Status page in X3000 no longer showing any data.

Using the latest 1.0.05 firmware on X3000
Status page perpetually shows "Connecting" even though I'm connected.
It no longer shows data such as the Internet IP address, Gateway etc.
Only DNS IP addresses are shown.

Hi,
Try to turn off your X3000 for around 60secs then check again. If it's doing the same issue after doing a powercycle, you may have to perform a hard reset then reconfigure your router.
If everyone needs to believe in something, I believe I'll have another beer..

Similar Messages

Order status no longer shows any items

The order status area of my account no longer shows any items even going back 18 months.
I've placed about 6 orders in that time frame including one last week. I followed the link to Pre-sign for the shipment but the order never appears, even after 5 days.

I'm having the same problem. There was a page where one could go that had a complete listing of products purchased, including software downloads. I can't find it anywhere and it's really annoying. I own three Macs (two Macbooks and a MBP) and each time I need help I have to dig around for the serial number, etc. Plus the one machine that the Expert system shows as mine, a G4, I sold years ago. What's the big deal about maintaining customer profiles? Everyone else does it. Is there a new URL or something that no one thought to tell us customers of 30 years-standing about?

Just Downloaded current version of iTunes, no longer shows any duplicates and has doubled up on nearly every song in the library, 1500 odd! Also don't want or understand i Cloud, how do I get rid of it?

I have Just downloaded the latest update to iTunes 11, it no longer shows any duplicates, and there are many, over 1500 songs. Also what is this iCloud? I neither want it, use it or need it, so how do I get rid of it? I have enough trouble merely getting in contact with iTunes, you don't make too many allowances for those of us who are not really computer savvy. Maybe I can dump the lot and revert to a friendlier (for me) version?

Sorry but I know of no way of not backing up for a PC.

Sharepoint web analytics does not show any data

Hello,
We installed Sharepoint Web Analytics some days ago (separated application pool).
Installation completed successfully.
Search works fine and returns expected results.
But reports still don't show any data :
Data Last Updated: 15.08.2014 02:00:16 There is no data available for this report. Here are some possible reasons: (1) Web Analytics has not been enabled long enough to generate data; (2)
There is insufficient data to generate this report; (3) Data logging required for this report might not be enabled; (4) Data aggregation might not be enabled at the level required for this report.
What I tried :
connect to website using different users (admin user included)
checked that needed services on server are started (especially analytics services)
restart services Web Analytics Data Processing Service and
Web Analytics Web Service
checked that all services applications are started (WSS_UsageApplication status was
stopped so I started it using Sharepoint 2010 Management Shell)
checked service application associations (especially if Analytics Service Application Proxy is checked)
manual execution of jobs (Web Analytics Trigger Workflows Timer Job, Microsoft SharePoint Foundation Usage Data Import, Microsoft SharePoint Foundation Usage Data Processing)
manual start of incremental crawling
restart IIS
checked scope of data logging (especially if Enable usage data collection and
Enable health data collection are checked)
checked that the .usage file are generated correctly on the disk
checked in the Logging database (WSS_UsageApplication) that the
RequestUsage view contains data collected from the .usage files
checked that data is successfully extracted from the logging database into the staging database (LastLoggingExtractionTime)
checked that data was successfully copied from the staging database to the reporting database (LastDataCopyTime)
checked on the website side that Advanced Web Analytics feature is
Active
recreate web analytics application
checked for any message in ULS logs that could help... I only noticed that error :
The SharePoint Health Analyzer detected an error. Drives are running out of free space. Available drive space is less than twice the value of physical memory. Can it cause the problem ?
All appears to work fine but I can't see any data in the reports.
The thing is that Inventory data is collected successfully and I can see the related reports. Traffic and Search data are still empty.
Anything else I can try ?
Thanks.

