I imported a new font into keynotes, but shows as Lucida Grande

Ok, so I imported a new font to be used in my keynote as part of our companies profile presentation (Brush Stroke). It was imported, and shows in Font Book, as well as the font selector in keynote.
However, everytime I select it to change the current font from whatever it is to Brush Stroke it always appears as Lucida Grande??
Any help? Am I missing a step? Did I do anything differently?
Thanks!

Did you use Font Book to install the font correctly (file > add fonts) ?
Use font book to validate the Font file > validate font

Similar Messages

Is it possible to import a pdf figure into Keynote for iOS?

Hi,
I was eager to use Kynote on my new iPad Air to make some presentations. But I use a lot of vector graphics in pdf and eps format for my figures. I found out that it is not possible to import such file format into Keynote for iOS. I understand that .eps might be quite outdated already and will never be supported but pdf?!
It would be best if I could insert my figures directly from Dropbox but since this doesn't seem possible I would be happy to download my pdf figures to iBook for example and import them from there. This doesn't seem to be possible either. Keynote allows me only to browse my photos and it is not possible to put pdf files in Photos.
Overall - big disappointment from Keynote for iOS to me. It is unusable for my needs and preferences.

You can import pdf's in keynote!
Make a pdf with Indesign or something like that. Make sure your pdf has the same resolution as your Ipad: For example, Ipad Air: 2048 x 1536 pixels. (In Indesign, you'll have to create a doc with intent Web (instead of print).
Then, use a file manager app, like File Manager Pro (https://itunes.apple.com/NL/app/id558270538?mt=8&affId=2083450) to copy the pdf's to your Ipad by using WIFI.
In the app File Manager Pro, just select your pdf and copy it.
Now start Keynote, create a new presentation and create a blank sheet.
Now you can paste, and your pdf will appear, transparant and exactly the same size as your presentation.

Is it possible to make is so that, immediately after I import a new clip into FCP, the file is automatically selected in the Event Library? (Similar to how After Effects and Premiere work).

Is it possible to make is so that, immediately after I import a new clip into FCPX, the file is automatically selected in the Event Library? (Similar to how After Effects and Premiere work). Right now, after I import a new file, I have to then go searching for it amid all the other files in my project. It would be extremely helpful if the file I just imported was already highlighted and selected after import, making it instantly "locatable" and ready to go.

Kryan73 wrote:
… after I import a new file, I have to then go searching for it amid all the other files…
in a perfect world, you do know the recording date, and you simply scroll to that date.
in a very perfect world, all your other imports are already tagged, so just have to create a smart list 'unrated' ...
(I know those messy Events… a friend of mine constantly ignores my advice to check the time/date on his camera; on every battery swap, the cam creates a very erratic timestamp ... his actual recordings are listed as made in "2004" or in "2020" .... )

Import a prezi presentation into Keynote??

Can I import a Prezi presentation into Keynote?

The only type of presentation Keynote can import, is PowerPoint.
If you have original the original images as TIFF JPEG or PNG images, you will need to add them to each slide in Keynote.

How to add a new font into Report Builder and Oracle Forms/Reports Server?

Hi,
I've searched the forum and can't find this being discussed.
My developers run Report Builder 10.1.2.0.2 on their XP laptops.
Their reports run (in production) on Oracle Forms/Reports Server 10.1.2.0.2.
This server runs on MS Windows 2003, SP2.
They've got a client who wants reports using the "Garamond Western" font.
So....how do I get this font onto the developer's Report Builder laptops, and onto the Oracle Forms/Reports Server?
I've moved various 'Garamond' fonts into C:\WINDOWS\FONTS on both the laptops and the server, but neither seem to recognize it.
Thanks for your help.

Thanks.
This answers 1/2 of my question.
The developer can now use Report Builder on his laptop, with the new fonts.
But when he moves this new Report to the Oracle Application Server/Forms-Reports Server, it fails to use the new fonts.
The Oracle App Server/Forms-Report Server is Version 10.1.2.0.2. It runs on MS Windows 2003, SP2.
I have installed the exact same fonts on this server, into C:\WINDOWS\Fonts.
I have used REGEDIT to change REPORTS_PATH....and placed C:\WINDOWS\Fonts; as the first value in this field.
I have then stopped and restarted the Forms-Reports Server.

IX4-300D how do I import a new drive into RAID 5 Array?

I already had a 3 x 2TB RAID 5 array, added new forth drive (same 2TB drive model) and let it auto format, which completed OK, but when I look at Status in Admin I see "Unallocated 1.8TB". This tells me the drive was formated but not imported into the Array.
Looking at Drive Management Page it shows all four drives installed but offers no actions, you cannot even select a drive to display or take action on.
Going into Settings only shows the settings I used to create the RAID 5 initially, no other options. I would expect a workflow of right click new drive and select to import into RAID 5.
Looking in the help section no detail on RAID only a basic comment on what RAID is.
Something badly missing here. Is there some info I have missed?
Peter

Hello 2Old2Slow
I highly recommend that you do make plans to backup your data from the unit before attempting to expand the RAID just in case something goes wrong in the process.
When trying to expand an existing RAID 5 from 3 to 4 disks, you can use the "add disks to storage system" option that is located in Drive Management>Settings. This option will become available after a new drive is added to the empty drive and the unit is powered back on. It may need to overwrite the new disk, it will indicate which disk is being overwritten by marking the new drive with green stripes. If you are being asked to overwrite data but none of the disks show green stripes, please stop and backup first as proceeding will most likely result in all disks being overwritten.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

How to import DVD-R movie into Keynote?

