I'm running iTunes Radio on a WinXP PC with a KVM USB switch. With the latest iTunes update, iTunes Radio will no longer continue to stream when I switch to my work PC via the KVM switch. Can this be fixed?

I use a WinXP machine as a dedicated Music PC. I also have a separate "newer" PC to do work on. Each machine shares a Monitor, keyboard, and mouse through a KVM USB switch. I like to stream iTunes radio by starting iTunes on a selected station, then 'switch' to my work PC so that the Music PC will stream iTunes like a radio station through my Audio sound system. This used to work fine up until the latest update to iTunes. Now, when the Music PC detects the KVM switching to the other PC (basically a system hardware disconnect detection), iTunes will stop. Can I turn this 'hardward detection' issue off in iTunes?

Check your i tunes version on the PC. you need the most recent version.
Other potentials -
try a different usb port,
try a different cable.

Similar Messages

PSE 10 installed on windows 7 desktop and recently updated on windows laptop. now PSE doesn't work on either machine. How can this be fixed?

PSE 10 installed on windows 7 desktop and recently updated on windows laptop. now PSE doesn't work on either machine. How can this be fixed?

uninstall pse 10 (properly using the adobe uninstaller).
clean - Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
then try reinstalling using the adobe installation file(s).
if you see an activation count error while trying to reinstall contact adobe support, https://helpx.adobe.com/contact.html
and ask for an activation count reset.

HT4623 After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.

After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.

IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost

Mac OS X 10.6.8 desktop goes black 10 secs after booting, can remain apparently asleep for 15 mins. I can't prompt it to wake, until recently it would wake when peripheral were added (earphones). What is wrong, and how can this be fixed?

Mac OS X 10.6.8 statup problem: desktop goes black 10 secs after booting, can remain apparently asleep for 15 mins. I can't prompt it to wake, until recently it would wake when peripheral were added (earphones). What is wrong, and how can this be fixed?

You need to fresh install 10.6, programs fresh form original sources and return only vetted files (no TM migrations) from a regular storage drive
But this when erasing the drive use the Security Option: Zero All Data before installing 10.6
What has happened your data got corrupted and it's corrupted on the TM drive too.
So the Zero will map off bad sectors on your drive, the 10.6 install will be fresh, the programs will be fresh and only files will be returned, you'll find out in short order which ones they are.
Reducing bad sectors effect on hard drives
How to erase and install Snow Leopard 10.6
Once you are back up, then consider making a option key bootable clone.
Most commonly used backup methods explained

Hi, App Store tells me I have installed the latest Pages update, yet it will not open Pages docs created on other machines that DO have the latest version . Any tips?

Hi, App Store tells me I have installed the latest Pages update, yet it will not open Pages docs created on other machines that DO have the latest version . Any tips?

Hi
Pages 5.0 and 10.9.
While App Store tells me there is no update avalable to Pages, which it says was installed Nov. 4, its the old Avatar/logo thingo and, as I say, it will not open the Pages docs created on my MacBook, which definiitely does have the new Pages running smoothly.
cheers

In the process of the latest os update my computer will not restart or be started--is dead

In the process of the latest OS update my computer will not restart or be started.It is dead. HELP

sueellen1954,
which model Mac do you have?

Power button not working on iPod Nano 6G. Can this be fixed?

The power button on my nano seems to be stuck. Can this be fixed?

It was bought in april, it was an ex-display came with the one year warrenty but we don't know where the receipt is. Can't it be taken to the apple store without one?

I can't download the latest Iphone update to my iPhone 3Gs. A error box saying "a network connection error has occurred try again later". Can anyone help?!

I haven't been able to download the latest iPhone update iOs 5 to my iPhone 3Gs and a network connection has timed out error notification has popped up the 4 times I have tried to download it. I have tried a diagnostic test on my itunes and nothing appeared to be wrong. Has anyone else had this issue or can help me out?
Cheers

Try a manual install, as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Installed the latest iPhone update, iTunes asking to restore the iPhone

I bought the Nike sensor and iTunes asked to install the latest iPhone update, so I did. Computer crashed (blue screen appeared) - turned it back on, plugged the iPhone in and iTunes asking to restore the iPhone. It starts the restore process and than blue screen appears again. Now the iPhone doesn't work - tried to reset it. It says to connect to the iTunes, but every time I do this the computer crashes (blue screen). Help!!!

