I inserted a burnt disc into my macbook pro and iTunes froze, had to shut down my mac in order to eject the disc. Is it not possible to transfer music from homemade cds onto my mac?
I inserted a burnt disc into my macbook pro and iTunes froze, had to shut down my mac in order to eject the disc. Is it not possible to transfer music from homemade cds onto my mac?
Yes, it is possible.
You had an issue in this individual instance.
Similar Messages
-
I inserted an SD card into my macbook pro and it didnt prompt me that a device was inserted so I took it out. Now the camera isnt showing anything on it. How do I fix this?
AFAIK cameras offer their own built-in format utility for inserted SD cards. You should use that. Otherwise, refer to the manual that came with your camera to determine precisely how your SD cards need to be formatted to work properly. Personally, I'd suggest Partition Scheme: MBR, and Filesystem: FAT32.
Try to limit the number of formats you perform on the SD cards, though, as you're reducing their lifespan. I believe formatting causes re-writes to a portion of the SD card that has fewer read/write cycles than the rest of the card as a whole. -
After installing Mavericks my MacBook Pro and my MacMini can't shut down, only a grey screen and finish. Must be killed by the power button. Why?
Nach der Installation von Mavericks kann ich weder das MacBook Pro (2 x 2.4 GHz) noch den MacMini (2 x 2.66 GHz) herunterfahren. Es bleibt ein dauerhafter grauer Bildschirm. Nach 20 min habe ich einen erzwungenen Neustart durchgeführt.
Ausserdem startet die Macs wesentlich langsamer als mit OS X 10.6.8.same here... sometimes it works, most of the time it doesn't!!
-
Can I insert a memory card into my Macbook Pro? I tried, and it does not go in on its own, I don't want to force it and get it stuck!! Help!
Maybe the wrong port or the wrong kind of memory card? You didn't say what version/year of Macbook Pro you have. Below is a photo of the newest one.
Red oval = USB port. It is to the left of the headphone jack.
Blue oval = SDXC card port. Is your card an SDXC card?
What are your options for transferring data to the picture frame? The manual should say. -
HT2801 I inserted a mini cd into my macbook pro cd slot and now i can't get it out. any suggestions?
I inserted a mini cd into my macbook pro cd slot and now i can't get it out. any suggestions?
If you can wrap some adhesive tape around a stiff business card and insert it inside and see if you can capture it. If possible, hold the MBP in a position where gravity is your ally.
You can open the MBP up, remove the optical drive and open it up or make an appointment at an Apple store genius bar and have them extract it.
Ciao. -
If i have Time Machine backed up on an external hard drive, do i just plug the drive into another macbook pro and all my stuff is in the new computer? Also, does it matter if the new computer is running Lion when the backed up info came from Snow Leopard 10.6.8?
No and Yes
Don't use TM for this purpose, clone your drive to an external, plug the external into another MBP and reboot from it. Please note that booting a machine that came with Lion may not be possible from a drive with Snow Leopard. -
Apple put a new hard drive into my MacBook Pro and updated it from Lion to Maverick. They did not put iPhoto and iWeb on it but I did have it in Lion. They also didn't put Pages, Keynote or Numbers back on it until I argued with them. Of course, I didn't have my data backed up. My hard drive was destroyed when I tried to install the update of Mavericks myself. I should not have to buy iWeb and iPhoto when I already had them. Suggestions?
cwhargrave,
have you tried looking in the App Store, to see if you can redownload iWeb and iPhoto there gratis?
If you haven’t done so already, you should purchase an external hard drive to act as a Time Machine backup destination, so that you’ll have an option to rollback to a working environment if a new OS installation is troublesome. -
My sister spoiled water into my macbook pro and the power went off in two seconds. I took off the cover and dried the water with tissues. Still it doesnt work. What do i do?
Do you mean when the water was spilled on it, it shut down? That would indicate a major internal short occured.
Really, I'd say you need to take it into Apple or an Apple authorized repair center and get it looked at. Odds are you've got a significantly damaged device that will require professional repair and parts replacement to get working again. -
I inadvertently downloaded MPlayerX into my Macbook Pro and wanted to remove it. I tried (1) jiggling the icon and there was no delete button, (2) dragging the icon to trash didn't work
1. Use free AdwareMedic to remove adware
http://www.adwaremedic.com/index.php
Install , open, and run it by clicking “Scan for Adware” button to remove adware.
Once done, quit AdwareMedic.
or
Remove the adware manually by following the “HowTo” from Apple.
http://support.apple.com/en-us/HT203987
2. Safari > Preferences > Extensions
Turn those off and relaunch Safari.
Turn those on one by one and test. -
I am trying to move music from my ipod onto my mac. When I locate the ipod under devices on my mac there is no music ! even though I can see it and play it when I use the ipod. So how can I transfer it ?
brianmartinwoolf wrote:
I am trying to move music from my ipod onto my mac. ...
Was this Music purchased in iTunes... If so... see here...
