I just loaded a few more songs and now it shuts off in the middle of the new songs on

Tried deleteing and reloading but it still does it only on those new ones. I had downloaded software updates prior to loading these new songs. What do I need to do to correct this? And how do you reload firmware which I am reading a lot about?

This is the Zen Nano Plus. Forgot that in first msg.

Similar Messages

I just loaded Yosemite on my Mac and now adobe flash won't work in Safari 8.0.4 . Does anyone have a solution ?

I just loaded Yosemite on my Mac and now adobe flash won't work in Safari 8.0.4 . Does anyone have a solution ?

If you can't install or update Flash, follow these instructions.
If you have installed the latest version of Flash, please take each of the following steps that you haven't already tried. After each step, relaunch Safari and test.
For a "blocked plug-in" error, see Step 4.
For a "missing plug-in" error, start with Step 8.
Back up all data before making any changes.
Step 1
You might have to log out or restart the computer before a Flash update takes effect.
Step 2
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
           ▹ System Preferences… ▹ Flash Player ▹ Advanced ▹ Delete All...
In the sheet that opens, check the box marked
          Delete All Site Data and Settings
then click Delete Data. Close the preference pane.
Step 3
If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 4
a. If you get a warning of a "blocked" or "outdated" plug-in, then select the Security tab in the Safari preferences window. In the list of plugins on the left, there should be one—and only one—entry for "Adobe Flash Player," showing the same version number that you installed. Select that entry. On the right there will be a list of websites for which you have specifically allowed Flash, if any. It's normal for the list to be empty. Below that is a menu labeled
          When visiting other websites
From that menu, select either Allow or Ask.
b. If you still get the alerts, then go back to the Flash Player preference pane and select the Advanced tab. Click Check Now. Quit and relaunch the browser.
c. If the alerts still persist, triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
Right-click or control-click the highlighted text and select
          Services ▹ Open
from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 5
In the Safari preferences window, select the Advanced tab and uncheck the box marked
          Stop plug-ins to save power
Step 6
Open this folder as in Step 4:
/Library/Internet Plug-Ins
Delete the following item, or anything with a similar name, if present:
          Flash Player (failing).plugin
You may be prompted for your login password.
Step 7
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 8
If you get a "missing plug-in" error, select
          Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
          Allow (or Enable) plug-ins
Then click the button marked
          Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 9
Select
          Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.

I just upgraded to OS X Lion and now I can't open the application Adobe ImageReady CS because PowerPC applications are no longer supported. Is there anything I can do to fix this?

I just upgraded to OS X Lion and now I can't open the application Adobe ImageReady CS because PowerPC applications are no longer supported. Is there anything I can do to fix this?

There is no fix. It simply means that the software is outdated. Adobe would need to release a newer non-PPC version that supports Lion. They may have done that already, I don't know.

Please, I need help. I´ve just downloaded your adobe creative cloud and now I CAN´T SEE THE DESKK ON MY PC!!!!!

Please, I need help. I´ve just downloaded your adobe creative cloud and now I CAN´T SEE THE DESKK ON MY PC!!!!!

Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

I just changed my password in youtube account and now it is not recognizing the new password can someone help?

I just changed my password in youtube account and now it is not recognizing the new password can someone help?

Well, mobile me was elimated over the summer.
http://www.apple.com/support/mobileme/

During the io 5 update process, my iphone 3gs froze and now will shut off and turn on by itself, and will not allow me to unlock the phone or do anything with it. how do i fix this?

during the io 5 update process, my iphone 3gs froze and now will shut off and turn on by itself, and will not allow me to unlock the phone or do anything with it. how do i fix this?

Follow the instructions here > http://support.apple.com/kb/HT1808
You may need to try a few times to get it to work

I was downloading the latest iTunes and my computer shut off in the middle and now my phone is displaying that it needs to connect to iTunes. iTunes says my phone needs to be restored before it will work with iTunes. HOw do i avoid restoring?

I was downloading the latest iTunes and my computer shut off in the middle and now my phone is displaying that i need to connect to iTunes and iTunes is telling me that i need to restore my phone before it will work. I have pics that i have not uploaded yet, how do i get around this without restoring my phone? Thanks,

I have the exact same issue. I havent found our what is causing it either. Multaple re-install attempts with no success. I have to use Windows Media Center to burn audio discs. Any other advice?

TS3682 I backed up my ipad to the cloud as it had a broken screen so I swaped it out for a new one and now I cant restore because the new Ipad has IOS 6 and my back up is 6.1! This is what I get for buying an Ipad twice in a week because of a broken scre

I backed up my ipad to the cloud as it had a broken screen so I swaped it out for a new one and now I cant restore because the new Ipad has IOS 6 and my back up is 6.1! This is what I get for buying an Ipad twice in a week because of a broken screen? $500 the first buy and then another $299 plus tax for the swaped out one that I can't restore with my backup data.

I assume that you will have to set up as new since it will not let you restore from the backup. Then after you set it up, you can restore from the iCloud backup. The backup should not disappear be use you are setting this device up as new. Your backup should still be in iCloud.
However, after you activate the iPd and update the software, you will have to erase the device in order to restore from the Cloud backup, that is the only way to get to the iCloud backup.
Copied from the article that linked you to this discussion ....
Resolution
Update your device to the latest version of iOS to be able to restore the backup.

I was upgrading my ipod touch and my computer shut off int he middle of it upgrading. its stuck on a screen showing the apple and a loading bar below it. I cant turn it off, it wont let me. and the bar that usually appears in itunes isnt there.

my ipod was upgrading and my computer turned off in the middle. its stuck on a scrren showing an apple and a loading bar beneath it. i cant get it to turn off and the bar that usually shows up in itunes isnt there. how do i get it off this screen so i can use it?

did you try to sync your iPod again?

