My hard drive on my MacBook Pro stopped working and I had to replace the hard drive. I cannot get my playlists and photos to appear in my iTunes and iPhoto. Does anyone know how to resolve this?
My hard drive on my MacBook Pro stopped working and I had to replace the hard drive. I cannot get my playlists and photos to appear in my iTunes and iPhoto. Does anyone know how to resolve this?
Peace Lilly wrote:
... Will I loose everything if I connect the iphone to the itunes as a new device?
To avoid that...
See these 2 Links...
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991
Similar Messages
-
I downloaded a ringdown direct from itunes to my iphone 4S. When I go to settings/sounds/ringtone, the new ringtone is not there! I have downloaded it twice, but still not there. Does anyone know how to resolve this?
Thanks, your advice prompted me to look at it again on itunes, and discovered that i have actually downloaded the full song instead of the ringtone. False alarm...and thank you!
-
Hi! I have a MacBook and I am trying to delete files from Microsoft Word. Somehow I cannot simply throw them in the trash. Does anyone know how to resolve this issue?
Why not? Are there error messages? Where are the files located? Why are you deleting MicroSoft Word files?
-
I have a Canon MG6120 all in one. When I start it I get error code 5050. Does anyone know how to resolve this, besides power off/ power on?
Solved!
Go to Solution.Hello gregg.
Please try the following to see if we can resolve your issue:
1. Turn the printer off.
2. Unplug the power from the printer for at least 5-10 minutes.
3. While unplugged, remove any paper from the unit.
4. Double check for any obstructions found in the unit or paper paths.
5. If no obstructions are found, plug the power back in and turn the unit on.
If the issue persists, the unit will require service for correction. We apologize for this inconvenience. Please contact our support group using the "Contact Us" option below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
Yesterday I turned my phone off then a couple of hours later when I turned it back on most of the built in icons, including 'settings' and 'messages' had vanished. Now I can't do anything on my phone does anyone know how to resolve this?
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281 -
Hi. I get the following message when trying to update or install an application: "impossible to connect to iTunes store". Does anyone know how to fix this? Thanks!
Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/ -
I just updated my iphone 5 to ios 7 and updated itunes as well...now my iphone is now showing up in itunes devices. Does anyone know how to fix this problem?
Same problem on im iPhone4 / iOS6 with normal camera!
The camera takes a picture but the picture (video) doesnt appear in my Photos and therefore is not saved! -
I am unable to recover my purchased ringtones from the itunes store. Does anyone know how to do this?
My account's balance shows at the top left of the store's page on my computer's iTunes, and by logging in to view my account via the Store > View Account menu option. If yours doesn't show (you've tried logging out and back into your account to see if it then shows ?), and you didn't have any pre-orders or auto-renewing subscriptions that might have used it, then you could try contacting iTunes support and see if they can help : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
-
I am trying to hook my iPad up to my TV so I can watch netflix on it, however, when i hook the AV cable up i get a message that says "no volume available." my iPad is not muted, does anyone know how to fix this problem?
Read this link and it may provide some help: https://discussions.apple.com/message/15460209#15460209
-
I cannot add my phone number to Facetime or imessage. The number is listed but not ticked and is greyed out. Does anyone know how to add the phone number? Thanks for any help.
Adobe Reader is a FREE program, so you would not enter a credit card
If you have a subscription to a PAID program, removing your credit card information would cause that program to stop working when you stop paying for your subscription
If that is what you want, here is the information on how to cancel
Cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html -
This only happens with youtube videos
I also have it - I updated Firefox and Flash both today.
When a YouTube is running and you cover all of the image with another page, a copy of the flash output appears at the top left corner of the screen, on top of anything there, and persists as long as the video is covered.
The only way to get rid of it is stop the video and wipe another window over the flash ghost.
I'd guess somebody isn't telling flash to stop updating when covered, and it writes to 0,0 instead.
Might be in flash, or might be in Firefox. -
I am trying to resore my iphone 4 and the phone keeps causing an error 4005. i have updated itunes and am at a loss as how to restore phone. please help
Hello there, Shaz18663.
The following Knowledge Base article provides a solution for the error you have mentioned:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Particularly:
Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I am using a MacBook Pro running Yosemite 10.10.2, using Pages 5.5.2.
I've tried signing off and on, and restarting my MacBook, which sometimes works, but the problem re-occurs. Same problem using Apple Numbers and iCloud.
Opening local files seems to work more consistently.
This issue has made Pages and iCloud fairly useless to me. Does anyone have any ideas how to correct this?
Thanks.Hi Ibo,
This is what just worked for me:
In Finder, I've dragged all Pages files from the iCloud Drive to the Documents folder on my iMac. (Finder asks your confirmation to remove the files from iCloud; confirm that)
Once they were on my local hard drive, the files could be opened again.
It looks to me as if something has changed in iCloud quite recently, leading to this mess. Not the first time, I've had this before. Now it's back. Sigh. And, as you wrote, it renders iCloud fairly useless. Back to Dropbox I suppose. -
I recently installed Evernote on my computer, then downloaded the web clipper app to Firefox. I believe there is supposed to be an icon or something to open the app, but I see nothing on my Firefox page. I don't know how I am supposed to access the app from Firefox.
If you never want them deleted then you don't want to use Time Machine to back the photos up to it.
If you do that as soon as you delete the originals then the photos on the Time Capsule would be candidates for deletion.
You might consider using the Vault function of Aperture to copy the data over if you are using Aperture.
You should also consider how you are going to back the photos up. Since you never want only a single copy of them.
Allan -
There is no sound when I play my iTunes songs. Does anyone know how to fix this?
I have a lot of songs in my iTunes library, but there is no longer any sound when I play them. I've tried reinstalling iTunes, nothing seems to work.
Hi sandybidewell,
Thanks for visiting Apple Support Communities.
The steps in this article can help if you do not hear sound from iTunes:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/ts1362
Cheers,
Jeremy
Maybe you are looking for
-
My Hitachi external drive does not show up in my Dell Lapto Device Manager
I have a Dell external drive which is Hitachi Model 72323. I was happy with it until I used bit locker to add a password on it. After that it worked a couple of times then my computer will not recognize the drive again. It does not even show up in my
-
Facebook Video says Firefox "is not compatible, therefore no video Chat function.
Upgraded Windows 8 to 8.1. Since then the Video chat function does not appear as a selection when wanting to video with a person. Message says that, "the browser is incompatible". The video function worked fine in version 8. As I remember, Facebook u
-
Hi, We have cProject documents linked to DMS (different systems). Now we need when a document is created at item level is stored in DMS ( different systems). Is it possible? Thanks, Sara
-
Multiple SSIDS with VLAN ACL seperation
Hi, I have bought a 887W and I'm new to wireless on a router, I need advice about seperating multiple SSIDs with access list. I have configured 2 SSIDs one for 'trusted' clients and one for 'guest' clients. I want to prevent the 'guest' SSID obtainin
-
Adobe Forms --Amount field Problem
Hello All, I have one clarification.I have one field called amount.Its value is taken as 0.00 from the table. I have to make it as blank.I have made it as blank to that field in display pattern properties by setting as * in adobe designer. This is su