I'm sorry if this apperas multiple times I'm new to this forum.
Ok again, I am a graphic designer and recieved a project via email. I use IllustratorC3 and she uses C6. She did download this project off the interent however. The first time she sent the project it would not open or if it did I lost lots of data. I even copied onto my desktop and tried to open illustator then open the project, that's when it opened but I lost data. This last time she sent it the project seems to start to open like it's in command line but then closes and nothing happens. I did a search for my AIRegTool.exe on my harddrive with no success. I also have looked on line for a download with no success, any suggestions? This could be a really big project in the longrun, I really need some help, thanks.
The full price for CC subscription is about $50 per month ($600 a year). Lower if you have a legal copy of CS3 or above. For that you get access to all the software that used to be in the Master Suite plus more, Lightroom and Adobes iPad/iPhone apps, 20 GB cloud space to share your work and a Pro Account at Behance. This is the price for North America. Where I live we have to pay double this amount but these are the tools we use to make our money.
I think, without meaning to start a heavy discussion about CC subscriptions that even a freelancer only needs to charge 1-2 hours a month to pay for the subscription and has, if he has used legal software and is upgrading to every version, already paid similar amount per month if the cost is devided into months. I also belief that everywhere software used in business, small or big is deductable for tax.
Similar Messages
-
My iPod Touch keeps displaying the message 'This accessory not supported by iPod touch.' When I've used it w/this device multiple times, it's happening more and more frequently now. Anyway to dismiss this message for good? Because the iPod still plays thru my radio and system.
That message is usually due to a bad cable.
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
If you can’t charge your iPhone, iPad, or iPod touch
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
or send it in to Apple. See:
Service Answer Center - iPod -
I can go into chrome without any issues and watch any video without any problem. the second i get into firefox nothing works. i have had this issue on and off for years. i really do not see why you cannot fix this if everybody else can. i have uninstalled and reinstalled firefox and flash player multiple times. nothing seems to work. I am truly getting really tired of this same problem year after year, i stay with firefox because you are privacy conscience and are being more so consistently. i do not know what other details to tell you other than this just keeps happening and it is making it very tough to do anything on firefox when i cannot use a simple thing such as flash player. as i said, if the other browsers can fix this i see no reason why firefox cannot year after year. i hope there is a simple fix for this problem because it has basically halted a lot of my work on the net as i will no longer use google or microsoft. thank you
Firefox does not play videos. That is the job of the plugins.
Security Issue: Update your Flash Player '''v16.0.0.305<br>https://www.adobe.com/products/flashplayer/distribution3.html'''
If you have problems with current Shockwave Flash plugin versions then check this:
* see if there are updates for your graphics drive drivers
'''https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration'''
* disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
'''https://forums.adobe.com/message/4468493#TemporaryWorkaround'''
* disable hardware acceleration in the Flash plugin
'''https://forums.adobe.com/thread/891337'''
See also:
* '''http://kb.mozillazine.org/Flash#Troubleshooting''' -
I need to update my iPad 2 to the latest operating system. When I open iTunes it says that I can do this. I start the download and update. When it's done it says it failed due to the system time out. What does this mean and how can I fix it?
disable your anti-virus and firewalls and try the update again.
-
We're Sorry
Firefox had a problem and crashed. We'll try to restore your tabs and windows when it restarts.See:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.com/kb/Firefox+crashes
*https://support.mozilla.com/kb/Firefox+crashes+when+you+open+it -
So for some reason my old iTunes account appears in my app store when trying to update my apps, and of course Apple won't let me update apps unless I sign in.
Unfortunately there's no way to change accounts on the iphone. The account that appears in my settings tab is the right account, and signing out from that account and re-signing in has no impact on the app store account.What version of iOS do you have on your device?
In iOS 6 if your iPhone is signed in to your Apple ID you will not be asked for a password to update apps. Apps purchased with are virus ID will require that Apple ID and a Password.
Seems best to use one and only one Apple ID on a device. -
As per title we cannot get more than 30secs even from a previously downloaded series we had watch in Dutch west indies before why? Audrey
As per title we cannot get more than 30secs even from a previously downloaded series we had watch in Dutch west indies before why? Audrey
-
How can I have use the same div ID multiple times on the same page?
Okay so a problem I encounter a lot is that often times I want to use the same div ID several times on the same page. An example of this is when I'm creating table like designs.
Let's say for instance I create a div ID called 'product-container'. I want to use 'product-container' multiple times on the same page but if I do this it is improper XHTML and will throw errors in any XHTML validator (you are only allowed to use a div ID once on any XHTML page in order for it to be standards compliant).
Now the first option is that I could define 'product-container' in my CSS style sheet multiple times by doing something like this...
#product-container {
width: 300px;
#product-container-2 {
width: 300px;
#product-container-3 {
width: 300px;
#product-container-4 {
width: 300px;
What you will see there however is that it seems pointless to define the same ID numerous times over (just adding a number on the end) when each ID is the exact same thing and has the exact same attributes.
