I just upgraded to 10...and now links and buttons black out when my cursor moves over them, and my entire window goes black whenever I scroll.
I just upgraded to Firefox 10 and had to go back to 3.6 because 10 doesn't seem to work on my computer. I have a windows 7 pc. After upgrading, whenever I moved my cursor over a button or link, that link blanks out or a black bock appears over it. Additionally, whenever I try to scroll, the entire window goes black until I stop scrolling.
Hi Nester88,
I'd try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit.
Hopefully this helps!
Similar Messages
-
Just upgraded on 2010 iMac - now fans keep running full out
I just upgraded to Yosemite on my 2010 iMac 27" i7. Since installing, I have shut down and restarted the computer twice due to the fans in the machine running full out out of nowhere. The air coming out of the top of the machine is relatively cool, and I don't think that heat is the issue but something to do with the system update. The machine runs fine for a while, and then the fans start up a few minutes after it runs. Looking at the activity monitor, I can find no process that is running a processor rampant, nor anything else that I can tell that might be causing all of this.
Has anyone else had a similar problem to this? Any proposed solutions, or diagnostic steps to ferret out the problem?
-JohnNew update: I have indeed found something new. I rad Apple Hardware Diagnostics, the more in-depth test, which revealed that a temperature sensor is not functioning properly:
Error Code: 4SNS/1/C0000008: TA0P--124
The funny thing is that this was not an issue prior to updating to 10.10. I have tried out a few fan control programs and have experimented with them as well. So far I have found that if I attempt to modify the fan speed once the issue develops, no amount of software coaxing will slow the fans down. Also, even before the fans run, all of the temperature sensors are reading within normal parameters. Once the fans run, they still are all at normal or below normal parameters. There is no reading on any sensor indicating that it is not working or reading out of range. Here are two screen shots taken before the issue develops, and right after:
At this point, in a few weeks, I will open the machine and check the connections for the sensors and rule out a connection issue. I still think it may be software related, however. Does anyone have more suggestions for me to try? Thanks in advance.
-John -
I have a imac 10.6.8 with snow leopard. Just upgraded to iphoto 11 Now my computer keeps freezing up mostly if my iphone is connected. It even freezes in safari. Can i get my money back and unistall
This forum is for people to discuss issues with other users. Apple aren't here. No one here can give you your money back. So, contact the the App Store support, if that's where you bought it. There's a link on the right hand side of the App Store window.
Regards
TD -
I just upgraded to Mavericks and now my Intel iMac is running more slowly. There have been no other changes. What's up with this???
This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running a program at the instance of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
clear; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; R () { o=; [[ r -eq 0 ]]; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o="${o##+( )}"; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=`system_profiler SPHardwareDataType | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Memory (GB)"; o=`system_profiler SPDiagnosticsDataType | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; egrep -q 'No th|pms' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* && ls | grep -v 'ag$' | tail | awk -F_ '{$NF=a[split($NF,a,".")]; print}'`; Pm "${D[$i]} diagnostics"; done; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`find -L {/,}L*/Lau* -type f -exec sh -c 'file -b "$1" | grep -qw XML' {} {} \; -print | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`find -L /{S*/,}L*/Star* -type f -exec sh -c 'file -b "$1" | egrep -q "XML|bin|exec"' {} {} \; -print`; Pm "StartupItems"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist ! -exec sh -c 'plutil -s "$1" >&-' {} {} \; -print`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There wiil be nothing in the Terminal window and no indication of progress until it's done. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
I have just upgraded to Lion and now my VPN connection does not work properly. It was working fine when I was using Leopard. The VPN is My Private Network and we use it to link to BBC iPlayer when abroad. It will actually connect to the VPN site and shows a UK IP address, but then when we try to load an iPlayer programme we get the message from the BBC that we are not in the country and, therefore, cannot access the site. Any suggestions?
Have a look at System Preferences, Accessibility, VoiceOver.
(Command - F5).
charlie -
I have just upgraded to Maverick and now I cannot find certain JPG 's . These files do exist however I can find them manually . I rely on the search facility and this is slowing me down, I am having to trawl through stuff to find the file I want , before I would put in part of the title and the machine would find it.
In addition to what Allen says, you may find these search tools helpful:
http://apps.tempel.org/FindAnyFile/
http://www.devontechnologies.com/products/freeware/ - EasyFind
http://www.osxbytes.com/ - iFileX (note the MacUpdate link provided on osxbytes page has a Malware advertisement forMacKeeper, do not download).
Note: you posted to the Classic operating system forum. That refers to Mac operating systems from 2005 and earlier in Classic mode, and Mac operating systems as boot systems on certain 2003 and earlier Macs. Mavericks forum questions normally get answered here:
OS X Mavericks -
TS4062 I've just 'upgraded' my ipod and now my G5 can no longer talk to my ipod.
I've just 'upgraded' my ipod and now my G5 can no longer talk to my ipod.
Why can I not just transfer my ipod (music, movies etc) info to my other macbooks? This service stinks.Are you running Leopard? If so, try updating to iTunes 10.6.3.25.
