I loose my home network connectivity after my iMac is awaken. This began after I upgraded to Lion. Is there a fix to this problem?

I loose my home network connectivity after my iMac is awaken. This began after I upgraded to Lion. Is there a fix to this problem?

see if this article helps: http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

Similar Messages

  • External display, don´t connect after the upgrade to Lion?

    I frequently use an external display when working. Now after the upgrade to Lion the mini dvi port seem to work. Signal goes though but no picture. Display works fine with my other Mac. Really need this to work. Pleas help me out and I´ll buy a new MacBook Pro A.S.A.P . 

    Still sounds like the display port is not sending out a video signal.
    Try this:
    Leave the Mac powered on, close the lid, wait for it to go to sleep. Using an external keyboard, press the space key. This usually activates and wakes the computer back up to using the external display port.
    - Mark
    MH Tech Solutions, LLC.

  • Windows 7 Pro not finding network connections after boot camp installation. Is there something special we have to do to get the network (wired and wireless) set up?

    Any suggestions for getting the network connections working on Windows 7 Pro running on a Mac Min with OSX Lion?

    tim-bob wrote:
    Any suggestions for getting the network connections working on Windows 7 Pro running on a Mac Min with OSX Lion?
    If you haven't yet installed the Windows Support Software, that's probably why, so install it now.

  • My Mac Pro loses network connection after wake from sleep since Yosemite upgrade.

    Mac Pro loses network connection after wake from sleep since Yosemite upgrade. Any one have this issue as well. And is there a work around?

    Wi-Fi?
    Wi-FI connection drops
    Wi-Fi Problems in OS X Yosemite
    Wi-Fi Problems in OS X Yosemite (2)
    Wireless Diagnostics
    Also try turning off Bluetooth.
    Troubleshooting Wi-Fi issues in OS X
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)

  • Why does the iPhone lose home network connection?

    My new iPhone 5 keeps losing my home network connection. Any advice? I've tried resetting network settings, turning the phone off and on again and turning the router off and on again. Thanks.

    I'm looking into that possibility.......have a cordless phone in the office, a PC, cell phones, etc. Will clear them out and recheck. The maddening thing is that the iBook is totally bulletproof even in that environment. Why would the iMac be having these issues, but not the iBook? Is Airport Extreme more robust, or that much better than Airport?
    Even now, the iMac shows no network - yet I'm writing this on the iBook right next to it, and it's had no network interruption whatsoever.
    Do you have any knowledge of those "error" notations from the syslog? Could they be pointing to anything else?
    Thanks much.....

  • MHP to home network connectivity

    Hello,
    I have a case where I want to connect from an MHP box to the home network. Say I want to connect to my home PC to transfer some data from the box. Is my only option going through the return channel and the providers servers, create a socket to my home PC and transfer through there? Seems like a bit of a long way to go if they are actually sitting next to each other.
    Also, are there any good docs available on the limitations of the MHP as opposed to the full Java SDK on a PC? I have read plenty of docs but am yet to see an explicit coverage on this topic. Any help and references would be great.
    thanks,

    The SDK-MHP differences are listed in the MHP spec it seems. Its just 1080+ pages so a bit much but buried in there. Thats where I found the differences. I guess you are more interested on the MHP-home network connectivity though.
    As for accessing the home network I haven't really found anything clearly stated on that. I will need to do some testing on that myself I guess and make do with using the sockets like the examples do until I find clear answers from somewhere. I'm not sure how to test it though since using the dev kit is not a good example for me as it is all located in the same room. That is even the return channel goes to the same room so it might seem to work even if it doesnt if that makes sence. Someone did tell me it should be easy but I think they regarded it as the same as connecting from any networked device and didn't really have exact knowledge on it. So remains to be seen. Let me know if you find something :).

  • Apple TV2 can't find my network connection after recent update?

    Why can't my Apple TV2 can't find my network connection after recent update?

    I had to update the software on my Airport Extreme then reset my apple tv and that resolved the issue for me.

