I have Mac Air Updated to Mavericks, since then unable to listen to UNI podcasts. I have updated to the latest version of iTunes.
Hi All,
I have recently upgraded to Mavericks and since then I am unable to connect to my Uni Podcast, it keeps asking to register my username and password, even when launched from the external website.
I have reinstalled the latest version of iTunes and still same issue.
Any advise would be good thanks.
Thanking you all in advance.
Cheers,
DU696
Follow these instructions to completely remove Apple software
http://support.apple.com/kb/HT1923
Then use free Ccleaner to repeatly repair your registry until it's fixed.
http://www.piriform.com/ccleaner/download/standard
download iTunes again from Apple.
Your content will remain.
Similar Messages
-
Since updating to the latest version of iTunes, I have been unable to sync ANY of my devices (iPod
I recently updated to the latest version of iTunes. Since updating, iTunes does not recognize any of my devices (iPod or iPhone).
When I plug in my iPhone it doesn't even recognize that it is plugged into the computer (although the cord works and the USB port is good).
When I plug in my iPod (on the same cord) an error message pops up in iTunes and immediately kicks/ejects. "An iPod has been detected, but it could not be identified properly..."
Please help!Follow these instructions to completely remove Apple software
http://support.apple.com/kb/HT1923
Then use free Ccleaner to repeatly repair your registry until it's fixed.
http://www.piriform.com/ccleaner/download/standard
download iTunes again from Apple.
Your content will remain. -
My Iphone 4 crahsed a few months ago when I tried to update and i have used Itunes already and it updated to the latest version of itunes but it says there is an erro and cannot be restored, I'm not sure why it is saying that, can I get some help?
Hi Alyssa_fagundes,
Thanks for the question. Based on what you stated, it seems like you need help restoring an iOS device. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Cheers,
Mario -
I have updated to the latest version of iTunes (11.2.2.3). However, when I connect my iPod it shows in My Computer and iTunes opens automatically when the iPod is connected but the device doesn't show in iTunes. Any ideas? I am on Windows 8.1 and my iPod is a Classic
Hi murr18140,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with your iPod classic not being recognized in iTunes for Windows:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363?viewlocale=en_US
I hope this information helps ....
- Judy -
I have the Mac OS 10.9.4 I am unable to read PDF's, so thought I would download the latest version of Adobe Reader. It will not install. Is it comparable with my Mac OS?
More information would be good.
What do you mean by "unable to read PDF's". How are you trying to read them and what exactly happens when you try?
so thought I would download the latest version of Adobe Reader. It will not install.
Again, what exactly is happening?
And yes, the latest version should be compatible with your OS. -
I have updated to the latest version of itunes but now i cannot see what i have on my ipod
i have update to the latest version of itunes but now i cannot see whats on my ipod
Hi murr18140,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with your iPod classic not being recognized in iTunes for Windows:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363?viewlocale=en_US
I hope this information helps ....
- Judy -
I have just installed the latest version of iTunes version 11.1.5.5, now I have no playlists. So I uninstalled and tried again, now I have no songs also! Also my account balance has gone down by approx £5, which incedently happened the last time I installed an update. Please help
See Empty/corrupt iTunes library after upgrade/crash.
tt2 -
Since updating to the latest version of iTunes (11) I cannot find the files that I need to export from apps on my iPhone to my Desktop PC
Follow these instructions to completely remove Apple software
http://support.apple.com/kb/HT1923
Then use free Ccleaner to repeatly repair your registry until it's fixed.
http://www.piriform.com/ccleaner/download/standard
download iTunes again from Apple.
Your content will remain. -
I can't update to the latest version of iTunes - complains that iTunes10.7.dmg is corrupt?
I can't update to the latest version of iTunes - complains that iTunes10.7.dmg is corrupt?
Surely iTunes should be upgraded automatically? It always has in the past.
Typically a computer does not automatically update itself. This would be highly undesirable in my opinion. What if it was it started doing it just as you were going to do a presentation? I have never heard of iTunes automatically updating itself.
Why do I have to download it again?
You can let Software Update do this if you wish.
And why from the Apple website and not the itunes website?
What iTunes web site? The "iTunes website" is the Apple web site.
And if I do, wont I lose all my playlists, the info from my old phone etc.