Yes I have granted application pool identity full control on the Web Analytics Service Application.
I also checked that Sharepoint 2010 timer service is started.
I can't see anything in the logs that could help, when accessing the reports. The only thing I noticed is this kind of log which occurs
regularly and seems to be an exception :
Enumerating all sites in SPWebApplication Name=SharePoint - 80.
Site Enumeration Stack:
at Microsoft.SharePoint.Administration.SPSiteCollection.get_Count()
at Microsoft.SharePoint.Taxonomy.UpdateHiddenListJobDefinition.Execute(Guid targetInstanceId)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
Maybe it can be the cause ?
I have also cleaned the drive where .usage file are generated so the error "Drives are running out of free space. Available drive space is less than twice the value of physical memory." does not appear anymore.

Search Item drop-down does not show any data for Advanced Search.

Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, Suresh

Hi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu

SAP Standard Side Panels don't show any data?

Hiya,
I'm using NWBC 4 (patch 12) on SAP 7.31 (Ehp 6, SP10) and I can't get any of the SAP delivered Side panels to show any data.
This is typical of what I see, the side panel appears but all the data fields are empty:
The charts don't work either(?) and show nothing...
The only part of a side panel that I managed to get to works was in transaction VA03 and it was the chip to show 'company code' data - but that's not going to impress the business when I demonstrate this functionality to show them how great NWBC with side panels is...
Is there something obvious that I'm doing wrong do you think or has anyone else encountered this kind of problem?
Thanks!

Robert
My 2 cents ...Either your basis team did not activate the parameter necessary for Side Panel or you have NOT perform the necessary Tagging (aka Wiring).
For the former (parameter), check the parameters setup as explain in the help file below.
http://help.sap.com/saphelp_nw73ehp1/helpdata/en/4c/5bdb8497817511e10000000a42189b/content.htm?frameset=/en/4c/5bdae497817511e10000000a42189b/frameset.htm
If this the is later (i.e. Tagging\Wiring)... That meant that the info from your SAPGUI main screen, has NOT been setup to pass the info to your side panel chip. Some of the standard SAP delivered Side Panel CHIP does requires you to perform your own tagging; and there's a security requirements. So before you start this ... Make sure that you have confirm the parameter had been setup correctly (section above); and you have as much of a security rights as possible.
Using Pages in the NWBC Side Panel - Creating Mashups with the Page Builder - SAP Library
HTH ...

Safari cannot open the page because it could not load any data

I had a odd thing happen with Safari today I get a "Safari cannot open the page because it could not load any data" msg when going to a saved site with a book mark but I can get the page to load by going to google. It dosn't happen for the same site every time Mosty Fanfiction.net. Happens on Nework and on cellular. Sites work on my Ipad but not my Iphone 6

Thanks a lot for the tip! I wrote to the NYTimes webmaster but did not get a reply. However, the next day my problem was solved and I could access all content as I did previously. Either a coincidence or...? I'll take it either way and thanks again!

Team calendar My trainings not showing any DATA on Production Server

Dear ALL,
We are facing very critical issue on Production Server.
We have two Id's for which Team calendar, My trainings is not showing any DATA .
We observed that this is happening to both the users who had MSS role previously..
now for your information we have check the following things already .
1. RFC PT_ARQ_TEAMCALE_GET is showing DATA correctly .
2. The authorization. Is correct..
3. We got help from SAP..But not solved problem.
Here we copied same data in the Quality system and the Team calendar, My trainings working fine ..
I donu2019t know why Team calendar, My trainings is not showing any data in the Production system
Let me know ASAP.

