I'm new to Apple (MacBook Pro). Had a PC before. First day I had the new Apple, somehow I lost the return arrow to go back to an original page (if that makes sense).
First day I had my Apple I was on Craig's List looking at an item and somehow I deleted the return arrow to go back to the original list. So now when I'm on a site, there's no arrow to go back and I have to close and start all over. How do I get the return arrow that I believe is on the left side of the screen? I've never had an Apple, so all of this is new to me. Thanks! Jo
If I understand your question, you need to select View > Customize Toolbar from the Safari menu bar. Drag the back/forward arrows into the toolbar wherever you want them, then click Done.
You can also go back to the previous page by pressing command-left arrow on the keyboard.
Similar Messages
-
I have the new 2011 macbook pro, with lion preinstalled. I want to change the harddrive. I have backed up everything on time machine. when i put my new blank hard drive in will the lion screen startup.How do i get the lion dmg when i am already using lion
NicholasLiban -
When you use the Lion restore as described, it does a fresh install on the hard drive that you can select at the beginning of the process. This provides a complete install of the very latest version of Lion, including the recovery partition. The drive that you choose for the installation destination winds up like what you would have on a brand new computer from Apple.
- Randy -
My mother board had caps that were blown because I spilled coffee on the table and some got into the bottom vent of my computer. As a result of the repair, all my apps were gone and I am in the process of trying to get them back. I was easily able to get MS office back because I had the download receipt, but I don't know how to get iLife back. Any ideas?
If you purchased the machine new and it had OS X 10.7 or 10.8 on it, then you will have to talk to Apple because basically it's another machine as you likely had your logicboard switched, thus it has a different serial number and all AppStore software is copy protected and tied to your AppleID.
If your machine originally came with 10.4, 10.5, or 10.6, then you can try to see if those installers will work as the iLife is on the disks, or you can use Pacifist from Charlesoft to extract the apps and put them on your machine, then Software Update so the versions are current. -
I have a new MacBook Pro with OS X Lion 10.7.4. The DVD player does not have a feature to store film clips. Why? This is useful for my work and I had it on my older computer? Why the loss of capacity?
I cannot recall the DVD player ever being a place to "store" videos - it is simply an app to play videos.
If your machine is new, then iMovie should be included as the "shrunk" version of iLife is included with Lion (iMovie, Garageband, and iPhoto). However, iMovie is not a place to store videos either - it is a video editor. You import your clips and edit them in order to then burn to a DVD or share via a social media site.
Have you considered simply dragging the clips to your folder "Movies"? That would be a great place to just store them (please be aware that videos are usually large files, so keep your hard drive space in mind so you keep a minimum free and available for the OS to operate properly): -
hi i have the same apple id for my iPad and my mac. my iPhone has a different one. My i cloud on my mac seems to be the iCloud on my iPad, if that makes sense so its not sending my photos from my mac to the cloud. how do i change it to upload mac pictures instead? thanks
Did you go into Settings > Store and then tap your old ID, sign out and then enter your new ID?
-
When I updated my Macbook to LIon, I seemed to have lost apps on my iPhone. Does that make sense?
just re-download them.
-
I had Adobe CS3 products on my Macbook Pro. How do I prove this to get the Creative Cloud Complete $29.99 membership price on my new iMac?
https://www.adobe.com/account.html for your Adobe orders page to find your old serial number
-
I purchased my macbook pro 2nd hand and then purchased Lion online thru the apple store and today when I tried to update some of the software I got the message that it was corrupt. Can anyone help me?
Did the message say what was corrupt. It is not clear from your description of "...it was corrupt" what "it" is. Sounds like the download of Lion was corrupt. Download it again. Downloaded files sometimes get corrupted due to network connection glitches or interruptions.
-
Hey Dears, I was working with my Macbook pro 2011, then i have some flash light in the screen, so i shutdown the computer, when i try to open it again i had a black screen, so any one of you have any idea about what should i have to do ?
Can you start Firefox in [[Safe mode]] ?
You can also do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can initially skip the step to create a new profile, that may not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?
My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
And edit your mouse settings to do what you want it to do.
Secondly, this is not the place to vent. If you have a complaint, there is:
http://www.apple.com/feedback/
or http://www.apple.com/contact/
We are just end users here helping other end users.
Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
Good luck! -
I am thinking of getting my first Macbook pro for uni and was just wondering which one would be the best? The macbook pro or macbook pro with retina display? or even wait for the new release in 2013 ?
If your budget is unlimited, look at both the retina and non-retina and make a decision based on your preferences. If funds are tight, explore the options in the refurbished section. Unless you are dealing with courses that demand specific performance parameters, any one of these options will suffice.
Ciao. -
Hey guys,
This is the problem. My father just got an iPhone 5. He has a Macbook Pro 2009 with OS X 10.5.8. The iPhone is not compatible with this version since the iTunes is an older version as well. At our local Apple store in my home country, they told him he needs to upgrade (which I agree of) but that the memory of this computer is not enough to hold the newer OS.
Please help, he does not really agree with buying a new computer just because of the versions.
Thank you, I appreciate your help.This is what I have. Thank you so much rdr4lfe.
-
i tried transferring my iphoto library from my old macbook onto my new macbook pro (via external hard drive), but when i open the new iphoto, it seems to have transferred ALL images ever used on my old macbook. so i tried to just delete all those images so i could try a different approach to transferring, but the new iphoto won't let me do anything and every time i try to delete anything it crashes (since the image amount is so high). please help!!
MacBook Pro, OS X Mountain Lion (10.8.2), iphoto '11, version 9.4.2To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else. -
i bought my macbook pro 13" and i installed win(7 64bit) and the dvd of bootcamp came with my notebook and i installed it sucessfully but now i want to install win 8(64 bit) and i did but unfortunatley that dvd of bootcamp didnt work what should i do to install my bootcamp and apple software in win 8
thanks in advance,,,ahmad_uetlhr09 wrote:
i bought my macbook pro 13" and i installed win(7 64bit) and the dvd of bootcamp came with my notebook
Boot Camp does not come on DVD, what did you install. -
one of the key on my macbook pro is not working properly, can it be fixed by a cleaning spray or something. there is lot of dust in where I live and thought that might be the culprit. thanks Jason
Don't use any cleaning spray. Wipe with a moist but not wet microfiber cloth.
1. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own"
2.Reset PRAM. http://support.apple.com/kb/PH4405
Maybe you are looking for
-
VPN Access to an IP that can be accessed via EIGRP
I have a question. I have a VPN that sits on the external interface using the IP of 10.5.79.X/20. I have a production network connected to a corporate network using MPLS and EIGRP to share the routes. The production network can access the corporate n
-
How to assign a value of the bean to a js variable.
Hi, Im getting some values from the DB which is stored in a list , Now the list is sent across to the jsp through the bean. I need to get the length of the list I tried something like this. <script> var size = <% rmaLicenseTransferForm.slfex
-
BI Layout/Template | Table with dynamic number of columns
hi! i have a problem concerning the creation of a dynamic report with the BI publisher. in my BI template i need a table with a dynamic number of columns. i have searched the forums but havent really found a solution for this type of problem. first o
-
I am currently deployed to Afghanistan. As we do not have CDMA in this country, I cannot use my phone. If I suspend my plan, will there be any negative impacts? If I lose my unlimited data plan, I will definitely definitely definitely move my account
-
Time shift instructions & dummy variables
hello experts, i am new to bpc & script logic.(sap nw 7.0 bpc). i am trying to do 'time shift' values of the account dim. i've tried the keywords (next, prev, base etc) and i've tried the mdx format. (time = [time].currentmember.lag(n)) but i didn't