I have used Bootcamp to install Windows 7 on my new Mac OS X Lion. Now when I start my computer it starts directly with Windows. How do I get back to Mac?
I have used Bootcamp to install Windows 7 on my new Mac OS X Lion. Now, when I start my computer it starts directly with Windows. No way to get back to Mac
I have used Bootcamp to install Windows 7 on my new Mac OS X Lion. Now, when I start my computer it starts directly with Windows. No way to get back to Mac
Similar Messages
-
I partitioned a small drive for a windows program, and now the computer only wants to boot to Windows. How do I get back to Mac so I can have a choice of drives?
That doesn't sound good. It sounds like the power outage might have corrupted the partition for OS X. I would suggest booting from the Install DVD that came with your Mac while holding down the C key. Once you have selected the language start up Disk Utility from the pull down menu and repair the disk. Once you have done that then repair permissions also.
Allan -
I have used SAP doc mgmt for years. We copied a client and now when I configure a Class to my DMS DIR and go to CV01n Additional Data NONE of the characteristic entry boxes show up. Additional Data is blank.
It appears there must be some high level setting missing in the client. I have checked all authorizations and cannot find a difference between this client and all of the other clients we have. Only this one client does not show the class characteristics in the Additional Data tab.
Any ideas of why this standard function is not working). It does not matter which DIR I config the 017 class to, nothing shows on Additional Data.Hi,
The issue is resolved. We are working in a sandbox with Class configuration on a DMS issue related to standard class 017. There are no standard settings in SPRO - Cross-Application Components | Maintain Object Types and Class Types | for the object type DRAW that will allow "auto-populating" characteristic values as we do with VC class 300.
For whatever reason DRAW and class 017 are not configured by SAP in the same manner as class 300 for example.
We made a config entry for DRAW Class 017 VBAP. Let's just say the system did not like that.
We are exploring other options. -
i lost my ipod and i remotely locked my ipod on the computer using icloud, but when click on find my ipod it says NO DEVICES, how can i get back to the find my ipod page??? pliz help
The only way you will be able to track that iPod is if it is turned on and connected to a wifi network by the person that has it.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
How do I get back the preview window so that I don't have to click open each message? Thanks in advance! --Cheryl
Hi LeoLady!
Having the preview window up to get a quick and good overview of your mail is very handy and I understand you would like to get that feature back!
Have you tried to close the mail app using cmd+q and opening again? Have you tried taking your mouse the whole way to the right in the mail window and try to "drag" the preview window back out again? -
How do i get back to Mac OS after installing Windows 7
I just installed windows 7 on my macbook pro. i had OS Lion on my mac but I have no idea how to get back to it. If anyone knows how to go back and forth between the two operating systems PLEASE get back to me!
Reboot/restart, and hold down the Option key on your keyboard before the screen goes black. Keep it held down, and you'll see a boot panel giving you the option of choosing Mac or Windows partitions.
Matt -
how do i try and get in my ipod when its saying ipod is disabled
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
After installing the windows 7 64 bit, it will restart automatically with error in blue screen. in this case what should i do? i have using bootcamp 5
if it's restarting directly into an error, you can try troubleshooting (might be painful) or re-install windows with boot camp
-
Hello Everyone,
I have a MacBook older model with me.I am running 10.7.6 on that, I was trying to use BootCamp to install windows on my mac. Since BootCamp can only work on a single Volume, I partitioned my Hard Disk to one volume.
Using BootCamp I installed windows and everything worked fine. After installing windows and testing everything, I switched back to OS X and this time I tried to make another partition on my single portioned Mac volume and named it Backup. That too worked. Now I have three Volumes
1)Development2)Backup3)BootCamp.
Next when I switched to Windows, It should the classic error, No Bootable device found, please insert a Bootable CD and press any key. When I tried to enter my Mac OS X install DVD and by pressing option key, it does not show me the proper Mac OS X development volume. It keeps going back to the No bootable device found message.
Any help will be much appreciated
Regards
Mithunyou can't add a partition in between - you put Windows to a new partition number.
GPT (GUID)
EFI
Mac HFS
Lion Recovery
Windows
And now you have two HFS
One partition and one Windows (plus Lion Recovery).
If you were to have more, it can't be before Windows for one thing. -
using bootcamp, was installing windows xp, at the select ntfs or fat format mistakenly selected "leave the current file system intact." How can that be changed to a correct choice. Mac side opens correctly. Windows shows disk error. and doesn't respond to press any key. When looking in the startup disk section, windows on boot camp can be seen, but not selected. (13"MacBook Pro 10.6.8)
Have a read here http://support.apple.com/kb/TS1722 for solution.
