I just replaced the hard drive on my g4 PowerBook -I don't know where my original software is and apple won't touch it since its "vintage".  Does anyone know what my options are to get my computer working again?

I just replaced the hard drive on my g4 PowerBook -I don't know where my original software is and apple won't touch it since its "vintage".  Does anyone know what my options are to get my computer working again?

Hello and welcome to the support community
You only option is to buy a copy of Mac OS X, either the retail disk or system disks.
There are places you can by a copy of Mac OS X, like online vendors, Amazon or eBay.
System disk are gray and come with more than one disk. Retail disk are black with a 'X' on them and often come as one DVD disk.
Not sure what version your going to require as you haven't provided any specification and model details.
I would safely assume being a G4, it would be happy to install Mac OS X 10.4 Tiger.
If you could let us know the PowerBook you own, then I am sure we could advise you further.
Best of luck

Similar Messages

  • I just replaced the hard drive on my macbook pro, reformatted new hard drive and copied over a backup from time machine now I have a kernel panic message (you must restart) - what do I do now?

    i just replaced the hard drive on my macbook pro, reformatted new hard drive, installed a back up from time machine and now have kernel panic ( you must restart your computer) what do I need to do?

    If you're able to boot, launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select the most recent panic log under System Diagnostic Reports. Post the contents – the text, please, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
    If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Safe mode is slower than normal, and some things won’t work at all.

  • I just replaced the hard drive for my Mac Pro, and I am trying to restore what is on my Time Capsule, but it wont connect, and only is giving me the pinwheel of death. What do i do?

    I just replaced the hard drive for my Mac Pro, and I am trying to restore what is on my Time Capsule, but it wont connect, and only is giving me the pinwheel of death. What do i do?

    You will need to boot from some alternate boot device to accomplish this, if you did not initialize the drive before installing it.
    If you have another Mac, you may be able to use FireWire target disk mode.
    If your MacBook has a DVD reader and you have a Mac OS X Installer/Utilities DVD, such as the one that shipped with it, you can boot from that DVD, answer only the "what Language" question, and wait a quarter minute for the MenuBar to be drawn. Then examine the Utilities menu or the Installer menu and Find Disk Utility.

  • After replacing the hard drive on my G4 Powerbook and reinstalling Tiger I am no longer able to synch between itunes and itunes, it seems that the software on the ipod is of later date than itunes and I am unable to update itunes to the state prior..

    After replacing the hard drive on my G4 Powerbook and reinstalling Tiger I am no longer able to synch between itunes and my ipod (Classic 160gb) it would seem that the software on the ipod is of later date than itunes and I am unable to update itunes to the state prior to the original harddrive's failure for Tiger OSX 10.4.11
    Any ideas on the subject would be most helpful
    Thanks in advance
    Dingoh

    The last security update released for Tiger users was the 2009-005 update. The latest version of QuickTime is 7.6.4. The last version of iTunes that can run on Tiger is 9.2.1, because 10.0 only supports Mac OS X Leopard and later.
    So, are you on version 9.2.1?
    Was it Tiger or Leopard you had on the drive before?
    iTunes 9.2.1 download...
    http://support.apple.com/kb/DL1056

  • TS1538 I get the message "unable to sync ipod.  Required folder is missing".  Never saw this before, and I have synced hundreds of times before.  Does anyone know why?

    I get the message "unable to sync ipod.  Required folder is missing".  Never saw this before, and I have synced hundreds of times before.  Does anyone know why?

    Try deleting the iPod Photo Cache folder. There may be more than one such folder. For its location see:
    iTunes: Photo sync creates iPod Photo Cac

  • I just replaced the hard drive on my Pavilion dv4 and now my screen wont turn on.

    Ok so my original hard drive in my HP Pavilion dv4 shot craps last week so I bought a new WD 500 gig for it. Prior to removing the old drive and installing the new drive my screen would light up and work properly. Now that I have replaced the drive my computer seems to be booting up but my screen does nothing but stay completely black. I know my drive is installed correctly and I'm pretty sure I haven't jarred ne thing loose in the process of changing out the drive because I only opened up the hard drive compartment to do the swap, which was extremely simple. I also was sure to remove the battery, unplug, and ground out ne static electricity before doing ne work on my computer. Im at a loss for what to try to get my computer back in working order. Ne suggestions would be greatly appreciated. Thanks
    Casey

