEPT Adobe does not handle activation issues ove

I bought and legally own PS CS3. Installed on a desktop and the machine died completely. Downloaded a trial of CS3 from Adobe site. Went to activate and said too many activations. Activate over the phone. EXCEPT Adobe does not handle activation issues over the phone. Adobe doesn't care about their older products - they don't care that I spent hundreds of dollars for CS3. This is truly disgusting corporate behavior. Is there anything I can do? We aren't all rich photographers. I paid a great deal of money for this product. Is it now useless?Thank you,
James Scott

HI James please contact the Adobe Chat Team for activation issue
kindly do the mentioned steps as follow in order to get hold of chat rep of adobe
Go to www.adobe.com/getsupport
select the product as adobe creative suite - then select the issue as adobe id and sign in - and then click on still need help contact us then you will be able to find chat option and they will help you with the chat issue

Hi! I sold my Iphone on ebay. The seller wants to connect the Iphone with his Apple ID, but it did not work because it says that the Iphone is already connected with another Apple ID. How can I get rid of this old connection? What do I have to do?

Hi! I sold my Iphone on ebay. The seller wants to connect the Iphone with his Apple ID, but it did not work because it says that the Iphone is already connected with another Apple ID. How can I get rid of this old connection? What do I have to do?

What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT5661
MaggySimpson wrote:
Hi! I sold my Iphone on ebay.
Follow the instructions to remove a device you no longer have.
From here > http://support.apple.com/kb/PH13695?viewlocale=en_US

Why does Adobe email me to say I have been removed from my CC membership (because licence was not renewed) BUT Adobe does not have the common sense to tell me my membership is DUE for renewal – so I could have renewed it – BEFORE I was cancelled.

Why does Adobe email me to say I have been removed from my CC membership (because licence was not renewed) BUT Adobe does not have the common sense to tell me my membership is DUE for renewal – so I could have renewed it – BEFORE I was cancelled.

Sign in, activation, or connection errors | CS5.5 and later
For anything else contact support by web chat.
Mylenium

HT3180 In the middle of the updating, iTV was unplugged. Now it does not work at all. Do you have experience, what to do now?

In the middle of the updating, iTV was unplugged. Now it does not work at all. Do you have experience, what to do now?

Ouch. I am afriad the news is not good. If there is no longer a working firmware instance on ATV there is nothing you can do. That's why it has that message about not unplugging it during the update.
Nothing happens when you plug it in?

Have Adobe's Digital Edition, now I wanted per bookcase the books in a list printing, but printing can not activate. I cannot get it working to someway to print lists. Please tell me what the cause is that this fails or what should I change to get the lis

have Adobe's Digital Edition, now I wanted per bookcase the books in a list printing, but printing can not activate. I cannot get it working to someway to print lists. Please tell me what the cause is that this fails or what should I change to get the lists be printed

Hello, Edward and thank you for your note.
I read through the thread you mentioned and it seems that people are having a lot of problems with the iCloud clients, so we're not alone, but the unique issue in my case is the failing email address vs. the working perfectly email address.
After reading your message tonight, I tried my setup again with the preferred Apple ID (the one without the "." between the names), and for the first time ever, IT WORKS. Mail app configured the servers both send and receive as p01-smtp.mail.me.com and p01-imap.mail.me.com. For the first time, I'm able to send and receive into the Mail app, create mailboxes, move messages into and out of mailboxes, keep Sent messages, etc.
I had a 50-minute support chat with MobileMe support via ExpressLane on Monday afternoon. They couldn't resolve my issue but passed me on to escalation. I was told to expect to get an email from advanced support by this afternoon, but none has arrived. However, so far tonight -- and I will check again tomorrow several times before declaring victory -- it looks like something has been fixed on the Apple end to make things work.
I will report back after I do some additional testing tomorrow to make sure the fix is real and is solid...and before I let my friend, the new Mac user, know the good news.
Regards,
Mike

I have just installed Acrobat 9 @ version 9.0.0 on my Windows laptop. I want to perform the updates to 9.5.5, but Adobe does not provide active links. Any help?

Similar Messages

Maybe you are looking for