I just want to share my experience or rather terrible experience with apple service.....I am soooo disappointed with the apple customer service at the local store in Tampa......every time they give u an appointment and make people wait for hours......ther

I am soooo disappointed with the apple customer service at the local store in Tampa......every time they give u an appointment and make people wait for hours......there was some cosmetic problems with the screen of my Mac book pro....they replaced it but the computer would not turn on....and btw when I went to pick up my computer the representative handover my computer to another guy without checking his id who was there to pick up his phone.......then I had to take it back second time this time they messed up my iWork...I took it back but they couldn't retrieve my history of purchase of iWork...and then when I installed the iWork at home...none of the applications is working.... .I will have to take is back fourth time.....I loved apple products but may be not anymore.......

Other than what Shotist007's remarks (which solves nothing) your experience is not common. First I would speak to the store manager to get things rectified for you. If that doesn't work out then I would contact AppleCare and speak to a customer service representative and complain via that venue.

Similar Messages

  • TS3297 i cannot buy anything inside any game every time they give me error message contact itunes support

    i cannot buy anything inside any game every time they give me error message contact itunes support

    Do what it told you to do.  Contact itunes support

  • I set up an account including approval for paypal billing but every time I try to sign in to make a purchase for download I get a message that takes me back through the process of settin up my account. Help!

    I just set up an account at the I tunes store including authorization to charge my pay pal abount. I have also received e-mail confirmation that the account is set up, but every time I try to make a purchase I get a message that says apple ID has not yet been used with the I Tunes Store and it takes me back through the process of authorizing my paypay account. Help!

    Once you purchase or download an app it will always be associated with the Apple ID used to download it. When that app requires and update you must use the Apple ID and password used to download it in the first place. The only way around this is to delete the apps the require the old Apple ID and download or purchase them again with the new Apple ID.

  • Not rally a question, just wanted to share my absolute frustration with the update of iTunes...this is, without a shadow of a doubt THE WORST application i have EVER used, Mac or PC! And that's saying something with the amount of PC dross that's out there

    Not rally a question, just wanted to share my absolute frustration with the update of iTunes...this is, without a shadow of a doubt THE WORST application i have EVER used, Mac or PC! And that's saying something with the amount of PC dross that's out there...Apple...PLEASE update and give us back the old version of iTunes...

    Pull down View > Show Sidebar. This will give you back the same functionality of iTunes 10.x.x.

  • What is a quick alternative to launching an enterprise DPS app if Apple Store rejects the App? We are under a major deadline and can't wait for Apple. We want to host the app elsewhere. How do we host our DPS app on our client's website?

    What is a quick alternative to launching an enterprise DPS app if Apple Store rejects the App? We are under a major deadline and can't wait for Apple to approve. We want to host the app elsewhere. How do we host our DPS app on our client's website? Thanks.

    Unless I misunderstand the question, you can't do what you're asking to do. Apple doesn't allow you to bypass their store and host public apps on a website. The exception is an enterprise app, which requires an Enterprise account with both Apple and Adobe. This type of enterprise app can be distributed only within the company. If that's what you want to do, you can learn more here:
    Digital Publishing Suite Help | Creating viewer apps for private distribution
    Distributing enterprise iOS viewer applications with Digital Publishing Suite | Adobe Developer Connection
    Another option is to add the development app to several devices and use those for your demo.

  • I just want to share files

    I'm upgrading because we need an application that only runs on the server.
    But I just want to share files and we're all friends so when I create a document someone else should be able to modify it and not get a message that it's read-only. I made the user account and I made a group. I put all the users in the same group but I still not able to collaborate.
    Multi-user for multi security, but we just want to get work done!

    You need to add an Access Control List (ACL) entry to the share point on which your group needs read & write access:
    1. Enable ACLs for the volume that houses the share point (shared folder): Click Sharing in Workgroup Manager, then click All. Locate the volume and check "enable access controls on volume," then click Apply.
    2. Click Share Points and select the desired share point. In the ACL list in the Access section, click the Users & Groups button and drag your group into the list. Choose "Read & Write" from the pop-up menu and verify that the inherit settings apply to all child files and folders as well as the parent (inherited will be no). Apply changes.
    3. If you already have files or folders in the share point, mount that share point on a client computer and copy each file/folder off, delete it, then copy it back to the share point. This way, it will inherit the ACL information you set in step 2. From now on, new files created in the share point (or copied to it) will inherit the privileges set in step 2.
    For more information, please see: http://discussions.apple.com/thread.jspa?messageID=648307&#648307
    --Gerrit

