I just downloaded the recent Maverick Software Update onto my Macbook Pro 15" and when the download/reset finished, my screen was completely black and I have not been able to get it back since. Help?
My computer had been wanting to do a software update, with what I believe was the Mavericks Software, for a few weeks but I had been putting it off. When I finally decided to install the update onto my Macbook Pro 15" today, my screen went completely black and I haven't been able to get it back since. The computer still turns on, I can tell because my caps lock key still glows when I press it and my volume buttons still make sounds when I press them. However, I cannot see anything on the screen. I don't even get the grey start up screen when I reset my computer. I have tried the SafeMode Restart where you hold Shift while it is restarting and the Display Reset in which you hold Command + Option (alt) + R + P until you hear the start up noise twice, and neither have worked. Any other advice on what I can do to get my screen back without having to send my computer away to be fixed?
Try a SMC reset:
http://support.apple.com/kb/ht3964
Ciao.
Similar Messages
-
I haven't been able to get the flash player working since upgrading to FF 7.0.1 on Debian Linux. I have followed the instructions in "How do I install the Flash plugin?" (https://support.mozilla.com/en-US/kb/installing-flash) multiple times.
As I said this has been an issue since the latest upgrade. I was able to get flash working in earlier versions. Flash works in the Debian "Iceweasel" version of FF.Thanks for the post, but no, that did not fix the problem.
I have located these directories:
/opt/firefox/plugins
/usr/lib/firefox/plugins
/usr/lib/mozilla/plugins
/usr/lib/mozilla-firefox/plugins
of course there is the /usr/lib/flashplugin-nonfree directory but that shouldn't matter for FF itself.
Still not working and I get this message on the "Check you plugins" page:
"For your safety, Firefox has disabled your outdated version of Flash. Please ''upgrade to the latest version.''"
The version on that page "Adobe Flash Player version 11.0.1.152
Your system: Linux 64-bit, Firefox" is the version I'm using. -
Each time I try to update applications etc. I get a message on my iphone that my Apple ID is disabled. Please help! Thank you.
Nenita1437 wrote:
...I get a message on my iphone that my Apple ID is disabled. ..
If disabled for Security Reasons... See here http://support.apple.com/kb/TS2446
If not for Security reasons...
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
I have not been able to get into Firefox since Tuesday evening
Asked a question about this a short while ago but when I click on the correct link in your answer e-mail it reports 'something is wrong' am getting VERY frustrated
what can you do to restore firefox apart from downloading it again?
-
My hard drive recently crashed and I had to have a new one installed, at the same time I upgraded to Yosemite since then I have not been able to get on my banks website to do any online banking. I just get a blank page after I log onto the bank. Any suggestions on how to fix this?
Using Safari? Safari/Preferences/Advanced - enable the Develop menu, then go there and Empty Caches. Quit/reopen Safari and test. Then try Safari/History/Show History and delete all history items. Quit/reopen Safari and test. You can also try try Safari/Clear History and Web Site Data. The down side is it clears all cookies.Doing this may cause some sites to no longer recognize your computer as one that has visited the web site.
Try another browser as a test.
Firefox -
Help! I have recently updated LR5 and before doing so I was able to email files to clients! (Very Convenient) Now my problem is I have not been able to get pass this error message reading "failed to send" which gives no further detail about what to do to rectify the situation. Someone please guide me through this! Thanks in advance!
Did this ever get resolved, as I am having the same issue. Trying to learn LR5 AFTER a decade using Aperture. I was able to set up a validated account but when I try to send an e-mail or photo I get the simple " Failed to Send " message. Using latest version of Mac OS X.
-
updating ios7 my iphone 4s has gone into restore mode and asking me to plug into itunes, im then getting an 3004 error. i have not been able to use my phone since doing this. can anyone help ?
http://lmgtfy.com/?q=iPhone+error+code+3004
-
As the title says.
I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?
I don't want to restart it because im scared that something might go wrong.
operating lionLimitLess- wrote:
Hi,
I had the power supply connected when I attempted it previously but even so my problem occurred. My rom is different and so I still need to update it.