Hi,
All r correct in both system .............even following things i have checked .................which i got from reply from U.
01.07.2009 - 11:29:52 UK - Reply by SAP
Hello Pinki
You need to check the settings in your different systems
the #group of organizational views# MSS_LTV_EE is maintained
for the Team Calendar and MSS_LEA_EE for the request mode.
Check the IMG step
Integration with Other mySAP.com Components ->
Business Packages/Functional Packages -> Object and Data Provider
-> Organizational Structure Views -> Group Organizational Structure vieMSS_LTV_EE (Team: Employee selection): the two organizational
views MSS_LTV_EE_ALL and MSS_LTV_EE_DIR are assigned.
MSS_LEA_EE (Leave Request: Employee Selection) the two
organizational views MSS_LEA_EE_ALL and MSS_LEA_EE_DIR are assigned
These organizational views are defined in IMG step #
#define Organizational Structure views#:
They have the following Object selections:
MSS_LTV_EE_ALL: MSS_LTV_EE_ALL (All Employees)
MSS_LTV_EE_DIR: MSS_LTV_EE_DIR (Team: Direct Reports)
MSS_LEA_EE_ALL: MSS_LEA_EE_ALL (All Employees)
MSS_LEA_EE_DIR: MSS_LEA_EE_DIR (Absence: Directly Subordinate Employees)Then you have to check the IMG step # Object
Also check these
Please use the evaluation path "ORGASS".
To change the evaluation path kindly go to the view V_TWPC_V , look for
the ESSDIR view and double click on the ESSDIR.
Please check the above customisation,
Tthe evaluation path SAP_MANG is used to determine
the root objects. "Eval.Path for Root Objects" on the detail
screen in the view V_TWPC_V "View Definition" for further information onthis topic).
Also check the customisation using
report RHSTRU00
In view V_TWPC_VG, the view group PTESS of view ESSDIR with position
01 should exist. Please correct it as well
and ensure that
In the View Cluster(T-Code SM34) VC_TWPC_ORGVWGRP there should be
a record for the group 'ATTEND'.
Hope this will help you.
Best Regards,
Siddharth Rajora
HCM
SAP LABS India

Popularity Trends not showing any data

Hi,
we are using SP 2013 RTM version and it is not showing any data in the usage statistics when we run the popularity trends reports. Is this a bug with SP 2013 RTM version? or am i missing something?
Thanks
techie

Hi,
Per my understanding, Popularity Trends report showing no data in your environment.
For narrowing down the issue, I suggest you check whether the two timer jobs “Microsoft SharePoint Foundation Usage Data Import” and “Microsoft SharePoint Foundation Usage Data
Processing” which are handling the usage report runs without issue.
More information about how to deal with this issue for your reference:
http://blog.fpweb.net/troubleshooting-sharepoint-2013-web-analytics/#.VQKMGHkfqwU
http://snowburnt.blogspot.com/2014/12/how-to-troubleshoot-sharepoint-usage.html
http://geekswithblogs.net/bjackett/archive/2013/08/26/powershell-script-to-workaround-no-data-in-sharepoint-2013-usage.aspx
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

LISTCUBE not showing any data with SAPKW70110

Hi all
we just upgraded our system from SAPKW70107 to SAPKW70110 and now do have the following problem:
All InfoCubes containing non-cumulatives don't show any data anymore in transaction LISTCUBE.
All the cubes did work fine before.
What is curious is that some queries based on these cubes are working and at least showing some data (but not the correct data).
We couldn't find anything in the notes so far..
Anything we could do?
Regards
bivision

Hi,
You can use improvised listcube to display data. It can be created by taking help from the following link ;-
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70e092a3-9d8a-2d10-6ea5-8846989ad405?QuickLink=index&overridelayout=true
However you should raise this issue to SAP .
Navesh
Edited by: navsamol on Oct 11, 2011 8:17 PM

Error safari could not open page because it could not load any data

safari could not open page because it could not load any data???? Whats the problem. I am trying to get on my works benefits page to change 401k investments.

Since the latest 'update' on Dec 13th, I can't access Safari at all. A page of gobbledegook comes up.

Tables & Index not showing any data

Hi All,
I have done the db2 upgradtion from 9.1 to 9.7 with fix pack 4.I am unable to see table size after upgrade. I have checked all the sap collector job running fine.
db02>history>tables& index not showing any data
Regrads,
Mnai

Please make sure RSCOL00 running or execute it manually.
Did you try to run the stats in DB13 ?

My Apple TV is no longer showing any of my purchased movies or TV shows

My Apple TV is not showing any of the movies or TV shows that I purchased. They used to be there under the "Purchased" section of movies and TV shows, but now the list is empty. How can I get them to show up again?

