I'm picking up all of the data script related to the sending / receipt of an e-mail along with the e-mail itself and can't find a way of not showing the text. Obviusly only a command but can't find it!
I'm picking up all of the data script related to the sending / receipt of an e-mail along with the e-mail itself and can't find a way of not showing the text. Obviusly only a command but can't find it! Help!
Shift-Command-H is the key-combo to switch 'Long Header'/'Standard Header' .
Long way: Top Menu -> View -> E-Mail
Stefan
Similar Messages
-
How to print the text in only last but one page in sapscripts
hiiiiiiiiiii,
explian how to print the text in only last but one page in sapscripts? wher to write the code? plz if possible explain in detail with an example?Hello,
The total no pages is given by &SAPSCRIPT-FORMPAGES& command.
So u can handle the situation in ur form like this
/: if &PAGE& = &SAPSCRIPT-FORMPAGES&
p1 TEXT
/: endif
Try in this way it may help u.
Regards -
508- Document Properties - Disabled ..."All of the text on this page lacks a language specification"
Hi,
When i try to do 508 check. I got the following error message
"All of the text on this page lacks a language specification'
I checked "FILE=>Document Properties". All "Document Properties" are disabled.
We are using Adobe LiveCycle Designer ES2 to create this dynamic for and save it as static PDF file.
Still, we have same issue. I am not sure, how to change or setup the language in adobe livecycle designer es2.
thank you,Ah, I don't know that. "Tables" is a collection, not a simple array, and some careless experimentation shows that you cannot simply use .concat to paste them together.
I'm pretty sure I've seen a couple of workarounds for a situation like this. Perhaps it's time to read "[CS3][JS] everyItem() and getElements()" -- i.e. Marc Autret's blog posts about this, at the end of that thread.
That is, if you stick to using everyItem()! Perhaps it's easier to build an array "the old fashioned way". This code is based on my earlier assumption you had textframes-in-textframes, but you can rewrite it to cater for groups as well:
t = app.layoutWindows[0].activePage.textFrames.everyItem().tables;
tableList = [];
for (i=0; i<t.length; i++)
tableList.push (t[i]);
t = app.layoutWindows[0].activePage.textFrames.everyItem().textFrames.everyItem().tables;
for (i=0; i<t.length; i++)
tableList.push (t[i]);
alert (tableList.length); -
Added or ediited texts by Bluebeam Revu,and has been saved,when I open it by the Adobe reader version 8.1,why it does not show my texts added by Revu?8.1 is my favorite version,I also tried it in a later version fo Reader,it doesn't work too!
Bernd Alheit wrote:
Looks like a problem of Bluebeam Revu, not Adobe Reader.
The response above is only a speculative answer to the original question. DSI-Hal, did you try to flatten the text in Bluebeam Revu prior to opening it in Adobe. This has worked for me on several different documents but not sure if we are using the same version of Adobe Reader.
Give it a shot. Good luck. -
In ICal is there a way to see all of the text in all day events on the month view of the calendar? Seems to wrap text only if there is a time on the event
The paths won't agree on the two OSs so a simple XML import isn't likely to work.
See Sync iPod/iPad/iPhone with two computers and, if needed, Make a split library portable. The techniques in the first link will work when moving the library between Windows and OS X as long as the library is "portable", but iTunes takes quite some time checking the database when the library is opened under a different OS.
tt2 -
How would I be able to pull up all of the text messages tat were in my phone over the course of 2 years and back them up to my computer since my phone has a broken screen and can no longer read the mesages.
If the messages are stored on the device and you can power the device up you can use the application posted at https://community.verizonwireless.com/thread/770529 , the application has a screen capture option and you can use the screen as a guide to install MyBackup from Market or a number of backup apps from Market and then you can run the applications and backup data to your SD Card to restore to the replacement device.
-
How do I print all of the text in a scrollable form field?
How do I print all of the text in a scrollable form field? When I print the form, the text becomes cut off based on the size of the field and displays a little plus sign in the lower right hand corner indicating more text. I want to print all of the text.
The form is HTML which means what you see in your browser window is what you will see in your print out. You can, as the form author, view the submitted data in the View Responses tab and print that out. You can also export the responses to Excel, CSV, or PDF and print that out.
-
When I try to open itunes on my school network windows Xp computer I get an error message with this code 0x80092013. I have tried all of the suggestions from apple support document but nothing has worked.
Have you left the iPod to charge for a couple of hours and then tried resetting it again? It can take up to at least 30 minutes of charging before an iPod with a dead battery shows any signs of life. By a reset, I assume you mean pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear?
iPod won't turn on
B-rock -
How can I backup all of the texts on my iPhone to iMessage on my Mac?
I want to transfer every text on my iPhone, since the beginning of time, onto my Mac in an easily synced and accessible way. I want to use iMessage on my Mac to store all of the texts on my phone.
Eventually, I want to hold only a month/week's worth of texts on my iPhone to save space.Text (SMS) cannot be mixed with iMessage.
You can do a backup using iTunes where your SMS and iMessage will be included but you can't be selective on what you want to restore. It's all or nothing. Furthermore the backup cannot be read without a 3rd party tool.