HT201263 While doing the restore the connect to Itunes image is still on my phone and has not shut off? The Itunes "status" area now says "Processing File" and has said this for 15 mintues with no change. What do I do??? This is the second Restore I've a

While doing the Restore the "connect to Itunes Image is still on my phone and has not shut off or changed since starting the REstore. Now Itunes status bar says "Processing File" but has not changed or done anything for 15+ minutes. What do I need to do? Let it go or is it not working???? FYI, I tried to update to the 6.0.1 (I believe thats this update)

This was the third Restore I've attempted today.... 'm not sure what all I did including unplugging and plugging it back in, and messing with tryign to select my phone vs. my husbands but it starting moving again. It's now attempting to "back up" from ICloud... we'll see. Thanks

Just loaded latest version of itunes and now it won't open I get the following error message MSVCR80.d11 missing and error 7 windows error 126, can anybody help

Just loaded latest iTunes update and now it won't open i get a message eror MSVCR80.d11 followed by error 7 Windows error 126, anybody help?

Hi Jeff,
see for your problem:
http://pcsupport.about.com/od/findbyerrormessage/a/msvcr80-dll-not-found-missing -error.htm
it worked for me.
Grtz

I just loaded Lion oxs 10.71 and now my Logic 9 software wont show up it says its not compatible also i cant find my macintosh harddrive icon that is usually shown on dektop and device browser column can anyone help me with this problem

I just loaded Lion oxs 10.71 on my I-mac computer, and now my Logic 9 software wont show up it says its not compatible also i cant find my macintosh harddrive icon that is usually shown on dektop and device browser column can anyone help me with this problem.

Mike,
I had a similar issue with Photoshop when I upgraded to both Snow Leopard and Lion. it turned out to be Rosetta is no longer present in the newer OS. Once I upgraded to Lion, Appleworks stopped working after all these years.

A few more approvals and now off to the garden I go.

My scores have gone up a little and I was looking into adding a few more accounts to round out my profile but didn't really want the HP so I figured I would try the shopping cart trick. I only app'd for stores I would shop at! HSN $1000 - So excited for a SP!!J-Crew $250- I heard this can grow fast. When do I hit the love button?Venus $250

Congrats! For me, J Crew has been at $250 since my start date in Jan of this year.

While restarting during for Win10 istallation, pc overheated, and now it shuts off at boot up

Out of nowhere my pc stopped working during start ups. I was installing Windows 10, and when it was restarting to finish the process of installing, my pc overheated. I put my hot computer next to the A/C because it kept on overheating when I tried to turn it back on. After my pc cooled down I turned it back on, and after 70 seconds it just shut off (it had a broken screen so I didn't know what was going on). Please someone help me, my pc won't go to select a OS and I can't see what is going on. HALP

Sudden shutdowns can occcur from the Intel CPU overheating and executing a Thermal Halt, the CPU temperature will confirm this and if the system stays up longer after allowed to set off for hours to cool off but stays on for shorter periods at subsequent reboots then the cause is likely an improperly attached heatsink when you replaced the fan assembly. I hope you used thermal putty when replacing your fan and apply it properly this time,,,, if you didn't use thermal putty the problem and solution is evident. Either do a better job this time and if you have no idea what thermal putty is then pay someone qualified to reinstall your fan.
Using TPFancontrol or Notebook Hardware Control will report your CPU temp also enabling granular fan control.
I prefer TPFancontrol for its simplicity and accurate temp reporting, use it to monitor your CPU temp to verify your CPU isn't baking and shutting down to preserve itself.
AMD's are notorious for running hot to match Intel speeds and WILL toast themselves more often than Intel.
Moderator note; inappropriate comment removed
Don't just sit there, take a second and use the Kudo's button to compliment the people who help you.

While restarting for Win10 istallation, pc overheated, and now it shuts off at boot up

Out of nowhere my pc stopped working during start ups. I was installing Windows 10, and when it was restarting to finish the process of installing, my pc overheated. I put my hot computer next to the A/C because it kept on overheating when I tried to turn it back on. After my pc cooled down I turned it back on, and after 70 seconds it just shut off (it had a broken screen so I didn't know what was going on). Please someone help me, my pc won't go to select a OS and I can't see what is going on. HALP Thank you if you can help John Tall

Sudden shutdowns can occcur from the Intel CPU overheating and executing a Thermal Halt, the CPU temperature will confirm this and if the system stays up longer after allowed to set off for hours to cool off but stays on for shorter periods at subsequent reboots then the cause is likely an improperly attached heatsink when you replaced the fan assembly. I hope you used thermal putty when replacing your fan and apply it properly this time,,,, if you didn't use thermal putty the problem and solution is evident. Either do a better job this time and if you have no idea what thermal putty is then pay someone qualified to reinstall your fan.
Using TPFancontrol or Notebook Hardware Control will report your CPU temp also enabling granular fan control.
I prefer TPFancontrol for its simplicity and accurate temp reporting, use it to monitor your CPU temp to verify your CPU isn't baking and shutting down to preserve itself.
AMD's are notorious for running hot to match Intel speeds and WILL toast themselves more often than Intel.
Moderator note; inappropriate comment removed
Don't just sit there, take a second and use the Kudo's button to compliment the people who help you.

I just loaded a few more songs and now it shuts off in the middle of the new songs on

Similar Messages

Maybe you are looking for