I just installed a new Samsung 840 to my 2010 mac pro as a second hard drive. It is not showing up in my startup drive in system preferences
I have a 2010 Mac Pro with a 1TB HHD. I just installed and formatted a Samsung 840 Pro SSD. I want to install a clean copy of Mavericks to the SSD and have the computer boot up to it. How do I install Mavericks to the SSD? Also, the Samsung SSD does not show up as an option in Start up in system preferences. Please help!
What OS do you want to install? If you bought your MP early enough, it may have shipped with actual install discs, and you could use those. If it shipped with Lion or newer, you will have to follow one of the procedures mentioned by Niel.
You can get Mavericks from the App Store. Before you run the installer, copy (copy, not move) the whole "Install Mavericks" download to a backup location so that you can install it again if necessary. The installer in the Applications Folder will be deleted after installation is complete, so a copy is needed.
Similar Messages
-
I couldn't find an answer to this anywhere.
Will the lack of EFI prevent me from choosing which OS to boot into (due to no bootup screen)?
Does Apple have a workaround for this?
Also, is my Mac Pro (Quad; 4,1; 2009) compatible with the whole line of Geforce GTX, provided I have the "magic" drivers?
(I need to use OS X for music and 2D graphics (Pro Tools, Adobe), and the Windows side for game development with Oculus DK2)Thank you! Great advice.
I think I'm giving up on this, though. Only few card models are supported on the Mac Pro (with or without EFI firmware flash), and it's too much of a risk it won't even work at all if I don't buy the exact overpriced/outdated chipset supported. Apple hardware support is terrible, and information on workarounds to that lack of support are nonexistent. I wish I could make this work, but it's cheaper and easier to just get a cheap AMD with great graphics for all 3D/rendering projects. -
Mac Pro can't find hard drive with Snow Leopard installed on
Hello there,
I have a three harddrive setup.
Harddrive 1 is in bay 1 and has two partitions.
1: For system and apps
2: For Documents and stuff
Hard drive 2+3 are in Bay 2+3 and are combined to a RAID 0 drive.
Some time ago I installed Leopard and the brand new an formatted hard drive.
It happened that it always took 2 start ups to run Leopard because always on the first time it didn t find the system on hard drive one. Pushing the 'D' button often helped.
Of course that was nothing to work with, although I at least could get some work done, once I loaded Leopard successfully.
So I tried Disk Utility, fsck without success.
I also tried the way of using fdisk to mark the partion as active, which only resulted in now not being able to boot at all.
Booting from DVD I also tried choosing my Leopard install on my hard drive as boot device (it has always shown up here) but still without success.
I am afraid things are quite messed up, since there were a few things happening at one time, which I am not overly happy about now. (Installing new RAM, installing SNOW LEOPARD on the new harddrive 1 in bay one, having still the RAID with LEOPARD on in bays 2+3).
I am already certain to do a fresh and complete reinstall of the system, I have my backup, but still there is some iTunes music and a few documents I haven't backed up yet, which I'd rather would not like to lose...
Put it short:
What could I do to get my system running at least once?
Thanks a lot,
max.After some research I found out about the nice TargetDiskMode which I used to save all my important data with my MacBook.
http://support.apple.com/kb/HT1661
Ready to perform a complete and fresh install now!
Max. -
How can I force Time Machine to make a complete backup of my Hard Drive. I just installed a new external drive for Backup since my previous one failed. Now when I back up, Time Machine only backs up my data folder and the Users folder.
When I start a backup. Time Machine says "Oldest Backup: None; Latest Backup: None", so it seems like it should do a complete backup, but it only does a partial.Hi I'd like to jump in here. Your app showed me this:
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 749.3 GB Disk used: 453.81 GB
Destinations:
Plastic Wrapper [Local] (Last used)
Total size: 999.86 GB
Total number of backups: 64
Oldest backup: 2013-07-24 23:25:11 +0000
Last backup: 2013-11-17 01:40:47 +0000
Size of backup disk: Too small
Backup size 999.86 GB < (Disk used 453.81 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
/sbin excluded from backup!
/usr excluded from backup!
/System excluded from backup!
/bin excluded from backup!
/private excluded from backup!
/Library excluded from backup!
/Applications excluded from backup!
Aside from the size of my backup drive, which I will increase at some point, I'd really like to have time machine backing up all system folders, especially Applications. How to I reset this hidden exclusions?
Thanks,
Darcy -
I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
If anyone has any suggestions I would be happy to hear them.
I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
Anyone?Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
I have my suspiscions about the drive but any help would be appreciated. -
I had iLife pre-installed on my aluminium Macbook 2009 with OSX Leopard on it. My hard drive broke but got most of the info off it and just installed snow Leopard on to a new drive and then downloaded and installed Mountain Lion over it. Now I don't have iLife anymore. How do I get it back?
Welcome to Apple Support Communities
Mac OS X doesn't come with iLife applications, so you have to install them manually after installing Mac OS X.
Insert the Applications disc or Mac OS X Install Disc 2 DVD and install iLfe applications. Then, open > Software Update, and install the latest update. If you want, you can purchase iMovie, GarageBand and iPhoto in the App Store, so you will get the most recent version -
I just bought a new Samsung 22" monitor. The text resolution is really bad. After talking to Samsung, I found that the needed resolution is higher then what my Mini-Mac shows available. Can this be fixed or do I return the monitor?
