I just purchased logic studio. After making my guitar tracks, I then configured for my axiom controller, now I can get any plugged in guitar sounds to work (plugging them in to m-audio 610. What am I doing wrong.

Trying too get my guitar plugged in to m-audio 610 to work again. It has not worked since I configured my axiom controller. What do I need to do?

Similar Messages

Just purchased Logic Studio Academic Version off ebay. serial code is invalid. HELP!!!!

I just purchased Logic Studio (academic version) off ebay. It was only 200$. When i received it, it was factory sealed and everything, and had the serial number. However, when I entered the number it consistently gave me the "serial number is invalid". I know its not any problems with how I entered the code, because I checked all my 0's and O's and 1's and L's. I also entered it about 30 times. I'm kind of freaking out. Any suggestions on how to fix this problem? Or am i just screwed?....

You could call AppleCare or Customer Support...
You may find something in these Links:
Logic FAQ
http://support.apple.com/kb/HT4384
http://www.apple.com/education/how-to-buy/
https://discussions.apple.com/thread/1319062?start=0&tstart=0

When I try to record audio with Soundflower, the recording has no audio. What am I doing wrong?

I am an amateur DJ trying to record a mix made in Cross DJ. I followed a tutorial instructing me to use Soundflower to route my system audio to QuickTime and have had no problem routing. Yet when I record the audio with QuickTime, the recording plays no audio. What am I doing wrong? I really need this mix recorded and I have no intention of downloading extra software.

This is because you have Punch on the fly enabled under Options (top menu)>Audio>Punch on the Fly.... signified by the letter P instead of the letter R

HT201359 I redeemed a 25 dlls gift card to buy a single song that cost 1.29. Now I want to buy another one and it tells me that I already redeemed that code. What am I doing wrong?

I redeemed a 25 dlls gift card to buy a single song that cost 1.29. Now I want to buy another one and it tells me that I already redeemed that code. What am I doing wrong?

Please try the following steps,
1) Visit the My Apple ID website at:
http://appleid.apple.com
2) If the site is not displayed in your preferred language, click the Change Language link in the upper-right corner, type the name of your language in the field that appears, then click the Save button.
3) Click the "Manage your account" link.
4) Type your iTunes Store account name (which is your Apple ID) in the Apple ID field, type your password in the password field, then click the Sign In button.
5) Click "Addresses" in the column on the left. If you have multiple shipping addresses, remove any out-of-date or duplicate addresses by clicking Delete. Also, make sure the state or province field is filled out correctly for each address. To edit an address, click Edit. Edit all of your shipping addresses and make sure the appropriate state is selected in the State drop-down menus.
6) Now click "Phone Numbers" on the left. The area codes should be in the area code fields and the phone numbers should be in the phone number fields. If an area code is missing, or if it is in a phone number field, your account information may not save properly.
7) Make any other necessary corrections, then click the Save Changes button.
8) Click Log out in the upper-right corner.
When you make your next purchase on the iTunes Store, you will be asked to review your billing information. At this point, you can change your information or simply click Done at the bottom of the screen to proceed. Once you click Done, you should be able to purchase on the iTunes Store using your store credit.

HT5313 .tried to install lion 10.7, tell me can't install on this drive----but it's the boot drive that boots this computer, what am I doing wrong?

tried to install lion 10.7, tell me can't install on this drive----but it's the boot drive that boots this computer, what am I doing wrong?

dsharp14 wrote:
tried to install lion 10.7, tell me can't install on this drive----but it's the boot drive that boots this computer, what am I doing wrong?
What are the specs on your Mac? Top Left Apple Symbol > About This Mac > More Info > Hardware Overview
Thanks
Pete

When I download from my samsung camera, the photos do not go to the "photos" file. I have to download to "import" then copy them to a separate album. what am I doing wrong?are

when I download from my samsung camera, the photos do not go to the "photos" file. I have to download to "import" then copy them to a separate album. what am I doing wrong?are

Is iPhoto open when you connect the camera and are you seeing the camera in iPhoto?
If not then describe in detail how you're going about trying to import photos from your Samsung camer into your iPhoto Library. From what you've described we have no idea what's going on.
And where is this "import" folder located that you're referring to?
OT

Real newbie-I can hear my loops in my library, but when I drag them to a track, there is no audio. What am I doing wrong?

Real newbie question-I can hear the loops in my library, but when I drag them to a track, there is no audio when I playback or record. What am I doing wrong?

You probably put Midi loops (green) on audio tracks, and audio loops (blue) on Midi tracks.
That won´t play.
JanD

My ipad2 I just got today can't seem to recognize the net. I do have the wifi turned on. What am I doing wrong?