  • Convert doc to PDF and make it available for workspace

    Hi,
    is there a way, how to convert a doc file to PDF file and make it available for the workspace (accept - deny scenario)?
    Lets say, that I have a contract that has to be approved by my manager. I convert the doc to PDF file and send it to his to-do queue. He than decides if it is a good agreement or bad one.
    I see couple of tricks in this. First, the converted file needs to have process fields included, so it has to be a form.
    Converted file is a flat PDF. I tried to use DDX to merge flat PDF and form with process fields, however that throwed and error.
    Workaround could be creating an envelope saying, hey, look in the attachments section, there is something you need to review.
    I can create an attachment in the form with DDX code, however only in the DDX UI interface, for some reason, it wont work in the process in LC.
    Also, I have difficulties with routes after user hits the accept, deny buttons in workspace, nothing happens :-(
    Could you please give me some advices, what kind of variables I need, what types they should be and how the process should looklike? I want to invoke it over the WSDL so at least one document has to be passed over it. The envelope can be in the resources section in LC (makes sense, but I do not know how to address it in the DDX and afterwards)
    Thanks in advance,
    H.

    Hi Jasmin,
    I can add the converted document to PDF as a attachment to the XDP form in the workspace.
    I am strugling now with that envelope (the XDP), cant render it to PDF and than workspace enable it. I will have a look around the web because it will be there. One question is can I control permitions on the attachment? I want just read only permitions.
    Thanks Jasmin for your continuous help.
    J

  • I wish to del one apple id and make one common for mac and i phone, please suggest

    i wish to del one apple id and make one common for mac and i phone, please suggest

    You cannot delete an Apple ID, you just stop using it. Understand that any apps purchased using that ID can only be updated with it. Apps are tied that ID used to purchase them. If you want to use a new ID for everything, you will need to repurchase any old apps using the new ID.

  • Hello, my mac book air won't update. Every time i try it goes onto the purple starry screen and stays that way for hours, so i just have to shut it down. I have deleted a lot on my laptop so there is enough space, please help?

    Hello, my mac book air won't update. Every time i try it goes onto the purple starry screen and stays that way for hours, so i just have to shut it down. I have deleted a lot on my laptop so there is enough space, please help?

    I believe that system has a hall sensor on it to detect when the lid is closed so it can put the system to sleep and/or disable the monitor so it can be used with an external monitor only. If the sensor is marginal or has a bad cable, it may intermittently cut the monitor on and off, and may likewise put the system to sleep. One way to check would be to plug in an external monitor and if the laptop's screen cuts off or doesn't show up, start using the trackpad and press on a non-typing key like the shift key. If the external display suddenly pops and becomes active while the laptop display remains black, it's probably a problem with the sensor or the cable/connection. You might be able to fool the sensor into kicking on and off by moving a magnet over it. It's located on the left had side of the base with the unit opened up, and right over the audio output plug.
    I know of some people that put a small magnet right over the hall sensor's location so the laptop display turns off and they use the system with an external monitor, keyboard, and mouse. If fooling with magnets, make sure they're small and don't get them close to the hard drive because a strong magnet can wipe them out.
    I don't know if this will help you much, but it might.

  • Apple makes you wait 8 hours to try to access your account

    This is insanity.  All of a sudden my devices are telling me I need to answer a bunch of security questions that I have no idea what the answers are.  I can't access my apple ID.  I can't make any purchases.  I can't do anything for at least 8 hours.  The only available tech support is scheduling a phone call for like THREE days from now.  What the **** Apple??  You close my account down and make it impossible for me to get help for up to 3 days?!?!?!?  This is bull$h!t

    So I waited 8 hours and I still can't reset my security questions.  This guide:
    https://support.apple.com/kb/HT5312?viewlocale=en_US
    Says that I can have a reset sent to my alternate email address, but the link they describe being underneath the first two security questions that is supposed to say "Forgot your answers? Send reset security info email to [email protected]" doesn't exist.
    Hey Apple, great job completely crippling your customers.  You block my account, and provide no way for me to gain access.  I can't make a new account because if I delete this one, all my purchases disappear.  I can make a second one, but that means I will constantly have to switch back and forth and that will invalidate any purchases that I've made on the opposing account.
    This is an extremely poor security strategy.  Not thought through at all.  Apple, why don't you spend a few of those Billions of dollars just laying aroud and do slightly less than a half-assed job when coming up with a security plan.

  • I need to reinstall my original factory disc and reset my computer to the beginning. It currently has lion. Do I need to erase my HD first to clear and make new room for the install disc.

    I need to reinstall my original factory disc and reset my computer to the beginning. It currently has lion. Do I need to erase my HD first to clear and make new room for the install disc.