Hey taraannie,
You may want to make sure that your device is still associated with your Apple ID:
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/HT4627
You may want to also sign out of your Apple ID in the settings of your Apple TV, then sign back in to make sure that you are connected with your Apple ID. Take care, and thanks for visiting the Apple Support Communities.
-Braden

11g Cube not showing any data with no Rejected records

Hi David ,
Strangely one of my 11g Cube is not showing data from today as it is showing all records rejected . However when I lookup Rejected records table I didn't find any records .Not sure what is happening . When I want to peep out the AWM queries from CUBE_BUILD_LOG and ran to the database in the AWM schema the records are retruning perfectly fine . I wonder same query is firing during Cube load but without any data ? My Cube build script has only LOAD and Aggregate .
after maintain My dimensions data are looking fine but no data populated after Cube maintenance . My MV switch off across all dimensions and cubes .
I navigate to CUBE_OPERATION_LOG and not able to comprehend about the content.
Any advice ?
Thanks and Regards,
DxP

Hi David ,
To be very frank today is very bad day ... Please see below my observation:
Executed below to make sure that no key values in dimension is missing but present in fact . All below query returns no row.
select distinct owner_postn_wid from w_synm_rx_t_f
minus
select distinct row_wid from postn_dh
select distinct payer_type_Wid from w_synm_rx_t_f
minus
select distinct row_wid from wc_ins_plan_dh
select distinct market_wid from w_synm_rx_t_f
minus
select distinct row_wid from w_product_dh
select distinct period_day_wid from w_synm_rx_t_f
minus
select distinct row_wid from w_daytime_D
select distinct contact_wid from w_synm_rx_t_f
intersect
select distinct row_wid from w_person_d
select distinct X_TERR_TYPE_WID from w_synm_rx_t_f
minus
select distinct row_wid from W_LOV_D
============================
Below returns count of 0 rows : ensure no NULL present
select count(1) from w_synm_rx_t_f where contact_wid is null;
select count(1) from w_synm_rx_t_f where owner_postn_wid is null;
select count(1) from w_synm_rx_t_f where payer_type_Wid is null;
select count(1) from w_synm_rx_t_f where period_day_wid is null;
select count(1) from w_synm_rx_t_f where X_TERR_TYPE_WID is null;
select count(1) from w_synm_rx_t_f where market_wid is null;
+++++++++++++++++++++++++++++++++
Cube Build Log has below entry:
796     0     STARTED     CLEAR VALUES     MKT_SLS_CUBE     CUBE          NNOLAP     NN_OLAP_POC     P14:JAN2010          17-AUG-11 07.12.08.267000000 PM +05:30          JAVA     1          C     47141     67     0     1
796     0     COMPLETED     CLEAR VALUES     MKT_SLS_CUBE     CUBE          NNOLAP     NN_OLAP_POC     P14:JAN2010          17-AUG-11 07.12.08.267000000 PM +05:30          JAVA     1          C     47141     67     0     2
796     0     STARTED     LOAD     MKT_SLS_CUBE     CUBE          NNOLAP     NN_OLAP_POC     P14:JAN2010          17-AUG-11 07.12.08.283000000 PM +05:30          JAVA     1          C     47142     68     0     1