I just transferred a video (with audio) from a VHS tape to a DVD-R, using a stand-alone DVD Recorder. Now I need to import this into Keynote. I've tried opening/playing the DVD with iMovie iDVD, and Quicktime but they will not recognize it as a readable file. The only application that I have that even will play the disc is DVD Player.
Any suggestions how I can get this movie into my Keynote presentation will be greatly appreciated.
Thanks.

as log as there aren't copyright issues aren't a problem, something like Handbrake should work to convert the file to something keynote can read.
http://www.versiontracker.com/dyn/moreinfo/macosx/21117

Can't import MapInfo TrueType fonts into MapBuilder

Hi forum
I am trying to import TrueType fonts from MapInfo, that we used to use in the MapInfo application, that we are migrating from. I try to use the "Import TrueType font" function in MapBuilder, but when I want to view the font afterwards, I just get a blank page. I have tested with the font MapInfo Cartographic (TTMICG__.TTF), which you can obtain as part as the free "MapInfo ProViewer" package from MapInfo, available here:
http://extranet.mapinfo.com/products/download.cfm?ProductID=1062
My own first idea was, that the underscores in the filename might cause trouble, but that doesn't seem so. Renaming the TTF file didnt make any difference. The file seems to import ok, but the Preview window remains empty.
I have tried importing a "standard" font like Times New Roman, and that appears to work fine. Are there any specific type of TrueType fonts, that MapBuilder does not like, and which you therefore for some reason cannot use in a marker style for MapViewer?
Thanks in advance

Hi Jacob,
look this thread: MapViewer 11g / MapBuilder / TrueType Fonts

Importing MPEG 4 Movie into Keynote 2

After spending 5 days trying to import MPEG 4 video from a Canon Optura 500 videocam, I have learned:
Can't be done. Calling Apple help today, confirmed no possible solution to get the movies into Keynote. I tried everything and read all help information in Keynote and imovie.
What I did for a do or die presentation: Import clip from camera (no editing allowed, as your edits will be lost on transfer) into imovie, copy and paste from imovie to keynote 2, copy and paste from Keynote 2 to POWERPOINT!
click on movie on a powerpoint slide and click view, click custom animation, click on your clip and click extras, pick play on click, and you can now play your MPEG4 movie in a slide show.
An apple rep once told me, in an Apple store, that "Keynote was Powerpoint on steroids". See how bad steroids are for you.

sigh...while Keynote is an amazing product, the Apple store workers tend to over hype it, to the point of making it sound like it has EVERy feature of PPT, when it's really missing a ton of stuff still. Visually though, I have to agree, it makes PPT look like a toy.
That said, I'm trying to figure out what exactly your process was, and what did and didn't work. I looked up the specs on the 500, and it appears that while you can shoot in true DV format onto mini DV tape, it also shoots Mpeg4 onto the photo card. Is this what you shot in (as opposed to DV format onto tape)? If so, I'm trying to figure out how you even got it into iMovie as opposed to iPhoto, which is what you use to import movies from a media card. Also, I don't understand your comment on edits getting lost.
Next, your use of the term slide show is confusing, but I THINK what you'd like is to see the movie sitting there on a poster frame until you want it to play, and then click to make it play. You can do this to an extent, but you have to work around a few missing features in Keynote. Keynote STILL won't let you leave the poster frame showing on the slide and then have the movie play on a click...you'll actually see NOTHING until you trigger the movie as you have to add a build to the movie, and until it builds, you won't see the thing. The work around is to grab a frame of the movie and paste it onto the slide, then build the movie in right on top of it.
I hope that helps. If you can give more details on what you did and what you TRIED to do, and what you want to end up with, I can try to help you figure it out.
EDIT: ah, I see this in a review "Playback of media from the card and the tape is available in playback mode, as is recording to a VCR or a digital video (DV) device using a FireWire cable." which means you "should" be able to import into iMovie. The real draw back is you're working with mpeg4 and not DV...and Mpeg4 is REALLY compressed, not a good format to use if you plan to edit it as you'll have to decompress and recompress, losing quality (DV is also compressed, but not nearly as much).

How do I capture tape-based media to my external hard drive? There is only one firewire 800 port on the back of my I mac. The manual says to import tape footage directly into fcpx, but then I lose my external hard drive. thanks for your help.

In FCP X How do I capture tape-based media (hdv clips)- which I want to import-to my external hard drive? There is only one firewire 800 port on the back of my I mac. The FCPX manual says to import tape footage directly into final cut, which works, but then I lose my external hard drive Do I have to import it into an event, then copy it over to an external hard drive? On Larry Jordan's tutorial, he has 3 external hard drives that show up on his monitor WHILE he imports his tape based media. How is that done? I can only get either the camera to appear OR my external hard drive. thanks for your help.