Transfer Purchases
File > Devices > Transfer Purchases
More Info Here > http://support.apple.com/kb/HT1848 -
I have a Macbook Pro and have just purchased a GSP hidden objects game. It says on the box that it is compatible and when I try and install it it tells me that installation has been successful. However, it then says that PowerPC games not supported. Help?
No game icon appears on my desktop and I don't know what I can do.
Really ****** off as i've not played these games since switching from a windows PC to a Mac and was really excited!! All I want is to be able to play my new game that arrived in the post today. If anyone can help I would be really really grateful....
The game says that it needs Mac OS X 10.3 or higher to run so I don't understand what the problem is or how I can fix it!!beckyj3,
the last version of Mac OS X which supported running PowerPC apps on Intel Macs was Mac OS X 10.6.8 (Snow Leopard). If you’d like to play this PowerPC game on your Intel MacBook Pro, then you’ll need to install Snow Leopard on it and boot into Snow Leopard. (Note that the last MacBook Pro which natively supported Snow Leopard was the Early 2011 model.)
The game was almost certainly published before Mac OS X 10.7 (Lion) was released, so back then, all versions of “Mac OS X 10.3 or higher” would have supported running that PowerPC game. -
Is it possible to transfer music from iTunes onto a SSD
Is it possible to transfer music from iTunes onto a SSD
SG
Bottom line: I am reporting on this one and clearly state that. So, is what the Adobe documents are saying about .wav non support in Premiere Elements Mac not true?
Details:
My replies to the originator of this thread about wav relate only to Mac in this thread asking about music in Premiere Elements Mac.
On this one I am reporting on what I have read in Adobe documents. And, I clearly state I am strictly an Elements Windows user.
Please note my comment
However, I did come across the following which suggests wav files can be played in Mac.
How to Play a WAV File on a MacBook | Chron.com
So, the question would be is there a difference between being able to playback wav in QuickTime multimedia player of a Mac versus
having Premiere Elements itself having no support for wav?
Since you are an Elements Mac user, could you respond to:
If the following is as you SG have written it here
WAV files work much more efficiently than any other audio format in both the Windows and Mac versions of Premiere Elements.
then why do the Adobe documents for Premiere Elements Supported Audio Import formats show wav as Windows Only?
Thank you for your Mac input on this.
Thank you.
ATR -
I have Macbook Pro and Adobe CC. 3D won't work.. I can open the 3D panel options but clicking ok or even choosing preview brings up an error message [can't]
My friend has exact same Mac and CC and he has the same problem. We both have up to date Yosemite and CC versions.
Any ideas?Hi,
Could you please confirm the CC application you are using.
It would be great if you post a screenshot of the problem.
Regards,
Sumit Singh -
I have a MacBook Pro and I recently installed OS X Yosemite 10.10.1. Since then the scanned documents from my canon mx450 appear black, even those that I have scanned before the installation. It works fine on other pc though. I tried re-installing the canon drivers but nothing changed. Please help.
zoiand wrote:
Since then the scanned documents from my canon mx450 appear black, even those that I have scanned before the installation.
This is very odd. Were the images that you scanned before installing Yosemite saved as JPEG? If yes, have you tried saving the scanned image as a TIFF?
Also, if you scan to a USB memory stick from the MX and save this as a JPEG, and then open the file on the Mac, does it also display as black? -
How do i transfer music from my pc to my mac?
How do I transfer music from my pc to my mac book pro?
There are different ways of transferring the songs, but as you just want to transfer songs, the best way is to use an external drive to transfer them to the Mac.
If you haven't got an external drive, get one. Then, connect it to your PC and copy all your songs to it.
After that, connect it to the Mac. To access to the external drive, open a Finder window and choose the external drive in the sidebar, under "Devices". Finally, you just have to put the songs in the folder you want, for example, Music
Maybe you are looking for
-
Selecting records based on formula fields
Post Author: Mike Kennedy CA Forum: Formula I have created a field (called "Shortage") that is the result of subtracting two running totals and have inserted all three fields into the group footer. I only want to select those records that have a neg
-
Changing values in drop-down dynamically
Hi All, We have created a report to display certain data using object oriented ALV. In the display, drop-down help is provided for one column. Now, I want to vary the values in the dropdown help depending on certain criteria. Is it possible? Thanks,
-
Hi, I am getting this warning message in the web dynpro screen while I am trying to run a particular method; Could not create JCOClientConnection for logical System: WD_MODELDATA_DEST - Model: class com.dow.dc.model.Model. Please assure that you have
-
Where to I place downloaded .action and .app files
Where do I place the automator action .action and .app files I download for installation. I noticed some load themselves auto into Automator whereas other need to be manually placed in a folder somewhere? Message was edited by: Todd Lichtenwalter1 Me
-
Hi, I would like to use a filter on my entity dimension for the publishing range instead of using "Top Entity".%All%" as Varykeys. Does anybody if this is possible? I tried to enter the filter inside the %% e.g %Prop="Prop value"% but that did not wo