    Thanks for ur quick reply to my problem. I tried all of that with no results... I did notice tho that the lights next to and above my caps lock key and my num lk key are now flashing. They flash in unison three times then there is a two second pause then they flash three more times and this repeats. They may have been doing this before I tried this solution but I did not take notice until now... I was also wondering how I am supposed to know, after pressing f10 to enter bios, how I can tell if my new drive is being detected when my monitor will not function? Was pressing f10 supposed to possibly make the monitor turn on? In a last ditch effort to try and further identify the problem, I re installed my old drive. Before replacing it my computer would begin to boot then display a hard error that would not allow me to continue booting and run Windows. My display would still work but I could not run Windows. After re installing the drive the monitor will not turn on. I'm beginning to think that I have a bad monitor. Is there a way of testing this with out buying one? Where does the monitor connect to the mother board? I wonder if maybe its been jarred loose, although I highly doubt it, it may still be worth looking at. Thanks again for your advice.
    Casey

  • I just replaced the hard drive on myn Macbook pro and am now trying to import my address book and calendar from the cloud but have not ben successful

    I am seeking how to bring my data from the cloud to my laptop after having had the hard drive replaced

    Open System Preferences > ICloud
    Make sure Contacts and Calendars are selected.
    iCloud should sync your data automatically.

  • I have my MacBook 13' (2006) backed up on Time Machine. I just replaced the hard drive. How do I access the Time Machine to resotre my files, setting and programs on the new HD?

    I am running Snow Leopard and have my old files isolated in a new folder on the laptop, but I want to restore the old settings, programas, etc. from the Time Machine. TM is currently backing up the new HD as if it were a new computer.

    Instead of using Time Capsule or Time Machine to access the archived backup, use Migration Assistant to restore the backup from Time Capsule. Worked like a charm.

  • Replaced the Hard Drive, now there's no power!  What did I do?

    Any help would be appreciated!
    I have a PowerBook 17" G4 and I just replaced the hard drive. After using ifixit's directions, I hooked everything up and tried to start it. Nothing! I re-opened the case and checked all of my connections. Nothing! Not a peep. Then I put my old hard drive in and reconnected. Still nothing.
    I was seated the whole time and, to the best of my knowledge, never built up static electricity. I can't figure out the next step. Also, I tried to reset the PMU, but I'm not even sure that would have worked since it won't start. The PB is old, so a new one is probably in order soon, but I'd like to get another year or so out of it.
    Any ideas? I've read that the logic board can fail. If so, is that easy to replace? I'm no expert, but I did (unsuccessfully) install a hard drive!
    Thanks in advance for any suggestions you might have.

    You also have to sometimes accept that everytime you open up and unplug things, you run the risk of disturbing something.
    No matter how experienced you are, I have seen many times where just the act of swapping a CPU or changing RAM has triggered a failure elsewhere in the system.
    I think the culprit of these occurances is voltage remaining in the capacitors. It is widely acknowledged that holding the power button down for 30 seconds after unplugging devices can restore function, so it is equally likely that failiing to do so, and failing to release the charge held in the capacitors before doing work can lead to internal discharges when plugging and unplugging devices and therefore lead to unwittingly damaging equipment.
    Just a theory though.....

  • Is it worth it to replace the hard drive of a brand new macbook?

    I'm buying a Macbook today and realize it would be cheaper to buy the 160gb laptop, and switch out the hard drive to a 320 gb (its only $76, compared to the $300 difference between the 160gb macbook and the 250gb macbook).
    I picked out the hard drive and I know where the hard drive in my laptop will be located, and how to remove and replace it. However I'm a little worried about actually doing it. I wouldn't need to back anything up because I haven't used it before, so can I just replace the hard drive before I ever even turn it on for the first time?
    Also, I've never done this before..
    What are the risks I'm taking by doing this?
    and, is it worth it?

    Yup, gotta love OWC!
    Try this:
    1. Place order for DIY (external enclosure kit + HD) kit.
    2. While waiting for delivery, enjoy your MacBook.
    3. When kit arrives, back up your MacBook to DVDs!! You know how, right?
    4. Swap drives. Careful, you'll need to swap the 4 mounting pins from the current HD to the new one. Our current HD uses hex-keyed pins. And the kit came with enough screws, right?
    5. Install "old" HD from MacBook into enclosure (FireWire 800 (zoom!) for Pros, USB for Not Pros). You did order the right one, right? And it came with the right cables, right?
    5a. Boot 'Book from that external device (you know how, right?). Maybe not as fast via that cable, hm?
    6. Restore to the new internal HD and now reboot from it. Check that all is well before . . .
    7. . . . erasing "old" HD in new enclosure. Your backup was fine, right?
    8 (and last). Use "old" HD in enclosure as your Time Machine device. What could be better? Continue to use DVDs to back up the whole Mac. (Though there are even cooler ways to bulletproof it . . .)
    With Leopard's tools, and these new Macs, geekery will never be the same. It's insanely easy to keep your stuff safe and sound for not that much $$. So gofer it!
    MSES

  • I just replaced my hard drive on my imac and now when i turn the computer on the fan is running and slowly gets louder and louder. how do i turn it off?