A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
iTunes 10.6.3 -
I just upgraded my iphone and now whenever it goes to sleep I have to enter a password to open it. Very frustrating! Can I disable this annoying feature? I went to Settings and disabled the Find My Phone feature thinking that would do it. But it didn't.
I am somewhat infotech-challenged. So I would appreciate help on this. Thank you in advance.Settings > General > Passcode Lock : OFF
Important leave Find My iPhone ON in
Settings > iCloud > Find My iPhone : ON -
I just upgraded to premium and now I can't hear my music
I just upgraded to premium and now I can't hear my music. And add to join premium keeps popping up when I try to listen but I'd already joined. Very frustrating. How do I get in touch with someone?
Hello: Is this happening on an iPhone or a Windows PC as both posts have different systems posted about?
-
Just upgraded to Mavericks. Now I cannot access scans from my hp scanner. After it complete the scans and I try to save as tiff, jpeg or pdf I get a either a grey blur or a message that says cannot save because the file cannot be written to. I did not have any problems before the upgrade. I would greatly appreciate any light shed on this.
Go to the HP site and look for drivers for your scanner. It apparently needs an updated driver to work with Mavericks.
-
I just upgraded to yellowstone and now my apple tv is telling me it is not compatible with HDCP. What can I do to resolve the problem?
Hi billzundel17,
If you are having an issue with your Apple TV telling you it can not play HDCP content, I would suggest that you troubleshoot using the steps in this article -
Apple TV (2nd and 3rd generation): About Apple TV and HDCP - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
I just upgraded my workstation and render farm to AE CC 2014 and now I receive a "render control file not valid" on my render nodes when I try and render out an image sequence. Any ideas why the update would cause this? All my machines are updated to the latest version of AE CC 2014. Thanks!
Sorry I meant "Update". I was using AE CC, Installed AE CC 2014 on all my machines recently.
-
HELP!!!! Just upgrade to Tiger and now nothing works
Please help me iv just upgraded to tiger and now none of my programs will open they crash on start-up, and also when i restart i get a little box with a blue globe inside it. then it goes to the unhappy face in a folder icon, then eventually it starts up. Please help me im buggerd without the mac.
Hi Andy!
What size is the Hard Drive, and how much space is avaialble?
How much RAM is installed, and is it original or added?
Did you use a Full Retail Version, of the Tiger Install DVD, to upgrade?
Did you do an Archive & Install, preserving User settings & preferences, installation, and if so, is the Previous System folder still on the HD?
ali b -
I just upgraded itunes. And now I cannot see my iPads or iPod in the left margin of itunes? But I can still see them in my Windows Explorer?
Hey there MattSK123,
Thank you for your question. It sounds like you are unable to see either of your devices in the sidebar of iTunes after a recent update. A number of issues could cause this type of behaviour, and would recommend starting with the troubleshooting from the article named:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
If the issue is not resolved, I would next re install iTunes from either of the following articles depending on the version of Windows you have:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Or
Removing and Reinstalling iTunes and other software components for Windows XP
http://support.apple.com/kb/ht1925
Thank you for using Apple Support Communities.
Take care,
Sterling -
I just upgraded to Mavrick and it remind's me of Why I went to a Mac in the first place. Window's went to Vista and Added all kind's of app that You all ready have and don't need. I want to go back to Snow Leopard 10.6.8 but scard to lose everything on my hard drive. I have a externale hard dr. for my Time Machine that has all my back up's on it. Can I just reinstall Snow and then plug in my time machine and go back and not lose anything. Please help Mavrick is getting me mader by the mintue. My Mac ran fine until I upgraded, Now Every move I make take's forever.
I just don't want to lose all I have on my hard dr.
Thank's for any Help
JayMavericks - reverting back from:
https://discussions.apple.com/docs/DOC-6162
Maybe you are looking for
-
Creating dynamic value range, one week at a time
Every Monday, I query a table to get data for the past week, every Monday (last Monday) to Sunday. I do some calculations with the data and insert the data and dates into a table. I then use cfchart to create a graph using this data. The drilldown us
-
Win 8.1 fails to wake from sleeping probook 4340s
Dear HP forum, i have hp probook 4340s and i recently installed windows 8.1 on samsung EVO SSD. Recently i have noticed, that my PC have problem with sleeping, i can hibernte with no problem. My PC can sleep, but when i try to wake it up i see black
-
Full Screen Interactive Images?
Apple's video demo of the interactive images widget (as seen on this page: http://www.apple.com/ibooks-author/gallery.html ) shows the image opening full screen when clicked. I cannot make this happen. The 'full-screen' option is always disabled in
-
Trying to use image processor in bridge. Go to tools-->photoshop--> image processor....then PS opens up but window in PS will not open . I have used this tool in CS 5 and no problems. HELP!
-
Why My E75 can't edit picture (jpg file, etc.)
My previous N73, 6110Navigator can edit picture, why E75 remove this function? Thanks. Could next firmware version add this functionality?