Thanks
I wanted to mark your answer helpful too but I didn't know that I could only put it for 2 answers. Sorry
That was good advice by G-N and s/he is correct about it. Unfortunately, ASC allows only 2 "helpful" and 1 "correct" marks per thread. -
I just downloaded and installed elements 12 on my Windows 8 (yuck) notebook computer. When I log into Elements the program closes. I have not been able to get it to run. Any ideas?
Try a SMC reset:
http://support.apple.com/kb/ht3964
Ciao. -
After the lastest update on iTunes I have not been able to get into the program. I have uninstalled all components and reinstalled and now it is telling me I am missing .dll files. I am so frustrated. I probably lost my entire library except what I purchased
Your library should be safe.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
so I've downloaded a tv series from iTunes onto my macbook pro, for some reason the episodes on my iTunes won't play at all. no sound and no images. any suggestions and help?
Hi,
As you have match, I suggest that you create a new library by holding ctrl whist launching iTunes. Select create new library. Sign into iTunes Store and activate match. You will now have access to your music and will be able to stream your music.
Options : get a new external drive formatted for mac and either download music from match or copy music from old drive to new one. Alternatively you could reformat old drive and download music from match - I would not be comfortable using this option as it means erasing drive before being able to use with mac.
Jim -
Hi!
I purchased my AppleTV in Miami, but I live in Argentina.
I have not been able to get my device running correctly, and altough I've read tons of things online, I still have no solution to my problem.
Here's the thing: after everything's plugged in and ON, I see the Apple logo briefly, then the TV displays a sign that says no signal, check pwoer cords and power source.
But everything is plugged in and connected properly, otherwise, I doubt I'd be seeing the apple logo, right?
I tried changing the HDMI cable, reversing the ends, switching ports, hard resetting the ATV, and trying a different TV. No luck.
I read there is some issue with Samsung TVs, and most LED and LCD tvs down here are Samsung.
On the other hand, I cannot return it or exchange it, since I bought it in the states.
Oh! One of the tvs I tried it on displays a little sign that reads "connected at 1280x720 @60hz", and only THEN, goes to the "no signal" sign.
Please!!! I am being driven up the walls here.... HELP!!Try this:
Change the Apple TV resolution:
Press and hold the Menu and Up button on your Apple Remote for six seconds.
The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals.
Press Play on the Apple Remote to keep the current resolution or Select to manually cycle to the next resolution. -
Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
Firefox will not access the internet. I have used Firefox for years and the past week I have not been able to get on the internet??? What is the problem. My interent works as I get email and can iuse Internet Explorer to access
Which version of Firefox are you using?
See
* https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can -
I have not been able to get the built-in iPhone 4S keyboard dictation to work. I talk into it, then tap "Done", then the phone "thinks" for a few seconds (the purple dots pulse and I see the network icon on the top bar spinning) and then nothing happens.
Siri is wroking fineI am experiencing exactly the same problem, today, and a reset, of all settings, did nothing to correct it. Any suggestions would be welcome. While dictation in all apps is out, Siri is working fine also.
Maybe you are looking for
-
I was wondering can i install windows on my mac when i have downloaded windows form the internet and do not have a C.D.?? Because when i get to the part in Boot Camp Assistant that says Start Windows Installation it says u need a disc... is there no
-
Message split on adapter engine for the java based IDoc adapter
Hi Guys, Do you know if message split on adapter engine is available for the java based IDoc adapter on the single stack (PI 7.31)? I'm getting such exception when I try to post 3 IDocs Transmitting the message to endpoint <local> using connection Fi
-
Hi Experts ! I completed the closing procedure for a period in SAP B1. The system generated an opening balance for general and partner accounts. But when i look a partner balance, i have no details of the operations. Is it possible to seee such deta
-
Using Windows 7, I attempted to install an update for Itunes, when i returned to computer it gave this message ....Program cannot shut because MSVCR80.dll is missing from your computer. When I tried to open itunes it told me becuase of this error I n
-
SSRS's Mail subscription file format as XLSB
Dear All, I have a SSRS report, which execute hourly basis and send data in excel as an email attachment. I would like to attacheded excel file in .XLSB format. Please help. Virendra Yaduvanshi http://wikidba.wordpress.com/