HT5639 After installing the windows 7 64 bit, it will restart automatically with error in blue screen. in this case what should i do? i have using bootcamp 5
After installing the windows 7 64 bit, it will restart automatically with error in blue screen. in this case what should i do? i have using bootcamp 5
if it's restarting directly into an error, you can try troubleshooting (might be painful) or re-install windows with boot camp
Similar Messages
-
Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524
Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524,
The system shows everything is ok.
Please any help greatly apreaciated.
Thank you
ValentinValentinT, welcome to the forum.
There are no drivers available for Windows 8. I suggest checking in the Control Panel/Sound/Recording to assure that your microphone is selected. It seems that the Sound is one area that gets changed when updating to Win 8.1. At least, this is what happened to me.
Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
After installing the windows 7 on the Macbook pro, i accidentally disabled the Macintosh hd and Recovery Hd and now now cant see them on start up
I need to boot to macintosh but i cant see the drive nor to restore to the fastory settings through recovery HD, What can i dohold down the option key during boot it give you the option of what parition you wish to boot into
-
After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?
My gmail, which is correctly configured for Mail with gmail SMTP and Google IMAP, works for awhile on Mail, which I leave open while working on other applications. But several times a day I get msg from Google: "We recently blocked a sign-in attempt to your Google Account" . . . and requiring me to verify my account details, re-enter passwords, confirm security settings (or change them from "disable" to "enable less secure methods" and so on). In Mail I also have tried "taking all accounts online", and re-entering my gmail password inside Mail account settings. These steps successfully re-set comms between gmail and Mail ... for awhile, then it happens again. Enough occurrences over a work day that I just quit Mail and revert to accessing gmail directly. Apple Care advisor and an Apple knowledge base article say that Apple can't deal with this, as gmail is third-party app, and they refer me to gmail, and so far I've found nothing helpful there.
From today I also have several instances of a window saying "Mail has unexpectedly closed" and asking me to Re-open it.
I also use Yahoo mail, which stops working with Mac Mail at the same time as gmail, but I do not receive notices to re-verify from Yahoo.
I recently upgraded from Mavericks to Yosemite. The Mail problem happened occasionally with Mavericks but is far more frequent with Yosemite. -
After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.
IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost -
I can not install the newest version of iTunes because of a file that can not be found. This is what I am seeing:(The feature you are trying to use is on a network resource that is unavailable. C:\Documents and Settings\Aubrie\Local Settings\Application Data\Apple\Apple Software Update\)
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
http://majorgeeks.com/download.php?det=4459
Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
There is a problem in my iPhone device after updating the new version needed to ActiveX wants amyl, bus and my Lord and unfortunately forgot this data, what work Please reply my machine data is
Imei: 013055008069758
SerialNumber:DN*******TC0
mlbserialNumber: DQ************42D
plz hlep me
<Personal Information Edited by Host>There is a problem in my iPhone device after updating the new version needed to Active iPhone 4s
and
I upgraded to 7.0.3 yesterday and now my battery only lasts about 4 hours with very little active use.
iOS 7.0.3 -
There is a problem in my iPhone device after updating the new version needed to ActiveX wants amyl, bus and my Lord and unfortunately forgot this data, what work Please reply my machine data is
Imei: 013055008069758
SerialNumber:DN*******TC0
mlbserialNumber: DQ************42D
plz plz plz hlep me
<Edited by Host>There is a problem in my iPhone device after updating the new version needed to Active iPhone 4s
and
I upgraded to 7.0.3 yesterday and now my battery only lasts about 4 hours with very little active use.
iOS 7.0.3 -
sign in to itunes store will not disappear and the whole IPad will not let me go into other screens till this pop up goes away. I have entered the password several times and still will not disappear. Turned the IPad on and off but the pop up remain
FIrst try a soft reset by holding down the home & sleep/wake buttons until the Apple logo appears then let go & let the iPad boot up normally.
If that doesn't help then to make sure you have a strong internet connection.
Try resetting Network Settings
Settings->General->Reset->Reset Network Settings,
You won't lose any data but will have to log back into your wifi networks.
Once logged back in and when the pop-up appears, try entering your password again. -
Can't access the recovery console after installing the Windows 7 RC
Hi all,
I recently installed the Windows 7 RC to give it a go but I've found that it kills my battery life so I decided to go back to vista, however when I press the blue button on start up to access the recovery console I just get a screen that asks me if I want to enter the BIOS or choose another boot location... I used the upgrade option in Windows 7 so I don't see how I could have deleted the partition with the recovery console...
Is it posible for me to restore my tablet to it's factory settings?The install of Win 7 removes the TVT boot manager applet and sets the master boot record to Win 7 partition only.
The Lenovo supported method of restoring your preload would be thru the use of Recovery CD's.
You might be able to change the bootable partition from the win 7 partition to the recovery partition, thru some
3rd party apps.
Terry
LESE
Win 7 beta test -
TS1967 after installing the latest version of itunes it will not recognise my ipod
I installed the latest version of itunes to my computer but now when i connect my ipod to the computer, itunes does not recognise it and wont sync any new music to it.What can i do?
Hey becky612,
Thanks for the question. I understand that your iPod nano is not recognized in iTunes after updating. The following troubleshooting articles may provide a resolution based on your symptoms:
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Thanks,
Matt M. -
I have had Windows 7 64 bit for the past year and have run Firefox with no problem. It was the most problem free of the three browsers including IE and Chrome.
I have a Vista side where I run my online backup and did so yesterday. Went on Firefox. No Problem.