796     0     SQL     LOAD     MKT_SLS_CUBE     CUBE     "<SQL>
<![CDATA[
SELECT /*+ bypass_recursive_check cursor_sharing_exact no_expand no_rewrite */
T16_ROW_WID ALIAS_127,
T13_ROW_WID ALIAS_128,
T10_ROW_WID ALIAS_129,
T7_ROW_WID ALIAS_130,
T4_ROW_WID ALIAS_131,
T1_ROW_WID ALIAS_132,
SUM(T20_MKT_TRX) ALIAS_133,
SUM(T20_MKT_NRX) ALIAS_134
FROM
SELECT /*+ no_rewrite */
T1."CONTACT_WID" T20_CONTACT_WID,
T1."MARKET_WID" T20_MARKET_WID,
T1."OWNER_POSTN_WID" T20_OWNER_POSTN_WID,
T1."PAYER_TYPE_WID" T20_PAYER_TYPE_WID,
T1."PERIOD_DAY_WID" T20_PERIOD_DAY_WID,
T1."MKT_NRX" T20_MKT_NRX,
T1."MKT_TRX" T20_MKT_TRX,
T1."X_TERR_TYPE_WID" T20_X_TERR_TYPE_WID
FROM
NN_OLAP_POC."W_SYNM_RX_T_F" T1 )
T20,
SELECT /*+ no_rewrite */
T1."ROW_WID" T16_ROW_WID
FROM
NN_OLAP_POC."W_DAYTIME_D" T1 )
T16,
SELECT /*+ no_rewrite */
T1."ROW_WID" T13_ROW_WID
FROM
NN_OLAP_POC."W_PERSON_D" T1 )
T13,
SELECT /*+ no_rewrite */
T1."ROW_WID" T10_ROW_WID
FROM
NN_OLAP_POC."WC_INS_PLAN_DH" T1 )
T10,
SELECT /*+ no_rewrite */
T1."ROW_WID" T7_ROW_WID
FROM
NN_OLAP_POC."W_LOV_D" T1 )
T7,
SELECT /*+ no_rewrite */
T1."ROW_WID" T4_ROW_WID
FROM
NN_OLAP_POC."POSTN_DH" T1 )
T4,
SELECT /*+ no_rewrite */
T1."ROW_WID" T1_ROW_WID
FROM
NN_OLAP_POC."W_PRODUCT_DH" T1 )
T1
WHERE
((T20_PERIOD_DAY_WID = T16_ROW_WID)
AND (T16_ROW_WID = 20100101)
AND (T20_CONTACT_WID = T13_ROW_WID)
AND (T20_PAYER_TYPE_WID = T10_ROW_WID)
AND (T7_ROW_WID = T20_X_TERR_TYPE_WID)
AND (T20_OWNER_POSTN_WID = T4_ROW_WID)
AND (T20_MARKET_WID = T1_ROW_WID)
AND ((T20_PERIOD_DAY_WID) IN ((20100107.000000) , (20100106.000000) , (20100128.000000) , (20100124.000000) , (20100121.000000) , (20100118.000000) , (20100115.000000) , (20100109.000000) , (20100125.000000) , (20100114.000000) , (20100111.000000) , (20100110.000000) , (20100104.000000) , (20100101.000000) , (20100129.000000) , (20100123.000000) , (20100117.000000) , (20100113.000000) , (20100108.000000) , (20100131.000000) , (20100120.000000) , (20100116.000000) , (20100119.000000) , (20100105.000000) , (20100102.000000) ,
(20100130.000000) , (20100127.000000) , (20100122.000000) , (20100112.000000) , (20100103.000000) , (20100126.000000) ) ) )
GROUP BY
(T1_ROW_WID, T4_ROW_WID, T7_ROW_WID, T10_ROW_WID, T13_ROW_WID, T16_ROW_WID)
ORDER BY
T1_ROW_WID ASC NULLS LAST ,
T4_ROW_WID ASC NULLS LAST ,
T7_ROW_WID ASC NULLS LAST ,
T10_ROW_WID ASC NULLS LAST ,
T13_ROW_WID ASC NULLS LAST ,
T16_ROW_WID ASC NULLS LAST ]]>/>
</SQL>"     NNOLAP     NN_OLAP_POC     P14:JAN2010          17-AUG-11 07.12.08.627000000 PM +05:30          JAVA     1     MAP1     C     47142     68     0     2
796     0     COMPLETED     LOAD     MKT_SLS_CUBE     CUBE     "<CubeLoad
LOADED="0"
REJECTED="4148617"/>"     NNOLAP     NN_OLAP_POC     P14:JAN2010          17-AUG-11 07.12.40.486000000 PM +05:30          JAVA     1          C     47142     68     0     3
796     0     STARTED     UPDATE     MKT_SLS_CUBE     CUBE          NNOLAP     NN_OLAP_POC     P14:JAN2010          17-AUG-11 07.12.40.501000000 PM +05:30          JAVA     1          C     47143     69     0     1
