Im trying to hook up atv but the instructions say to select input and I cant get that far. I have plugged in the hdmi cable and the power cable and nothing happens. What am I doing wrong?
I am working with a hotspot only and maybe thats the problem?
Is this a cable modem? It has to be off for at least 20min and sometimes much longer before it will give up the old settings. You might even need to power down the cable modem overnight.
Tell us exactly what broadband you have with what ISP and exact model of modem..
The new TC cannot be setup without using the latest airport utility 6.3.1 or 6.3.2 and you need Lion - Mavericks to use it.
The computer also needs to have ipv6 setup to local link on whatever you are connecting with, wireless or ethernet.
Similar Messages
-
Hi, I'm a new Mac user and I want 10.8.2 but i can't get that unless I have i have 10.8.1 and I cant get that unless I have 10.8. Now I was wondering if anyone could provide me with a link that would allow me to download this version?
Again, that's not a problem - if you purchase Mountain Lion through the App Store, it's been updated to 10.8.2 - and when there are other updates available, you can just download and install them as well.
Just go to the App Store and purchase and install ML. Then run Software Update (Apple menu) to see if there are any updates available for your machine. I keep my System Preferences>Software Update prefs set to check automatically -
Some people would rather check manually. No big deal, just buy it and install it.
Clinton -
I cannot find the Messages app on my mac. I searched my Finder and the App Store and still nothing. What am I doing wrong?
What version of OS X do you have? Messages requires 10.8. Previously it was iChat (but does not have iMessage capability to send texts to an iOS device).
Matt -
when I download from my samsung camera, the photos do not go to the "photos" file. I have to download to "import" then copy them to a separate album. what am I doing wrong?are
Is iPhoto open when you connect the camera and are you seeing the camera in iPhoto?
If not then describe in detail how you're going about trying to import photos from your Samsung camer into your iPhoto Library. From what you've described we have no idea what's going on.
And where is this "import" folder located that you're referring to?
OT -
My iPhone 4 says I have 4.9 GB of my free 5 GB iCloud storage available, but when I try to back up the phone to iCloud I get the message that I do not have enough storage to back up this device. What am I doing wrong??
Import them to your computer as discussed here: http://support.apple.com/kb/HT4083, then either delete them from your phone or exclude the camera roll from your iCloud backup by going to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your phone under Backups, then turn Camera Roll to Off under Backup Options.
Also check Settings>General>Usage to see how much availble space is on your phone. If you have to delete apps in order to take photos, you may be out of space on your phone. If so, you need to delete something in order to create more space. -
When I charge my IPod Touch and don't use it for 2-3 days, it is dead when I go to use it. What am I doing wrong?
If yo are oly letting the iPod sleep (vice slide to power off) that is normal if wifi and other itesm ae left on when sleep. I would either power the iPod off or at least turn on airplane mode and let it sleep.
-
I cant get my iphone (5) or ipad (1) to recognize or find the apple tv on my apple tv app.
you mean the remote app ?
if so then
tried reading this ?
http://support.apple.com/kb/HT1947 -
I cannot get a click when putting in the memory. It clicks when I pull it out. Am I doing something wrong?
Is it for sure the proper Memory?
Does it look all the way in, even/level with existing RAM? -
I have downloaded LR CC from my CC account that is paid for. when i click on the icon to open it, it flashes as if it wants to open but then doesnt open. do I need to completely remove LR 5 from my imac? I still have projects I am working on and would like to be able to keep it if possible
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal. -
I would love to see my photos from my iPad on my Samsung tv. Purchased necessary connectors from from apple store (hdmi ect) set the proper source on tv -- nothing. What am I doing wrong?
Hello Jogindra,
Welcome to the Apple Support Communities. If you are having issues with AirPlay, here is an article on troubleshooting the issue. It goes into not seeing the icon and performance issues.
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Regards,
-Norm G. -
Filesharing w/ two Dual 2.5 G5s using eithernet: What am I doing wrong?
Hello everyone.
I'm trying to setup a computer-to-computer ethernet connection between two Dual 2.5Ghz G5's, both running OS 10.4.6, however I am running into problems. I've never done this before, so I may be missing something very simple, so please bare with me.