Backup
iTunes http://support.apple.com/kb/ht4946 -
Firefox uses too much cache when commenting in Facebook - 45MB when the text is only 1kB - why?
Firefox uses too much cache when commenting in Facebook. I wrote a comment up to 1000 characters and my PC crawled. I had to wait several times for the text to catch up with my typing. I cleared caches after entering my comment and it freed up 45MB of RAM from the firefox.exe process in Windows Task Manager. Why does Firefox use 45MB when the text is only 1kB?
Another time the firefox.exe process began at 88MB and went up to 250MB whilst writing a comment, reducing to 170MB afterwards. Firefox hogs the CPU too (I tried the CPU hogging tips but none was the solution to this), but the memory usage is the issue because the CPU would not be hogged if less data was being moved or cached.
I accept some slowness on an old 1.2GHz 512MB PC but the facebook issue is much worse than other sites.Dheart wrote:
signor_rossi wrote:
schivmeister wrote:this is a flash issue
Of course it is, but there isn't much we can do about it, isn't it? Therefore I suggested firefox3, to alleviate things a little (it does it for me). Flash doesn't even work at all for me in Opera, I only get a grey window where the video should be.
Bye, signor_rossi.
The newest version of flash Plugin only works with Opera 9.5 beta. If you want to use flash with the stable Opera find an older version of the flash plug in.
Thanks for the hint, will keep that in mind in the case I will switch to Opera again (used it for a while because Firefox2 scrolling was bad, with 3 it is much better). Besides, there is a new flash version in the repos.
Bye, signor_rossi. -
I redirected iTunes to an external drive and moved my iTunes library and folder, but my hard drive is still low on space. How can I be sure that my music is all on the external HD ONLY, especially with the new iCloud technology? It doesn't look like I created any more space by doing this, AND I totally lost all my iTunes playlists. I'm not sure if because I added old library materials manually if this messed up my playlists, or if the new location is just not reading my moved library. In any case, I followed step by step instructions and found a few holes and thought I'd just "figure it out" but I guess I'm not as smart as I thought since I'm still scratching my head many hours later.
Thanks for any support ;-)
EaglerockerQuick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the option (alt) key (shift on Windows) so you get a prompt to select a library, then guide it to the 'iTunes Library.itl' file in the moved iTunes folder.
If this is to a new computer and you put the copied iTunes folder in the default location of Macintosh HD > Users > *User Name* > Music then you don't even need to start with the option key held down, iTunes will automatically look for it there. (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)
iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527 - a somewhat bewildering and not always easily understandable set of options. -
I have a new Iphone 5, my wife has a 4S and an iPod Touch. When I sync my new 5 to the Mac, it pick up ALL of the stupid game apps that my wife uses on her two devices. How can I keep them separate?
go to itunes preferences, store, uncheck automatic downloads. also when your phone is connected you can click on apps and only check the ones you want on your phone, go down to the bottom right and click apply.
-
I'm transferring my iTunes library from a PC to my new iMac via home sharing. I've followed all of the steps to "import" my library but the "import" button is greyed out. Any suggestions?
There is no need to import anything or use Home Sharing.
Copy the ENTIRE iTunes folder from the old computer to the new computer, everything will be exactly as it was. -
Is there a way to flip the pages in a .pdf so that all of the text is readable (in other words all documents are right side up)? I have Adobe Acrobat X and am using Windows 8.1.
I have a pdf with over 2,000 pages, many of which are sideways. I do not want to manually flip each one (few are next to each other). Is there a way to automate the function so that all sideways or upside down text pages are righted?
-
I installed Nik:s suite of plug-ins for LR5 but for some reason not all of them were installed. In the end I uninstalled all of the Nik programs from my Mac but before I reinstalled them I opened LR5 again to check. Under "photo" and "edit in" the plug-ins were still presented but no programs opened, of course. after reinstalling the plug-ins one of the programs appeared twice in the list but not the others. I´m going to reinstall them again and I´m wondering if there is anyway of erasing the links to the plug-ins under "photo" and "edit in" ???
Wow that was really quick, thank you so much. Im not sure at all which version it was because i said it was around 4 years ago he bought it. I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names. isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
sarucia
Maybe you are looking for
-
When viewing an email with multiple links, I would click an icon in the toolbar which looked like a vertical multi-colored bar and all the links would open on the same page. I cannot find this (add-on) now that I have downloaded the current version o
-
How to handle preceding space characters in file to file(FCC on both sides)
Hi All, We have scenario with file to file (FCC on both sides). Issue is: Sender side we are converting source file (CSV) into XML. But while converting it is ignoring preceding spaces. Example: Suppose Source file(CSV) contains one record as mention
-
E-mail alerts not working properly
I have a problem with my Tour which has put me in some awkward situations- like in court and work meeting- not good. The e-mail alert makes an audible noise even when the setting is programmed for silent. My original Tour worked fine at first, and af
-
Passing values from subreport to main report
Dear All, I have used shared values in my sub report and i want to use that shared variable in my main report in one of the formulas for average calculation but i see the values as 0. Can someone let me know what I am missing. Regards, Sonali
-
Can't drag contact's name to search box
I used to be able to drag and drop a contact's name into the search field in mail, but no more. Is this gone, or is there a setting I need to reset?