No, you shouldn't but once a month somebody complains here than an update wiped their iTunes collection. Not sure I believe them since i don't see how it could do it, but you should always back up first.
I have just bought an iphone 5, delivered today, which wont sync with 10.6.3.
Correct. An iPhone 5 requires iTunes 10.7
When I try to upgrade via iTunes, it tells me that I have the latest version.
Maybe it is the latest version your computer can run with the operrating system version you are using.
At this point I am just going to say it is polite to leave this topic to answer the questions of the original poster (OP). You are facing a pretty different set of issues and you should start your own topic where we can focus on your issues and not get it all muddled up with the OP's. -
I just updated to the latest version of iTunes and now it will not sync with my iPhone 5
I just updated to the latest version of iTunes and now it wont detect my iPhone 5 to sync. Can anyone help? I am running on Windows 8.
I have already gone into control panel and repaired the program. Nothing is working!See the tt2 user tips for help:Troubleshooting issues with iTunes for Windows updates
-
I'm using windows 8 on my pc, and i have just downloaded the latest version of itunes, after i upgraded the latest version of itunes, it can't detect my iphone, but my windows/my pc does. Anyone knows how to solve this problem?
Hi jstutsman,
If you are having issues with your iPod nano not being recognized in iTunes after a recent update, you may find the steps and links listed in the following article helpful:
iPod not appearing in iTunes - Apple Support
Regards,
- Brenden -
I just updated to the latest version of itunes, n ow when I plug in my iphone, it says it cannot sync because "apple mobile device service is not started" this never happen before, what do I do??
The Apple Mobile Device Service is a part of sever programs that "help" iTunes on Windows. It may have been disabled in the Microsoft program, msconfig, or using a third party utility, such as CCleaner.
I would suggest trying to find and enable the service. To do so, click on the start button, click "run", and then type "msconfig" look for the iTunes Helper entry and make sure that it's enabled.
Additionally, there may be another service which you will have to enable. You can type something like "service.msc", (I'm not sure exactly) to see the "Services" control panel and look for it there.
If you can't find either, feel free to post here again.
Message was edited by: MoshBerm -
recently updated to the latest version of Itunes (11.1) and when i try to play music or tv shows, the sound lasts only for a second before going completely mute, anyone know how to fix this?
Check this thread out -> iTunes 10.4 & Multimedia Keyboard
It doesn't look like there is a fix yet, but some people in the thread are pointing to this workaround:
pikot wrote:
Following some suggestion i seem to have found a solution for the problem and my play/pause, next and previous buttons work with iTunes 10.4.1
- You need to open a text editor (like notepad) as an administrator.
- Open the SetPoint players.ini file (C:\Program Files\Logitech\SetPointP\players.ini)
- Edit the line under the [Players] section to match the line bellow (bold is the wndClass which is to be changed)
iTunes=wac,iTunes.exe,ITWindow,xxx,xxx,xxx,xxx,xxx,xxx,xxx,0,1,iTunes
- Save the file
- Restart the SetPoint and hopefully play/pause, next and previous buttons should work (at least they work for me) -
i need to update to the latest version of itunes, but need to download some images and video first.....it is telling me that this will all be erased if i update, but it is not letting me do anything else.....what can i do??
You have no choice but to restore the phone.
However, I'm sure you've been smart enough to have backed up your data before starting the most significant update in iOS history,right? -
Once I updated to the latest version of iTunes, I now cannot get all my apps to update. Then syncing up. Poor way of doing business with little help. Need help?????
Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help
Maybe you are looking for
-
Creating view for exchange alerts only
how do I give access to another group to view or modify alerts for the exchange servers alerts? Should this be done on the web view or the scom console?
-
I have an element within OSB that I'm getting a returned value. The element is B_AMT <B_AMT> 1000 </B_AMT> I want to calculate on B_AMT like the following B_AMT / 100 how do calculate in OSB this returned response B_AMT divided by 100? Thanks
-
How do I add vimeo as a favorite to upload to in the sharing groups on the dock? Are my only choices youtube, flicker, picaasa and facebook? I'd rather use vimeo. Thanks.
-
I´ve lost my ipod touch, how can i be sure that my ID and my mail account are sure? What can i do?
Please help me
-
Can you install iLife 09 on two machines? Most software I've bought lets you put a copy on your desktop and one on the laptop. Thanks... Steven