I've followed the mac help file for setting up ethernet connections, but whenever I pushed "browse" neither computer would show up. Thus my search for answers turned online, and found instructions stating that I should see something like this, 'Other Macintosh users can access your computer at afp://xxx.xxx.x.xxx/"
I see this number for one G5 (right under the "service box") but there is no such number on the other G5. What caused this to happen?
And once again, when I choose "browse for computer name" it never connects to a different computer, regardless of which computer I start from.
I know my ethernet cables are good (I used them at school to connect to the internet), and according to many posts I've found, I do not need a special "crossover" cable as these macs are fairly new.
What am I doing wrong?
Thanks in advance for your help and reply.
Dual 2.5GHz G5 Mac OS X (10.4.5) 5Gb Ram, Logic 7.1.1 and other goodiesThree digits aren't necessary for a valid IP address. An IP in the form of x.x.x.x would be valid. The problem probably lies in the combination of IP address and subnet mask.
With the IP formats you have now, unless both of those IP addresses have corresponding subnet masks of 255.255.0.0, they won't be able to see each other.
It may be easiest to switch the built-in ethernet to obtain an address manually rather than letting OS X set a self-assigned address as it's doing now. If you were to set one machine with an IP of 192.168.0.2 and the other as 192.168.0.3, both with a subnet of 255.255.255.0, they should be able to see each other. -
IIce updated my credit card info. i have credits in my itune account, yet I can't buy anything. What am I doing wrong?
Have you tried going to Settings>iTunes & App Store, and signing out? Click on your Apple ID, then on Sign Out. Then sign back in again and try again.
Also, make sure you have closed the app: double-click the Home key and swipe up on it to close it. Then try again.
Cheers,
GB -
In Photoshop Elements 11 attempting to blend two photos (layering one on another) I click on brush and get a smart brush which doesn't do what the instructions say it will do. I can get the eraser to do what I want. Why the confusion???
I click on brush and get a smart brush which doesn't do what the instructions say it will do.
The Brush tool (Keyboard B) has several different brushes in the same slot. Right click on the brush icon and you will see them, or press B sequentially.
The Smart Brush tool (Keyboard F) has two items in the slot.
Since you did not provide reference to "the instructions", it is difficult to remedy the "confusion." that exists.
I suspect that the recipe calls for a mask, and painting with a black brush to mask out certain areas.
It would help if you post the instructions and what your goal is with more specificity. -
I am trying to watch movies from my macbook pro (2010) on my new vizio tv. I connected the minidisplayport to HDMI cable (bought from the apple store) and switched the input to the right input but nothing happens. What am I doing wrong?
Hi T,
Open Sys Prefs > Displays and check the settings there. -
I'm trying to sync a 4s so that it can be activated w ATT...my computer says that I need to have 11.1 or higher in order to do that but when I download from the itunes site nothing happens and I still can't sync phone...what am I doing wrong?
The screen that says "Download Now" also shows the proposed iTunes version number (in the box below):
Be sure it indicates 11.1.3.
If it is, here's further troubleshooting:
http://support.apple.com/kb/TS1538
Maybe you are looking for
-
Error in uploading data from DSO to Infocube in 3.5(rsa1old)
While uploading data from DSO to Infocube, I selected Initial update option In schedule tab when I clicked start, an error occured it says: Delete init request REQU_D4YTAGX8PEOUQJLSKOEPH9EV before running init. again with same selection. Can anyone l
-
Shared Folder, Permissions, Result Code -5000
I've put a Logic 7.2.3 (961.9) file into the Shared Folder for a friend to also work on. I've adjusted the permissions of the file to read and write in all available areas. As my friend accesses the file from the Shared Folder, from his account, and
-
Long time for export panel to appear
hi hop you can help me! I have 1.5 aperture and the last few times ive used it it has taken over a minute or more for the export panel to appear when exporting a version. I have also downloaded and tried the aperture 2 trial and the same thing is hap
-
What happened to Java2 SDK 1.4.0-beta3?
I have Java2 SDK 1.4.0-beta3 on my computer. I was going to re-download this program because I suspect some files have become corrupted. But I don't see it anymore on the download page. Instead I see things called J2 JRE 1.4.0 or J2 SDK 1.3.0 or J2 1
-
Microsoft-Windows-StorageSpaces-Driver Initialization error
Hello, I have a enclosure device connected to PCIe HBA and I am not able to see the chassis serial number and the RPM of the devices that are connected to this HBA. The device has a Enclosure Services Process. I see the following error in the window