    I just replace my hard drive on my imac and now when i turn the computer on the fan starts running and keeps getting louder. How do i turn it off?
    thanks.

    If your machine was made after 2009 you probably installed th wrong HD. Beginning in 2009 Apple began using HD's that had an integrated fan sensor. If you did not use one of these drives then that is the problem. You should contact OWC (www.macsales.com) or visit your local AASP and they will help you select the correct HD to use.

  • HT201295 Recently Apple replaced the hard drive on Mac running Yosmite 10.10.2 and now when i try to rn FaceTime, the computer says "no camera available". Does anyone no how to fix this?

    Recently Apple replaced the hard drive on Mac running Yosmite 10.10.2 and now when i try to rn FaceTime, the computer says "no camera available". Does anyone no how to fix this?

    Assuming there is no hardware problem try reinstalling Yosemite. If this does not work then take it back to the Apple Store.
    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Also see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • My hard drive on my MacBook Pro stopped working and I had to replace the hard drive.  I cannot get my playlists and photos to appear in my iTunes and iPhoto.  Does anyone know how to resolve this?

    My hard drive on my MacBook Pro stopped working and I had to replace the hard drive.  I cannot get my playlists and photos to appear in my iTunes and iPhoto.  Does anyone know how to resolve this?

    Peace Lilly wrote:
    ...  Will I loose everything if I connect the iphone to the itunes as a new device?
    To avoid that...
    See these 2 Links...
    Syncing to a New Computer...
    https://discussions.apple.com/docs/DOC-3141
    Recovering your iTunes library from your iPod or iOS device
    https://discussions.apple.com/docs/DOC-3991

  • I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

    I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

    Have you recharge the battery for at least 2 hours, or just leave it connected for 4 hours?
    (When you replaced the Hardisk, you should also replace the battery.)
    Some other iPod SSD sites, says that you may have to format the CF in FAT32, as Mac dont read NTFS drive so if Windows is the 1st PC that your CF is connected, it may be formatted to NTFS.
    You can try erasing the CF using Disk Utilty, so that Mac can recognise it. (but not Windows)
    Have a nice day!

  • I just replaced my hard drive and restored everything from Time machine. However, I am unable to open iphoto and the following message appears Your photo library was not found. Do you want to find your iPhoto Library?

    I just replaced my hard drive and restored everything from Time machine. However, I am unable to open iphoto and the following message appears Your photo library was not found. Do you want to find your iPhoto Library?
    Where do I find this library?
    thanks
    Shak

    Twas quite a hassle if I am honest which was eventually resolved but I don't feel qualified to help anyone through the process as it required a trip to my local apple store and a genius bar appointment.
    Personally, I would do anything like moving pictures out of folders etc. Certainly not creating a new users. i don't think that is an elegant solution
    Try the following which MAY just about rescue the situation for you but if they don't work you may have to do something more drastic.
    (1) Holding down Cmd & Alt at the same time, start iPhoto by clicking on the iPhoto icon. From the resulting menu choose Rebuild photo library by selecting all available options given to you and then pressing REBUILD!
    If that doesn't work
    (2) Fire up Utilities. Go to migration assistant. Chose 'From another Time machine back-up'. Open the 'Users' option that comes up next and from there select Pictures, then uncheck everything else like Applications etc (you don't want to do a full migration of everything) and click go.
    If that doesn't work, take a deep breath and this step is rather complicated but it worked for me. First of all close iPhoto! Then go to new Finder window.
    From the Finder window choose Pictures, then iPhoto library, press CMD and the letter i. It brings up a new window. Go to Sharing & permissions. From there select the padlock to unlock settings. and then select User account, then press the 'cog' icon next to +/- abd choose Apply to enclosed items.
    This may take a while. Once completed, re-open iPhoto.
    And that should (I stress should) cure it.
    Good luck.

Maybe you are looking for