    Prepare Your Mac for Sale
    Boot from the OS X Installer Disc One that came with the computer.  After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.  After DU loads select the startup volume from the left side list then click on the Erase tab.  Set the format type to Mac OS Extended (Journaled) then click on the Options button.  Select the one pass Zero Data option and click on the OK button.  Then click on the Erase button.
    Note: You can skip the Zero Data option if you are not concerned about removing sensitive personal data from the hard drive.  If you choose to skip this part of the process then it is possible for others to recover data from the hard drive.  The Zero Data procedure will prevent others from getting access to your personal information.
    This process will take 30 minutes to several hours depending upon the size of the hard drive.  After formatting has completed quit DU and return to the installer.  Now complete the OS X installation.  At the completion of the installation do not restart the computer.  Instead just shut it off.  The next user will be presented with the Setup Assistant when they turn on the computer just as it would if new out of the box.

  • Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

    Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

    We are all iphone users just like you.
    Do you have a question for fellow iphone users?

  • Deleted recently added playlist how do i add back to playlist and make destination playlist for imports

    i deleted recently added playlist and want to add back, and make it destination for imported songs how do i do

    Howdy Mark,
    The Recently Added playlist is a Smart Album that has specific settings to automatically add new content to that playlist. It can be recreated manually if accidentally deleted, you can use this article named Archived - iTunes: How to create a Smart Playlist found here http://support.apple.com/kb/HT1801.
    Choose File > New Smart Playlist.
    To have iTunes add songs that match specific criteria, make sure to select "Match the following rule," then make your selections from the pop-up menus.
    For example, you might want iTunes to only add songs that are by a particular artist, or songs with at least a four-star rating.
    To add additional matching criteria, click the Add + button.
    Here are the parameters to use when you create the new Smart Album:
    1. Check the box that says Match the Following rule:
    2. Change the first set of criteria to Date Added, In the Last, 2, weeks.
    3. Add another line for criteria by clicking the + button
    4. The second set of criteria should be as follows. Media Kind, is not, podcast.
    5. Uncheck Limit To, and Match only checked items, and check Live Updating.
    That when that is done you will have a new smart playlist that you can rename to Recently Added by double clicking the smart album name.
    All the very best,
    Sterling

  • HT4865 right now i share an icloud with my sisters phone how do i log out of hers and make my own for my own phone without deleting either of our apps etc?

    right now i share an icould with my sister's phone how do i log out of hers and make my own for my phone without deleting either of our apps etc on our phone?

    You don't need to worry about apps.  You can continue to share the same ID for the iTunes and App stores but in order to create a new iCloud account you will need to use a different ID (it doesn't need to be the same as your iTunes ID).
    To migrate your phone to your own account,  if you have any photos in photo stream that you want to save on your phone, open your my photo stream album and save them to the camera roll by tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll. 
    Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account.  (This will only delete the account from this phone, not from iCloud.  Your sister's phone will not be effected by this.)  When prompted about what to do with the iCloud data, be sure to select Keep On My iPhone.  Next, set up your new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom).  Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge.  This will upload the data to the new account.
    Once your phone is on its own account, you can go to icloud.com on your computer, sign into your account and manually delete any of your sister's data from your account.  She can also delete any of your data from her account.

  • The class I am teaching starts Monday and I cannot wait for snail mail return of my serial number. M

    The class I am teaching starts Monday and I cannot wait for snail mail return of my serial number. My product code is <removed by mod, kglad>. What help can of give me?

    contact adobe support, http://helpx.adobe.com/contact.html?product=flash&topic=using-my-product-or-service

Maybe you are looking for

  • WBS element field to Depreciation Simulation Report  output display

    Hi SAP Experts, We need to Add the WBS element field to Depreciation Simulation Report  output display (S_ALR_87012936) Could please give your valuable inputs Thanks Hari Pothula

  • Trouble Compiling CUPS 1.4.1 via ABS

    I've recompiled all but a few packages on my system, and am now trying to compile CUPS 1.4.1 from the extra repo.  Its compilation always errors on me with messages stating it cannot find various header files, php.h, php_ini.h, and ext/standard/info.

  • Cant get some videos on ipod because of an error message

    on my 60gb ipod i just got 4 xmas i have tried everything i can think of and nothing works. i always get this error message: "Some of the songs in itunes music libray, including the song("names the music video i am trying to play"), were not copied t

  • Error adding Management Point over Win2008 SP2 x86

    Hi, I am using SCCM 2012 R2. I am trying to install an additional management point over Windows 2008 Enterprise SP2 x86. The prerequisites was installed based on the following article: http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_Sit

  • X200 Webcam

    I was wondering if all X200's came with a webcam on the top of the screen.  Since I ordered one a while ago and still hasn't shipped, I don't quite remember there being an option for a webcam or not.  I don't want to miss out a feature that is so eas