I just received my ipad2 today, and did all the sync routine. The wifi is working, but I can't seem to access the net. I get an error message stating "Cannot open page, Safari cannot open the page because it is not connected to the Internet." What am I doing wrong?

Tap Settings in the Home screen then tap General / Reset / Reset Network Settings.
Then restart the iPad. Press and hold down the Sleep / Wake button until you see the red slider then swipe to the right to power off, then hold down the Sleep / Wake button until you see the Apple logo.
If that didn't help, try the iPad Wi Fi help here.

My Volume Limit restriction won't work.. It's still too loud, what am I doing wrong?

As the header says... I've followed what the manual says, but I still can't get the volume to get any lower.. My daughter have played music on it, and it sounds like the speakers are gone soon... So I really want the volume limit to work, before the entire iPod touch is broken...
Can Anyone please help me ASAP?

A. The Volume Limit setting lets you change the maximum output of your iPod’s headphone jack. The actual sound pressure level that you experience depends on several factors: the music you’re listening to, how it was recorded and encoded, the type of earbuds or headphones you use, and their placement in your ears.
Above from:
here
Note it does not effect the internal speaker

Hi. I've added a new page to my iWeb '08 version 2.0.4 website but can't seem to select the top menu pages to make a rollover color change. I can select them on the original pages. What am I doing wrong?

Hi. I've added a new page to my iWeb '08 version 2.0.4 website, but can't seem to select the top menu items to make a rollover color change. I can select them on the original pages. What am I forgetting to do?

Old Toad has a tutorial about changing the colors in the iWeb default menu...
http://oldtoadstutorials.net/No.24.html
If you want your website to be found by search engines you would be better to follow Ethmoid's suggestion of creating your own navigation...
http://www.iwebformusicians.com/iWeb/Navigation.html

I have a Mac Pro (Mid 2010) I just purchased Apollo Twin but discovered that I don't have a Thunderbolt port, is there anyway I can get round this?

I have a Mac Pro (Mid 2010) I just purchased Apollo Twin and discovered I do not have a Thunderbolt port, how can I get around this?

To use ANY ThunderBolt devices, a Mac must have left the factory with a ThunderBolt port. There are no known workarounds.
Intel holds the patents and controls the chips, and they have shown NO INTEREST in any other solutions.

TS3999 my entries typed on my iphone do not transfer to the ipad calender but works from the ipad to the iphone. what am i doing wrong?

help, when i create a new event on my Iphone4 calendar it does not show up on my Ipad. It does work from the Ipad to the Iphone4. I am using Icloud and Icloud backup.

Hi there LovelyLily,
You may find the troubleshooting steps in the article below helpful.
Resolve issues with an over-the-air iOS update
Not enough space to update
If your device doesn't have enough space to download and install the update, you can use iTunes to update your device.
-Griff W.

Im trying to hook up atv but the instructions say to select input and I cant get that far. I have plugged in the hdmi cable and the power cable and nothing happens. What am I doing wrong?

I am working with a hotspot only and maybe thats the problem?

Is this a cable modem? It has to be off for at least 20min and sometimes much longer before it will give up the old settings. You might even need to power down the cable modem overnight.
Tell us exactly what broadband you have with what ISP and exact model of modem..
The new TC cannot be setup without using the latest airport utility 6.3.1 or 6.3.2 and you need Lion - Mavericks to use it.
The computer also needs to have ipv6 setup to local link on whatever you are connecting with, wireless or ethernet.

Help. New iPhone 4. Can't find it on my Itunes. The sidebar no longer recognizes my devices? What am I doing wrong? I am still a new MAC user....

WHere is my device located on my Itunes? I have a new device, it is recognized but I can't take music or movies and move them to the device because I can't "see" it??

Top right hand corner. Should be a button that says "Blarebees's iPhone" or whatever your phone is called.
Click that button. Then you can browse your phone an sync all your stuff.
If it doesn't show anything about an iPhone, then thats a bit weird. Phone a friend.

TS1741 I have my ipad2 playing music to my Apple TV. But can't get photos or videos that I took from my photo library to the tv. What am I doing wrong? Thanks for any help..

I have an ipad2 and iPhone 4. Trying to get photos and videos from the ipad2 to apple tv. My music is playing fine on the tv, but how do I get the photos and video onto the tv? Thanks

Welcome to the Apple Community.
Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
When displaying the content you wish to mirror on the iPad 2, iPad 3 or iPhone 4s, double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.

I just purchased logic studio. After making my guitar tracks, I then configured for my axiom controller, now I can get any plugged in guitar sounds to work (plugging them in to m-audio 610. What am I doing wrong.

Similar Messages

Maybe you are looking for