796     0     COMPLETED     UPDATE     MKT_SLS_CUBE     CUBE          NNOLAP     NN_OLAP_POC     P14:JAN2010          17-AUG-11 07.12.40.548000000 PM +05:30          JAVA     1          C     47143     69     0     2
+++++++++++++++++
You can observer clear rejection of 4 million rows ... Ran the above query which returns my data successfully.
Look out to CUBE_REJECTED records take the sample record and put into the above query it is returning the data fine with my measures and dimension WID's :(PLEASE SEE BELOW THE FILTERS on ROW_WID)
=========================
SELECT /*+ bypass_recursive_check cursor_sharing_exact no_expand no_rewrite */
T16_ROW_WID ALIAS_127,
T13_ROW_WID ALIAS_128,
T10_ROW_WID ALIAS_129,
T7_ROW_WID ALIAS_130,
T4_ROW_WID ALIAS_131,
T1_ROW_WID ALIAS_132,
SUM(T20_MKT_TRX) ALIAS_133,
SUM(T20_MKT_NRX) ALIAS_134
FROM
SELECT /*+ no_rewrite */
T1."CONTACT_WID" T20_CONTACT_WID,
T1."MARKET_WID" T20_MARKET_WID,
T1."OWNER_POSTN_WID" T20_OWNER_POSTN_WID,
T1."PAYER_TYPE_WID" T20_PAYER_TYPE_WID,
T1."PERIOD_DAY_WID" T20_PERIOD_DAY_WID,
T1."MKT_NRX" T20_MKT_NRX,
T1."MKT_TRX" T20_MKT_TRX,
T1."X_TERR_TYPE_WID" T20_X_TERR_TYPE_WID
FROM
NN_OLAP_POC."W_SYNM_RX_T_F" T1 )
T20,
SELECT /*+ no_rewrite */
T1."ROW_WID" T16_ROW_WID
FROM
NN_OLAP_POC."W_DAYTIME_D" T1 )
T16,
SELECT /*+ no_rewrite */
T1."ROW_WID" T13_ROW_WID
FROM
NN_OLAP_POC."W_PERSON_D" T1 )
T13,
SELECT /*+ no_rewrite */
T1."ROW_WID" T10_ROW_WID
FROM
NN_OLAP_POC."WC_INS_PLAN_DH" T1 )
T10,
SELECT /*+ no_rewrite */
T1."ROW_WID" T7_ROW_WID
FROM
NN_OLAP_POC."W_LOV_D" T1 )
T7,
SELECT /*+ no_rewrite */
T1."ROW_WID" T4_ROW_WID
FROM
NN_OLAP_POC."POSTN_DH" T1 )
T4,
SELECT /*+ no_rewrite */
T1."ROW_WID" T1_ROW_WID
FROM
NN_OLAP_POC."W_PRODUCT_DH" T1 )
T1
WHERE
((T20_PERIOD_DAY_WID = T16_ROW_WID)
AND (T16_ROW_WID = 20100101)
AND (T20_CONTACT_WID = T13_ROW_WID)
AND (T20_PAYER_TYPE_WID = T10_ROW_WID)
AND (T7_ROW_WID = T20_X_TERR_TYPE_WID)
AND (T20_OWNER_POSTN_WID = T4_ROW_WID)
AND (T20_MARKET_WID = T1_ROW_WID)
AND T13_ROW_WID = 255811
AND T7_ROW_WID = 122
AND T4_ROW_WID =3
AND T1_ROW_WID=230
AND T10_ROW_WID = 26
AND ((T20_PERIOD_DAY_WID) IN ((20100107.000000) , (20100106.000000) , (20100128.000000) , (20100124.000000) , (20100121.000000) , (20100118.000000) , (20100115.000000) , (20100109.000000) , (20100125.000000) , (20100114.000000) , (20100111.000000) , (20100110.000000) , (20100104.000000) , (20100101.000000) , (20100129.000000) , (20100123.000000) , (20100117.000000) , (20100113.000000) , (20100108.000000) , (20100131.000000) , (20100120.000000) , (20100116.000000) , (20100119.000000) , (20100105.000000) , (20100102.000000) ,
(20100130.000000) , (20100127.000000) , (20100122.000000) , (20100112.000000) , (20100103.000000) , (20100126.000000) ) ) )
GROUP BY
(T1_ROW_WID, T4_ROW_WID, T7_ROW_WID, T10_ROW_WID, T13_ROW_WID, T16_ROW_WID)
ORDER BY
T1_ROW_WID ASC NULLS LAST ,
T4_ROW_WID ASC NULLS LAST ,
T7_ROW_WID ASC NULLS LAST ,
T10_ROW_WID ASC NULLS LAST ,
T13_ROW_WID ASC NULLS LAST ,
T16_ROW_WID ASC NULLS LAST