Agree with the above: Computer issue, the Windows Blue Screen of Death (BSOD).
I'd take it to an Apple store with an appointment per
http://www.apple.com/retail/geniusbar/
Phil

Since latest update I get I Tunes Library .itl cannot be read because it was created by a newer version. How can this be fixed.

Since the latest update I can't open I Tunes and get "I Tunes library .itl cannot be read because it was created by a newer version. How do I fix this. I have Windows 7. I have no idea where to find the libraries or anything. This happened on my desktop.
Help me please.

See Empty/corrupt iTunes library after upgrade/crash.
tt2

I have a 2nd gen ipad. Since the latest ios update my ipad will not charge when hooked up to my computer running windows 7 and even though it shows that it syncs in Itunes, it will not download any apps. It just seems to skip that part.

I went to the apple store and they hooked up my ipad to a mac and it showed that it was charging and that apps would download. My ipones, touches, and ipods are not having any problems, just this ipad. It seems to be since I updated to the new ios. You can't even do a restore on it because it doesn't recognize it. It shows up top that it's doing that but nothing happens on the ipad. The computer seems to recognize the ipad, itunes recognizes it. It acts like it is communicating with it but it doesn't download anything and won't charge when it's hooked up to the USB port. THe Apple store says there is nothing wrong with this ipad which is about 6 mths old. So what now?

Most USB port do not supply enough current to charge the iPad.

After having updated my iPad with the latest OS update no apps will work.

When I press any app icon the app opens up for half a second and then shuts down again. Can anyone tell me why this is and what to do to fix it?

Try downloading any free app. That seems to sometimes reset something. If you don't want the app you can delete it.

Itunes will no longer see my phone when plugged in... worked fine before update. any clues?

I have tried unplugging, rebooting, etc. anyone have any ideas??

Howdy there On The Road,
It sounds like your iTunes is becoming unresponsive when you plug in either your iPhone or iPad. A number of things can cause the issue, and I have a great troubleshooting article for you to use:
iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
http://support.apple.com/kb/ts3219
Thank you for using Apple Support Communities.
All the best,
Sterling

TS1538 Since updating itunes to latest version, my ipad, iphone will no longer sync

Since updating itunes to the latest version, my ipad, iphone will no longer sync

Update your Mac OS X to v10.6.8
Click your Apple menu (top left in your screen) then click Software Update....

I have an iPhone 4 still running 6.1.3 software. A few days ago it stopped working through my car's USB connection. How can this be fixed?

I have an iPhone 4 still running 6.1.3 software. A few days ago it stopped working through my car's USB connection (I have a 2010 Honda Civic Hybrid). I can no longer control my music through my car's stereo system. I am unable to choose what song, album, playlist, etc. to be played and cannot skip songs. When I try to skip, it reverts back to the first song. When I choose what to be played directly on my phone, it can only be played for about 30 seconds through my car's stereo system before it stops and displays the message "Unsupported Version." How can this be fixed? (Also, I know it is my iPhone and not my car because someone I know has the same exact car as me from 2009 and it did the same thing on theirs.)
Any help would be greatly appreciated. This problem is extremely frustrating and the alternative of trying to change music directly on my phone while driving is a risk I am not willing to consider. Thanks!

Alright, sorry for not having browsed this page a bit more before stating my question. I have just found some other similar topics on this problem. Please don't reply this thread unless there actually is a solution to the problem, because at current time there is not.

I'm running iTunes Radio on a WinXP PC with a KVM USB switch. With the latest iTunes update, iTunes Radio will no longer continue to stream when I switch to my work PC via the KVM switch. Can this be fixed?

Similar Messages

Maybe you are looking for