Today I booted into the Windows 7 side. Seemed to boot up okay. Until I opened Firefox. Suddenly, my whole computer crashed, windows shut down and that bluescreen popped up. I restarted normally. Same thing. I restarted in safe-mode. Couldn't find any problems. Went back to regular mode. Started FF. Boom crash.
Back to safe mode. Did a system restore. Back to regular startup. Didn't help. Attempting to open FF crahed windows.
So back to safe mode. Started Firefox. Crashed the whole computer and same blues screen.
So I uninstalled FF. Reinstalled FF. It still makes Windows crash.
So now I am on IE :PSee below -- the way I asked the question the first time may not be clear. This post was a goof but I can't figure out how to delete it
-
Signing the windows mobile 8.1 application from commandline fails with error
Hi,
I am trying to package the Windows Mobile from commandline using the following commands
a) Package the application and create an unsigned appx.
"C:\Program Files (x86)\Windows Kits\8.1\\bin\x86\MakeAppx.exe" pack /l /h sha256 /f ARM\Debug\package.map.txt /o /p "D:\apps\win\mobile\testWebView\AppPackages\testWV.appx"
b) Create the self-singed certificate *pvk and *cer
"C:\Program Files (x86)\Windows Kits\8.1\bin\x86\makecert.exe" /n "CN=rmahajan" /r /h 0 /eku "1.3.6.1.5.5.7.3.3,1.3.6.1.4.1.311.10.3.13" /e "12/31/2016" /sv myCertRM.pvk myCertRM.cer
c) Create *pvx from *pvk
"C:\Program Files (x86)\Windows Kits\8.1\bin\x86\pvk2pfx.exe" /pvk myCertRM.pvk /pi "rajatm" /spc myCertRM.cer /pfx myCertRM.pfx /po "rajatm"
d) Signing the unsigned appx created in first step.
"C:\Program Files (x86)\Windows Kits\8.1\bin\x86\signtool.exe" sign /fd sha256 /f "myCertRM.pfx" /p "rajatm" "D:\apps\win\mobile\testWebView\AppPackages\testWV.appx"
Done Adding Additional Store
SignTool Error: An unexpected internal error has occurred.
Error information: "Error: SignerSign() failed." (-2147024693/0x800700cb)
All the above commands work while the signing command fails with the above error. Could someone please tell me what i am doing wrong here?Your Windows Phone 8.1 app will be signed when you upload it to the Windows Store.
Jeff Sanders (MSFT)
@jsandersrocks - Windows Store Developer Solutions
@WSDevSol
Getting Started With Windows Azure Mobile Services development?
Click here
Getting Started With Windows Phone or Store app development?
Click here
My Team Blog: Windows Store & Phone Developer Solutions
My Blog: Http Client Protocol Issues (and other fun stuff I support) -
ITunes stops immediately upon opening after installing on Windows 8 64 bit Laptop
I've installed and uninstalled iTunes 11.1 64 bit version several times but every time I try to open it I get the error message that it has stopped running and windows will try to find the probelm. Unfortunately Windows doesn't tll me anything.
My other machines (XP, Vista Home and Windows 7) work fine with the latest iTunes versions.
Would appreciate any help. I've tried all the help documents on Apple's site.
BobiTunes 11 works fine on my three Win 8 PCs
Try:
Trouble installing iTunes or QuickTime for Windows
Next try posting in the iTunes forum. -
C6380 is installed in Windows 7 64-bit but will not print
I recently bought a Pavillion dv-2210ev windows 7 64bit, and would like to wi-fi connect it to my c6380. It works well with my desktop (wirelessly also), and got the Solutions Center installed perfectly on the Pavillion. It scans as requested from the computer.
However, it won't print. I will send a document to the printer (c6300 series), but it doesn't even get to the print queue, and won't print on the tray. No error messages at all. Just silence. Only the pop-up window down right corner of HP saying that print job is starting.
I tried 2-3 reinstalls, tried to create a port myself (locally and then standard IP/TCP as suggested by some people here), even created some rules for the firewall which I found from the Network Diagnostic Program that's on hp.com. I tried the trick with the bidirectional support and it didn't work either.
Any ideas? This c6380 starts to hit my nerves, since it works only with the desktop, and not painlessly all the time.Try to delete printer in Control Panel and re-add:
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing.
2. Click >> Start >> Control panel >> Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's host name (found on the printer's network configuration report the generated above). Click Next.
If you get a message about Additional Port Information Required, then the printer was not found using the host name. You can go back and retry or using the printer's IP address instead of the host name.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Make a choice and click Next.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP
Maybe you are looking for
-
Down payment request for other special GL transactions
Hi ALL, Is it possible to post down payment request for other special GL transactions? If not , I Have a scenario that I have to generate down payment request with different alternative reconciliation accounts , but same reconciliation account. As we
-
'Check Battery' at 73 cycles. Any warranty?
My Macbook battery seems to have gone kaput and my Macbook will only work if I have my power adapter plugged in. It seems like my battery is at fault, since most of the threads I've read here say that if it does say 'check battery', that means it's d
-
Customer Overviews - Functions in Interaction Center for Financial Customer Care - SAP Library
To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English. You can also go back to the SAP help page.
-
Hi, I am getting a problem when I process PDF for eBook. PDF size is 75 MB. RAM Size used for server is 2048 MB. Error is as follows Creating package request for: 03-01-13/123-5265.pdf Creating connection to Packaging Server: http:// XXXXXXXXXXX/pack
-
I have 3 drop down boxes in my report done SQL SSRS .. I want t to put them in the same row (just one row) ..how can I do it.?