=================================
THE XML export of CUBE as below:
<!DOCTYPE Metadata [
<!ENTITY % BIND_VALUES PUBLIC "OLAP BIND VALUES" "OLAP METADATA">
%BIND_VALUES;
]>
<Metadata
Version="1.2"
MinimumDatabaseVersion="11.2.0.1">
<Cube
ETViewName="MKT_SLS_CUBE_VIEW"
Name="MKT_SLS_CUBE">
<Measure>
<BaseMeasure
SQLDataType="NUMBER"
ETMeasureColumnName="TRX"
Name="TRX">
<Description
Type="LongDescription"
Language="AMERICAN"
Value="TRX">
</Description>
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="TRX">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="TRX">
</Description>
</BaseMeasure>
</Measure>
<Measure>
<BaseMeasure
SQLDataType="NUMBER"
ETMeasureColumnName="NRX"
Name="NRX">
<Description
Type="LongDescription"
Language="AMERICAN"
Value="NRX">
</Description>
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="NRX">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="NRX">
</Description>
</BaseMeasure>
</Measure>
<CubeMap
Name="MAP1"
IsSolved="False"
Query="W_SYNM_RX_T_F"
WhereClause="W_DAYTIME_D.ROW_WID = 20100101">
<MeasureMap
Name="TRX"
Measure="TRX"
Expression="W_SYNM_RX_T_F.MKT_TRX">
</MeasureMap>
<MeasureMap
Name="NRX"
Measure="NRX"
Expression="W_SYNM_RX_T_F.MKT_NRX">
</MeasureMap>
<CubeDimensionalityMap
Name="TIME"
Dimensionality="TIME"
MappedDimension="TIME.CALENDER.MONTHLY"
JoinCondition="W_SYNM_RX_T_F.PERIOD_DAY_WID = W_DAYTIME_D.ROW_WID"
Expression="W_DAYTIME_D.ROW_WID">
</CubeDimensionalityMap>
<CubeDimensionalityMap
Name="CUSTOMER"
Dimensionality="CUSTOMER"
MappedDimension="CUSTOMER.CUSTOMER_HIERARCHY.DETAIL_LEVEL"
JoinCondition="W_SYNM_RX_T_F.CONTACT_WID = W_PERSON_D.ROW_WID"
Expression="W_PERSON_D.ROW_WID">
</CubeDimensionalityMap>
<CubeDimensionalityMap
Name="INS_PLAN_DH"
Dimensionality="INS_PLAN_DH"
MappedDimension="INS_PLAN_DH.INS_PLAN.DETAIL"
JoinCondition="W_SYNM_RX_T_F.PAYER_TYPE_WID = WC_INS_PLAN_DH.ROW_WID"
Expression="WC_INS_PLAN_DH.ROW_WID">
</CubeDimensionalityMap>
<CubeDimensionalityMap
Name="LIST_OF_VALUES"
Dimensionality="LIST_OF_VALUES"
MappedDimension="LIST_OF_VALUES.LOV_HIERARCHY.DETAIL_LEVEL"
JoinCondition="W_LOV_D.ROW_WID = W_SYNM_RX_T_F.X_TERR_TYPE_WID"
Expression="W_LOV_D.ROW_WID">
</CubeDimensionalityMap>
<CubeDimensionalityMap
Name="POSITIONDH"
Dimensionality="POSITIONDH"
MappedDimension="POSITIONDH.POST_HIER.DETAIL"
JoinCondition="W_SYNM_RX_T_F.OWNER_POSTN_WID = POSTN_DH.ROW_WID"
Expression="POSTN_DH.ROW_WID">
</CubeDimensionalityMap>
<CubeDimensionalityMap
Name="PRODH"
Dimensionality="PRODH"
MappedDimension="PRODH.PRODHIER.DETAILLVL"
JoinCondition="W_SYNM_RX_T_F.MARKET_WID = W_PRODUCT_DH.ROW_WID"
Expression="W_PRODUCT_DH.ROW_WID">
</CubeDimensionalityMap>
</CubeMap>
<Organization>
<AWCubeOrganization
MVOption="NONE"
SparseType="COMPRESSED"
MeasureStorage="SHARED"
NullStorage="MV_READY"
CubeStorageType="NUMBER"
PrecomputePercent="35"
PrecomputePercentTop="0"
PartitionLevel="TIME.CALENDER.MONTHLY"
AW="&AW_NAME;">
<SparseDimension
Name="TIME"/>
<SparseDimension
Name="CUSTOMER"/>
<SparseDimension
Name="INS_PLAN_DH"/>
<SparseDimension
Name="LIST_OF_VALUES"/>