Thanks for your response, but that doesn't solve the problem. Yes, the LaCie hard drive has 2 firewire ports-
I have always done what you suggest (works fine in FCP7), but in FCPX when I do that the camcorder icon
does not appear. It only shows up when I DIRECTLY import the footage via firewire. ????

Can't find new fonts in Keynote

Hi,
I've installed some new fonts via Font Book.
However, they are not showing up in the font menu in Keynote.
How do I get it to show up so that I can use them?
Using Keynote 6.5, Yosemite 10.10.1

AH!!
I didn't reboot after I validated the fonts thats why.
Thanks very much!

Getting new font into BOBJ Edge 3.1

Hi all. I have installed a new font on my server (Book Antiqua). I then open the fontalias.xml file and the i18n.xml to get this font seen by the Enterprise system. Everytime I do this and clear the cache and reboot the server my DesktopIntelligenceProcessingServer becomes disabled. I have no idea. Here is the code that I am adding to the fontalias.xml file:
<FONT NAME="Book Antiqua">
    <FONTFAMILY PLATFORM="ttf" NAME="Book Antiqua">
      <FONTATTRIBUTE BOLD="false" ITALIC="false" LOGICAL="Book Antiqua" PHYSICAL="bkant.ttf"/>
      <FONTATTRIBUTE BOLD="true" ITALIC="false" LOGICAL="Book Antiqua Bold" PHYSICAL="antquab.ttf"/>
      <FONTATTRIBUTE BOLD="false" ITALIC="true" LOGICAL="Book Antiqua Italic" PHYSICAL="antquai.ttf"/>
      <FONTATTRIBUTE BOLD="true" ITALIC="true" LOGICAL="Book Antiqua Bold Italic" PHYSICAL="antquabi.ttf"/>
    </FONTFAMILY>
    <FONTFAMILY PLATFORM="win" NAME="Book Antiqua"/>
    <FONTFAMILY PLATFORM="java" NAME="Book Antiqua, Arial, Helvetica, 'Courier New', 'Times New Roman'"/>
    <FONTFAMILY PLATFORM="html" NAME="Book Antiqua, Arial, Helvetica, 'Courier New', 'Times New Roman'"/>
</FONT>
and here is the code that I added to the i18n.xml file:
<font name = "book antiqua">
   <os type="all">
             <Attributs style="0" filename="Book Antiqua" encoding="CP1252" aliaspsname=""/>
             <Attributs style="1" filename="Book Antiqua-Bold" encoding="CP1252" aliaspsname=""/>
             <Attributs style="2" filename="Book Antiqua-Italic" encoding="CP1252" aliaspsname=""/>
             <Attributs style="3" filename="Book Antiqua-BoldItalic" encoding="CP1252" aliaspsname=""/>
   </os>
Anybody have any ideas as to why this knocks off that server?

Figured this out on my own. The i18n.xml file has different font sections. The first is <T1> and the second is <ttf>. I was adding my font into the <T1> section when it is actually a <ttf> font. As soon as I moved the code and restarted everything worked fine.

Is it possible to import a new hierarchy into an existing version?

I want to add a new hierarchy to an existing version . Is it possible to do via import process?

The import process by definition always creates its own version. The process to incorporate a new hierarchy int an existing version is as follows:
1. Create the IMPORT and run the import into a new version that you specify.
2. Validate that the hierarchy in the new version is as you want it.
3. Create a BLENDER and run the blend using the new version as the source and the version you want as the target. Make sure you blend the properties that you created during the import process as well.
4. Validate that the BLEND was successful into the working version you wanted it to go and that the properties and structure are as you want them.
5. Delete the new version you created in steps 1&2 above.
Following these steps will incorporate the new hierarchy into whatever existing working version you want.

How exactly to load new fonts into Gimp???

Hi,
I've tried everything I can find in teh forums and the wiki to load fonts into Gimp 2.3. They just will not appear in the fonts dialog. It's driving me nuts.
Can someone please spell out exactly how to do this?
I've loaded the fonts into /root/.fonts - no go. I've loaded them into gimp's font dir - no go. I've run fontcache - no go.
I'm at my wits end.
Jim

You should put the fonts in your user's ~/.fonts (I hope that you don't run Gimp as root?). Then just run fc-cache -v to update the font cache and restart Gimp.
If you haven't modified /etc/fonts/fonts.conf, the entry <dir>~/.fonts</dir> should be listed there and thus the users ~/.fonts directory will be searched for fonts.
Have a look at the Archlinux wiki as well:
http://wiki.archlinux.org/index.php/Fon … l_fonts.3F

How do install new fonts into photoshop?

Trying to add new fonts to my Photoshop. How do I do that?

That will depend on whether you have windows or a mac. Each OS has its own font folder, that is the location you need to install the fonts. The next time photoshop starts, it should see the new fonts.

I imported a new font into keynotes, but shows as Lucida Grande

Similar Messages

Maybe you are looking for