I have windows 7 32bit and itunes will not install

The Apple Installer found Itunes and tries to install it but then half way through the install after it completes the downlown it say there was a network error and the installation fails.
The problem is that for some reason it got far enough along to have removed the old version of the Itunes that had been on my system because that is now nowhere to be found.
This makes backing up my daughters Ipad rather hard now...

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or by right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Similar Messages

  • I have windows 7 and Itunes will not start on my computer

    Itunes at one point use to start on my computer, it now longer does, I have uninstalled it and installed it again

    I feel your pain.
    My iTunes was working perfectly until 2 days ago.
    iTunes will not sign into the store - it says there's an apple id or password issue.  But, I can login to this Community perfectly, with the same apple id and password, without issue, so it can't be that........
    I have done  fresh install of iTunes 10.6.3.25, but it doesn't make any difference.   A consequence of all this is that my iPod Touch can't access it either.
    I've started a ticket with Apple on it, but  I strongly suspect that there's something gone AWOL within iTunes itself......

  • TS1369 I have windows 8 and itunes is not recognising my ipod can anyone assist?

    I have windows 8 and itunes is not recognising my ipod - anyone assist?

    Hi Moclam12,
    Thanks for visiting Apple Support Communities.
    If your iPod classic is formatted for Windows, and you want to sync it with your Mac, try to force the iPod into Disk Mode and then restore it using your Mac.
    Putting iPod into Disk Mode
    http://support.apple.com/kb/HT1363
    Restoring iPod to factory settings
    http://support.apple.com/kb/HT1339
    If the iPod is not recognized by your Mac when it is in disk mode, the troubleshooting advice in this article may help:
    iPod not recognized in iTunes and Mac desktop
    http://support.apple.com/kb/ts1410
    Best Regards,
    Jeremy

  • HT1349 I don't have a MAC, I have a PC and itunes will not run because I had an update and now it says msvcr80.dll isn't working or not installed and wont let me run itunes help me fix it.

    I don't have a MAC, I have a PC and itunes will not run because I had an update and now it says msvcr80.dll isn't working or not installed and won't me install or run itunes anymore help me fix it.

    MSVCR80.dll missing, cannot install iTunes - https://discussions.apple.com/message/24618776

  • MultiMedia Center for Think Offerings for Windows XP and 2000 -- will not install on Windows 7

    MultiMedia Center for Think Offerings for Windows XP and 2000 -- will not install on Windows 7  in compatibility mode or any other way. I receive error " can not open \device\memory" and then " This program can not run on his hardware.
    Thinkcenter E series 8291-ETU --- upgraded from XP to Windows 7 yesterday.
    Any ideas on how to get this product installed in Windows 7 ?

    I recently did a clean install of Win7 Ult on my X61 7676A24, and this is the only Lenovo software that I could not find a Win 7 solution for. However,
    1. I was able to load WinDVD8 upgrade (from Lenovo's Win7 information page) after first loading the WinDVD5 version that was the last good release for Vista.
    2. The Multimedia Center for Think Offerings is basically Roxio's suite for writing cd/dvd's, drag to disc and so on.
    Since I could not load this anyway, I was forced to try out Win7's inbuilt cd/dvd writing - it works perfectly well.  Even better, Win7 natively supports an excellent ISO burning tool. So, I think if you explore these inbuilt tools, you can probably live without the Mul Cent for Think Off.
    TP600E > T41 > X61 > X201T > X220 i7 IPS 8GB 160GB SSD

  • HT4759 iCloud and iTunes will not install on Windows 8

    I've had to upgrade to Windows 8 and I cannot get either iTunes or iCloud to install.
    I have tried:
    -installing as Administrator
    -installing in Compatibility Mode as Windows 7
    -installing as Administrator in Compatibility Mode
    -disabling my firewall while doing the above
    Does anyone have any more suggestions?  I really need to be able to connect my iPhone and offload photos and organize my music again.
    Thanks,
    Lisa

    Thank you for your beautiful input.
    If you wrote that it wasn't a fresh installation, I missed it.
    Of course, for removal of iTunes and its re-installation there is a comprehensive document.
    Which is quite an involved procedure and all 'Apple' components have to be removed in specified order, removal verified and then iTunes installed.
    Regards

  • HT203345 quicktime and itunes will not install on windows 7 (64) ?

    I have been trying for hours and hours to download and install Quicktime/iTunes on a PC with windows 7 (64bit).
    It installs until 'Publishing Product Information' then it says congratulations its loaded. then I get :
    Apple application was not found.....Apple Application Support is required to run iTunes Helper, please uninstall iTunes and the install again.
    which I have over and over and over for hours and hours.
    all I want to do is install Quicktime for Windows can someone please help me with what I am doing wrong ?
    Regards.

    Hello db133,
    Thanks for using Apple Support Communities.
    From your post I understand that you're unable to open iTunes after installing it due to an error with the Apple Application Support.  I see that you've gone through and reinstalled multiple times, but there are specific steps for removing and reinstalling iTunes which I think would help resolve this issue.  Those steps are found in the article linked to below.
    Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
    Have a great weekend,
    Alex H.

  • How does new owner of my PS9 install as I have deactivated code and it will not install on new pc?it says deactivated!

    i bought PSE 12 so sold PSE 9 after deactivating and removing from my pc. New owner cannot install as when he puts product code in it says deactivated. How does he install?