Stefan -
Just installed windows 7 on my macbook (Mac OS X Snow Leopard) using bootcamp. Windows 7 works great, but I can't get back to my Snow Leopard. When I log off or shut down Windows and try to start up again, all I get is Windows. How do I get back to my mac operating system?
If your Mac is off then start up. As soon as you hear the boot chime, hold down the Option key until the Mac and Windows Disks show up. Then click on the Mac disk and the arrow below it. After it boots up in Mac then go to System Preferences>Startup Disk and select your Mac partition as the Startup disk.
If you are in Windows then look for the Boot Camp icon on the taskbar. It will look like a gray box sitting on one corner. One of the options when you click it is to restart in Mac OS. After it boots up in Mac then go to System Preferences>Startup Disk and select your Mac partition as the Startup disk. -
Using bootcamp to install XP followed by Photoshop and other Adobe products
I just got MacBook Pro and am about to use Bootcamp to install Windows XP so that I can use Photoshop and other such Adobe programs. Anybody, who has done this, what can you tell me about it? Does it work well? How much of a partition do you recommend? Have you encountered any problems during this process? Are there any major dangers involved with installing XP on my mac?
I have done all of the above with No Issues thus far:
1) Boot Camp/Windows partition I use is 50MB for XP SP2
2) I have Adobe Photoshop 7.0 installed
3) No problems on my side
I printed out the Boot Camp/Windows instructions and followed them exactly.
Axel F. -
Using Bootcamp to install XP for use of Adobe products
I just got MacBook Pro and am about to use Bootcamp to install Windows XP so that I can use Photoshop and other such Adobe programs. Anybody, who has done this, what can you tell me about it? Does it work well? How much of a partition do you recommend? Have you encountered any problems during this process?
I've had bootcamp on my MBP since last December and all my Adobe products run fine, Photoshop, Illustrator, Lightroom, Premier Pro CS3, no issues at all.
-
I have Windows 7, Microsoft Outlook and PSE 13. I have used the "Share photos as embedded images" feature frequently, but today when I went to use it, it wasn't there, only the option to send email with files attached. How do I get back the ability to send emails with photos embedded. I like adding the frames and backgrounds and I think it's easier for recipients to look at the photos. Thanks for any suggestions of things to try.
GailI had a similar problem in that my wife's iphone 5 could not send pics with imessage. Had to set the settings to default to SMS or whatever. After laboring many hours on the web I coincidentally was on the phone with the internet people to question my internet speed. They changed the router channel, which is something that I am capable of doing myself. After that, the pics go over imessage. My own Iphone didn't have the problem. We are both latest IOS 7.0.6.
-
my mac book air can't start installation, because i use windows installation in DOS to make partion, now no mac os on it. How to get back the mac os? i have a window based iso image from a friend, because in my country there is no Apple service.
It sounds like you destroyed your boot partition and the recovery partition. Depending on it's age, your MacBook Air might be able to do a net boot. Plug and ethernet connection into it and attempt to boot. If it has the right firmware, it will find a net boot configuration on the net and boot that. Then it will give you a Recovery Partition like display and allow you to reinstall the OS X version that came with it.... assuming that it was Lion or ML. If your computer came with Snow Leopard, then even the net boot won't work.
At that point you need a bootable USB Key, or an external DVD drive AND a Snow Leopard installation DVD.
An Apple Store, if there is one nearby, MAY be able to get you going again. However, whatever is on the SSD now will be toast too.
Maybe you are looking for
-
Which BAPI to use for GR for PO reversal (mvt 102)?
I'm trying for look for a BAPI that can used to post GR for PO reversal, which is mvt 102. I try to use BAPI_GOODSMVT_CREATE to do it, but I encounter errors, I have tried different set of parameters, but all are not sucessful. Below is the few set o
-
Optical Drive not recognized by Windows 7
I have a Satellite A305-S6857 that I upgraded to Windows 7 and the BIOS shows that I have an optical drive but Windows doesn't. I've tried deleting filters in regedit, didn't work. I unchecked "hide empty drives" in the view options. I don't what to
-
Did anyone try to download the client.jar and invoke the service from a different address. (http://localhost:7001/msg/examples.soap.msgService.MsgSend/index.html) I tried to compile a ComsumerClient class for webservices/message example and I get the
-
Duplicate Journal Entry and system crash
Hi All, Just wondering anyone experience when duplicate the journal entry and change the posting date and system will just hang and follow by crash? Please advise. Best Regards, Foong Yee
-
I did some searching on the forum and figured out how to find the file size of individual articles inside a folio (Acrobat.com), but I can't figure out a way to check the entire folio size (all articles added together). Is there a way to do this shor