<SparseDimension
Name="POSITIONDH"/>
<SparseDimension
Name="PRODH"/>
<DefaultBuild>
<![CDATA[BUILD SPEC LOAD_AND_AGGREGATE
LOAD NO SYNCH,
SOLVE
)]]>
</DefaultBuild>
</AWCubeOrganization>
</Organization>
<Dimensionality
Name="TIME"
ETKeyColumnName="TIME"
Dimension="TIME">
</Dimensionality>
<Dimensionality
Name="CUSTOMER"
ETKeyColumnName="CUSTOMER"
Dimension="CUSTOMER">
</Dimensionality>
<Dimensionality
Name="INS_PLAN_DH"
ETKeyColumnName="INS_PLAN_DH"
Dimension="INS_PLAN_DH">
</Dimensionality>
<Dimensionality
Name="LIST_OF_VALUES"
ETKeyColumnName="LIST_OF_VALUES"
Dimension="LIST_OF_VALUES">
</Dimensionality>
<Dimensionality
Name="POSITIONDH"
ETKeyColumnName="POSITIONDH"
Dimension="POSITIONDH">
</Dimensionality>
<Dimensionality
Name="PRODH"
ETKeyColumnName="PRODH"
Dimension="PRODH">
</Dimensionality>
<Description
Type="LongDescription"
Language="AMERICAN"
Value="MKT SLS CUBE">
</Description>
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="MKT SLS CUBE">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="MKT SLS CUBE">
</Description>
<ConsistentSolve>
<![CDATA[SOLVE
SUM
    MAINTAIN COUNT
     OVER ALL
)]]>
</ConsistentSolve>
</Cube>
</Metadata>
+++++++++++++++++++++++
I dropped the AW and create new from exported XML and maintain all dimensions and then rebuild . Still have the issue :(
Any thing you can hightlight from above ?
Thanks,
DxP
Also I sustpect whethere it is a issue due to below error caused when I click on one of my Position_Hier view from AWM : even if I select that view it is throwing the error in SQL developer after displaying first couple of rows (while page down)
java.sql.SQLException: ORA-33674: Data block size 63 exceeds the maximum size of 60 bytes.
at oracle.olap.awm.util.jdbc.SQLWrapper.execute(Unknown Source)
at oracle.olap.awm.querydialog.PagedQueryDialog$1.construct(Unknown Source)
at oracle.olap.awm.ui.SwingWorker$2.run(Unknown Source)
at java.lang.Thread.run(Thread.java:595)
Edited by: e_**** on Aug 17, 2011 8:41 PM

Load status in PSA "Request not updated to any data target using delta"

Hi,
I need to delete the Unwanted request from PSA with status u201CRequest not updated to any data target using deltau201D
There are lot of requests are there in PSA but some of them loaded with status
u201CRequest updated in Data targetu201D u2013 I donu2019t want delete this requests.
Others u201CRequest not updated to any data target using deltau201D -- need to delete
We are deleting manually every week end.
Is there any program or tables which can delete automatically unwanted u201C Request not updated to any data target using deltau201D requests from PSA.
Thanks for your help in Advance,
Raj.

Hi Rajesh,
You may create a simple process chain, where you could include the variant "Delete PSA Request".At the bottom of this variant maintenace screen you would find options exactly matching your requirements.It's a very simple option and should not take you more than 5 minutes.
Best Regards,
Bansi.

Status page in X3000 no longer showing any data.

Similar Messages

Maybe you are looking for