Let's try again...
my cable goes from the "Thunderball" port on my mini with an adaptor to convert it to the regular cable
You mean the Thunderbolt port.
What Mac mini do you have? Apple menu > About This Mac.
What Samsung monitor do you have?
What cables are you using?
Have you tried holding Option and click the Scaled resolutions button in System prefs > Displays? -
my itunes wont work I just installed some new update and now it wont even come up, I click the Itunes icon and nothing happens. Please help me I've tried uninstalling it and downloading it again but that didnt help :/
DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....
-
Just installed a new airpot extreme with a modem to use as a wireless system. Setup was successful however with 3 iPads and one laptop we cannot get all devices access to Internet. Each reset of airport extreme results in a different combination of devices that successfully connect. Any ideas as to why?
Well, this is interesting,
Let me tell you coulpe of things I noticed:
- Are you using LEAP as the EAP method? some config examples illustrate configuriong using LEAP with WEP keys. Forget this and use WPA2-AES.
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c40b6.shtml
- in some AP configurations (AP1 for example) I can see that:
wlccp authentication-server client any method_Users
This means that the wlccp client authentication will use the method called method_Users. Let us see what is configured with this method:
aaa authentication login method_Users group Users
This shows us that the method method_Users uses the server group named Users.
let us see what is configured withe the group Users:
aaa group server radius Users
NOTHING!! it is empty!! so when a client tries to connect it will try to autheticate it against the radius server but the radius server group that it needs to check is empty.
so I think you need to either use the correct method under which the server is configured with the wlccp statement. OR you need to configure the method_Users with correct user group that contains a server.
Check and let me know if that works.
Regards,
Amjad -
Hi i have a white screen problem with my macbookpro mid2009 15".I installed a ifixit battery and i think it screwed up one owc ssd drive.I just installed a new one and at 13min battery left it shut down and then all i got was a white screen...I tried every feasible command and all i got was some more white lol.I dont have my tools to open the case right now but do you guys think my cpu board is done?
Have a look at this help document for suggestions that you haven't tried yet:
http://support.apple.com/kb/TS2570 -
I just installed the new mountain lion software on my iMac. I was currently running Snow Leopard. My problem is with my mouse. Now when I scroll down the page it moves in the opposite direction. In system preferences I tried checking and unchecking Natural for scroll feature. Movement from side to side works fine. Has anyone experienced this problem?
I think this new scrolling behaviour was introduced with Lion. You do get used to it pretty quickly (well I did). Are you sure that deselecting Natural Scrolling in Mouse Prefs doesn't re-instate the previous behaviour, it does here.
-
Question
I just installed the new firefox for Mac OSX 10.6.8 and when I select an image on a site (right click and copy) and paste in Photoshop 5.5, the image lightens. It does not do this in Safari.Firefox, Safari, and PhotoShop each handle embedded color profiles differently. For an add-on that makes it easier to experiment with Firefox's color management options, you might be interested in: [https://addons.mozilla.org/en-US/firefox/addon/color-management/ Color Management :: Add-ons for Firefox]. I haven't tried it myself.
-
I just installed Snow Leopard 10.6 on my 2007 Mac Probook. I need to upgrade my safari or install a newer version. How do I do this? I can't find any installation links.
Thank you for your response. I downloaded Safari 5.1.7. I don't know if I was successful because the system requirements called for 10.6.8, and I recently downloaded Snow Leopard 10.6.3
-
I have just just installed a new version of itunes. When i tried to run the new version it came up with the message "The file ituneslibrary.itl cannot be read because it was created by newer version of itunes.
I installed the new version because itunes had not recognised my ipod nano 5G, and told me to reinstall. Itunes selected which version to install, so I don't understand what is going on. To add insult to injury it installed a pile of malware which I am still trying to get rid off.
Any advice would be helpfulHello Davedamoclese,
Go through the below link to Remove iTunes and all its components from your computer first and then Re-install fresh copy of iTunes on your computer.
http://support.apple.com/kb/HT1923
Note : DO not delete iTunes Library as it contains all your iTunes data, please go through the below link for where it is saved on your computer :
http://support.apple.com/kb/ht1391
You can download the latest version of iTunes from the below link :
http://www.apple.com/itunes/download/ -
hi as above ive just installed the new itunes and it wont read the data on my phone
Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Device Not Recognised
For PC > http://support.apple.com/kb/TS1538
For Mac > http://support.apple.com/kb/ts1591
Maybe you are looking for
-
Opera 12.16 (build 1860) Windows 7 Pro (64 bit) SEVEN times ADOBE has asked me to install the latest version of Flash Player. SEVEN times I have installed the latest version of Flash Player. SEVEN times I have checked to see if it in the Plugins list
-
Tips on analysing a SD report.
Hy guys,can u please tell some useful tips to analyse a report.
-
Sarari icon shows but when I click on it with the mouse a question mark appears and it won't open
The safari icon shows but when I click on it to open a questionmark appears and safari will not open?
-
Hi Master, I have uploaded datas into SAP regarding to organizational structure (O,S;C,P,K). The problem is the it1hasn´t been updated neither with the cost centers, nor positions nor jobs. Let me give you some table (T77s0) details. PLOGI ORGA x PL
-
Ksh. Integer value splitted into two parts
Hi , I have code like below in my Ksh script, and getting the sample_id value as '2003 15588' instead of '200315588' I'm using this sample_id to run an oracle report. Any help on why the value is getting splitted into two parts like 2003 15588. if ((