  • FP1600 loses network connection after a few hours

    My FP1600 loses its network connection after a few hours. It is part number 185690C-01, with firmware 4.11. I am running FieldPoint Explorer version 3.0.1 and LabView 6.1 from Windows XP Professional. I set it up, and everything runs fine for 4 hours or more. I do not have the network watchdog enabled, and the FP1600 is in constant communication with the host computer in any case. Sometime in the middle of the night the communication is lost. The FP1600 link light
    is on, and it is still receiving packets, but it will not respond to a ping or any other communications. Only a power cycle brings it back. The FP1600 is sitting right next to the host computer, both attached to the same network switch. There is no interruptio
    n of network services to the two.

    Hi Heinz,
    We are also trying to troubleshoot this same problem (Intermitten network connection loss with FP1600 Ethernet Module - Error code "33163", Error Message - "FP1600 Connection to module has been lost."). We have checked other possible causes for this sort of behaviour. Including independent assessment of netowork availability at the time of error reporting, connecting dedicated power supply to the FP1600 module, temperature of cabinet housing the module (which is between 10 and 50 deg C), disconnecting sensors connected to various I/O modules connected to this module, increasing duration of parameter "time out" (the time module will wait before reporting an error if it can not access network). However, none of the above resolved the intermittent and random network loss errors.
    The MAX version is 3.0.2, and the firmware on the module is 4.17, Labview version is 7.0 and the Operating System is windows NT.
    I was wondering is there any information about this problem from any user or NI recently. The only solution looking in to this discussion forum seems to be replacing the module.
    MehulMessage Edited by MPatel on 02-28-2005 08:16 PM

  • 7.1 update to IPad now unable to use FaceTime and iMessage says could not sign in check your network connection.  Why am I seeing this when I am connected?

    7.1 update to IPad now unable to use FaceTime and iMessage says could not sign in check your network connection.  Why am I seeing this when I am connected?

    Check Settings>General>Date & Time>Set Automatically>On. Make sure that the time zone setting is also set correctly.
    If that didn't solve the problem, restart your iPad and try again. If that fails, reset your iPad and try again.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • I have a windows 7 desktop with an external hard drive setup on my home network, will i be able to access this on my home network to save and retrieve files from my mac air?

    i have a windows 7 desktop with an external hard drive setup on my home network, will i be able to access this on my home network to save and retrieve files from my mac air?

    Troubleshooting Home Sharing - http://support.apple.com/kb/TS2972

  • I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

    I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
    After +/- 10 to 15min my connection is gone.
    Does anyone have a sollution?

    Lots of people are having the same problem, you're not the only one, belieeeeve me.
    Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
    It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
    So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now.  I already posted  a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
    i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
    Site:
    http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

  • TS4268 faceTime activation...says could not sign in, Please check your network connection and try again. Done this several time, the network is connected to internet....what can I do?

    faceTime activation...says could not sign in, Please check your network connection and try again. Done this several time, the network is connected to internet....what can I do?

    Face Time was working, but just stopped for some reason

  • YOUTUBE WONT PLAY AFTER I UPGRADED TO LION

    hi guys! i have another problem. after i upgraded to lion. youtube isnt working. a friend told me maybe i should give it more time to buffer since it could be my network provider. but i never had this problem prior to upgradng to Lion. i need my youtube to get running like it used to.
    PLEASE HELP ME GUYS!!!

    I dont have another browser. I only use safari. I stumble upon some an article saying that I need to download the lastest Adobe and so I did that. Nothing works still. Im getting frustrated coz I dont know if what Im doing is right. Isnt upgrading to lion supposed to make things easier. But it only gives me headache. Im sorry if im ranting out. I didnt sleep last night thinking of a solution to this problem. Im so sorry.

  • I need to download dell drivers to a jumpdrive connected to my iMac.  Will this cause problems with my Mac?

    I need to download dell drivers to a jumpdrive connected to my iMac.  Will this cause problems with my Mac?

    Thanks.  These drivers are for the audio, etc. for a dell laptop I purchased used.  ( Needed something cheap for a training video that would only run on Windows.  Tried Emedia player but picture was too fuzzy.)  Dell support said I should contact Apple support for instructions on how to get the drivers onto the jumpdrive.  Any tips on doing that?

  • ITunes does not start when I plug in my iphone after I upgraded to Lion?

    iTunes does not start when I plug in my iphone after I upgraded to Lion? It worked fine prior to upgrading.

    http://support.apple.com/kb/TS1538

Maybe you are looking for