    Did you transfer the license?
    Transfer an Adobe product license

  • Windows 8 and itunes can not detect itouch

    I have windows 8 and itunes will not detect my itouch?   Any tips?

    Chris CA, I am having the same problem. I actually just purchased a brand new laptop (w/ Windows 8 already installed) and had to download itunes latest version (ver. 11) and am having the same problems. As my itunes seems compatible with my Windows 8, my itouch device can not be recognized by itunes or in the "my computer" folder.
    perhaps this more of a windows 8 issue and not an itunes issue?
    PS, i have OS4 on my itouch, could this be a problem as well?
    Thanks!
    Petit

  • Itunes will not install..windows INSTALLER service not available.windows 7

    I am trying to find a fix for this...just bought a new computer with windows 7, all updates have been performed. Itunes will not install...it just stops and says "windows installer service not available" Can't find a stand alone downloadable version of installer 5.0 which is what comes with 7 from the research I have done. I have the newest version of itunes saved on desktop, tried running it from desktop, tried running as admin, tried several other ideas that I found on here and Microsoft..but nothing is working. Any advice?
    Message was edited by: ehindahl

    Same error message "This version is for a 32 bit computer, yours is a 64 bit!"
    Doublechecking ... by any chance did you migrate a 32-bit version of the iTunes, Apple Mobile Device Support and Bonjour programs to the 64-bit machine from a 32-bit machine using the PC Mover utility?
    (Your symptoms are consistent with that ... the installer service throws the message when trying to uninstall the 32-bit itunes and related 32-bit componentry prior to installing the new 64-bit versions.)

  • Hi- I applied the iTunes up to my Windows 7 86bit PC last Wednesday and iTunes will not load due to a Runtime error r6034Access to C Runtime Library Incorrectly. Then I get an windows error code 1114. I have tried rollling back and reinstalling but no joy

    Hi- I applied the iTunes up to my Windows 7 86bit PC last Wednesday and iTunes will not load due to a Runtime error r6034Access to C Runtime Library Incorrectly. Then I get an windows error code 1114. I have tried rollling back and reinstalling but no joy

    Hi Keen itunes User,
    Thanks for using Apple Support Communities.  This article has steps you can take for the error you're seeing:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Ari

  • I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi.  I have searxhed evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason.

    I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi.  I have searched evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason. I can't upgrade for my icloud account.

    Try the following steps:
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

  • I just upgraded to relaese to release 11.  My PC runs Windows 7.  itunes will not start.  I have run Norton to fix the registry errors and have rerated my PC twice.  No luck.  Can anyone provided a suggested solution?

    I just upgraded to relaese to release 11.  My PC runs Windows 7.  itunes will not start.  I have run Norton to fix the registry errors and have rerated my PC twice.  No luck.  Can anyone provided a suggested solution?

    This solved everything, after uninstalling IObit Advanced SystemCare iTunes would open with Bonjour enabled however iTunes wouldn't pick up the iPhone device. I did some more digging and a few of their other applications had been installed including Game Booster. Uninstalling that put everything back to normal.
    I have been given a new device by Apple who were really helpful and the guys have neever seen the docking connector disabling before. Coinsidence?
    Anyway in case this helps other people these were the symptoms (might help with searches):
    - Windows 7 Ultimate 64bit
    - iTunes 10 wouldn't open originally, just egg timer then nothing yet processes all started
    - Docking connector died on the device, wouldn't even trigger a standard USB connection or light up the device
    - Uninstalling iTunes etc didn't change anything
    - Disabling Bonjour worked but iTunes extremely unstable, seems frozen when syncing and the sync itself, especially with app transfer, was extremely slow and the other buttons were unresponsive after clicking for two minutes before screen would change
    Have sent feedback to IObit about this to see if there isn't something that can be done.
    Fantastic assistance and an incredible spot from b noir. If you come to the UK you need to drop me an email as I owe you a night out on the town!
    -

  • I have Windows 8.1 and Itunes will not recognise either my Ipad, Ipone or Ipod

    I have Windows 8.1 and Itunes will not recognise my Ipad, Iphone or Ipod even though it did so in Windows 7

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or by right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!

    I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

    Try this:
    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

Maybe you are looking for

  • POST request in a login script

    I have a strange problem when the variables that are passed to a PHP script dont get recognized in an equal statement. The java code : tring value, value2;      try {      BufferedReader stdin = new BufferedReader(new InputStreamReader(System.in));  

  • How to create extra partitions for windows 7 after installing boot camp

    hello i am pretty new at imac so bare with me and i really need help. IMAC OS X version  10.9.5  ( i think its os X mavericks ??) iMac 21. inch  , Late 2013 iMac model identifier  iMac 14,1 i installed boot camp windows 7  and it works perfectly, aft

  • Keep getting "General Install Error" when installing Flash Player 13 on Mac OSX 10.9.3

    For about 2 weeks now I've been getting software update notifications for Adobe Flash, Adobe Reader and Adobe Acrobat X. Every time I run the update install I get an error that will not allow it finish. For Flash specifically that error says "General

  • Webservice creation for SAP XI/PI Scenarios

    Hi, How can I develop A simple Webservice for any scenario, for example, if am doing File to file copy scenario,So I want to develop a Webservice for the same scenario, I want to develop webservices for the entire Scenario, for this I am Using Micros

  • Creating nested packages

    hi, i want to know if any feature provided in 9i regarding creation of nested packages as if in java. Thanks, Suresh.