Now what I have noticed is that there are some sites out there who manage to have the same ID appear several times in the code but add a number to it just like above. The difference is that they only have one definition for 'product-cointainer' in their CSS document but in their actual XHTML code they have IDs for 'product-container' but with numbers on the end like 2,3,4,5, etc. It's almost as if JavaScript or some other code is automatically appending a number on the end of the ID so the validator won't consider the markup to be invalid, but yet it knows that it's using the same 'product-container' style that is contained in the CSS style sheet.
I hope I explained this correctly. I'm just hoping to find a way that I can put the same div ID on a page multiple times without having to define it over and over again in my CSS.
Any help is much appreciated!Because it seems like by using a class you can't make this position as
well as you can by using an ID. Am I wrong?
An ID name can be used only one time per page. A class name can be used multiple times per page.
.product {
width: 300px;
text-align:left;
color: #FF0000
border: 2px solid #666;
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com -
A single photo in Aperture smart album shows multiple times on Apple TV2.
Sometimes a random photo in my Aperture smart albums displays on my ATV2 multiple times..can I fix this? For example, currently a single picture shows up on the Apple TV in the photos taken "in the past week" smart album 124 times, and the same picture shows up in the "in the past month" smart album 15 times.
When I double check the picture in the original smart album on the computer, it appears correctly, i.e. only one time.
Suggestions?I'm having the same problem. I deleted all the photos in the photostream then tried to drag a couple new ones in to see if they'd synch. Nothing is happening. I recently installed aperture (have about 125 gb in the library). If anyone has an idea what to do, i'm open to try something.
-
AssignedTo showing multiple times on report
I was tasked with creating some reports from Service Manager using the cubes. My boss wanted a report that showed all active tickets, showing from high to low the analyst, then the category, then the user.
I used the following Fields:
IncidentStatusValue in the Column Label
IncidentDimCount in the Values
AssignedToUserDim.DisplayName, IncidentClassificationValue, and AffectedUserDim.DisplayName in the Row Labels.
The report looks exactly as I want it to.
The problem is that the data is wrong on several levels.
Issue 1: It shows multiple entries for the AssignedToUserDim.DisplayName
I changed the names, but if I click on the number 1 next to Joe User(Affected User) for either Analyst1 or 2 a tab open with IR48005. Basically the two analyst both show an active ticket assigned to them, when only one of them should.
Issue 2: The Grand Total that is calculated by the PivotTable is incorrect. I copy and paste the same numbers into the cells next to the PivotTable and the total is something completely different.
The weird thing about this also is that when I did this 20 minutes ago before writing this post, the Autocalc showed 130.
The first issue is more important than the second issue. It is not just this report and I have tried using many different values only to get the same duplication. Its almost like the DataWarehouse is not actually deleting the previous AssignedTo
user. The history in the actual ticket shows that it should be, but the reports show something different.
This then throws off every report I try to make. I made one for totals tickets per analyst and I noticed that I got credit for closed tickets that I had previously reassigned, as did the person who the ticket was reassigned to.
Can anyone offer any suggestions?
Thanks.
MattUnfortunately no. But I think I found a pattern in regards to this: it seems the current assigned to user is always the one listed the last.
I guess this is because the stored procedure behind the AssignedToUserDim doesn't filter if the relationship is still active. This is quite easy to "reproduce" via PowerShell.
Lets say you have an IR with ID IR1234 which has been re-assigned multiple times.
If you run this small query now in PowerShell you'll see that all the AssignedToUser relationships still exists, but only one of them has the property "IsDeleted" set to False.
Import-Module SMlets
$IRO = Get-SCSMObject -Class (Get-SCSMClass System.WorkItem.Incident$) -Filter "Id -eq IR1234"
Get-SCSMRelationshipObject -BySource $IRO | where {$_.RelationshipID -eq "15e577a3-6bf9-6713-4eac-ba5a5b7c4722"}
So, in the DB those AssignedToUser relationships (actually it applies to all relationships) won't be "overwritten" or the old one deleted as soon as you re-assign an incident for example. Instead, new relationshipobjects will be generated and the old ones
changes the "IsDeleted" attribute to True.
Perhaps it would be possible to create a new Dim for the Data Warehouse, re-use the stored procedure for the AssignedToUserDim and modify it slightly to filter only for the active AssignedToUser relationship. Then you could use your newly created dim to
display the current Assigned To User. I haven't tested this though, probably it's more complex than I assume :)
Cheers
Alex -
How can I prevent deleted mail from ending up in "All Mail" and "Archives"?
To my horror, I emptied these boxes and lost all my mail from all my boxes .
All mail also disappeared from my iPad, I suppose because they are "synched"
(Also, no offense, but why do I need to enter this question multiple times?)
Thanks for any thoughts.I'm having a similar but slightly different problem. My company just migrated to Gmail, and it's saving mail drafts every 30 seconds into my Trash folder.
I unchecked the "Show in IMAP" preference in the Gmail settings, but my Drafts folder completely disappeared. I went back and checked it and the folder reappeared (with my drafts still in there).
I like the idea if starting an email on my laptop and having the option of finishing it on my iPhone or iPad, so only saving Drafts locally would not be ideal. -
Calling a vi multiple times makes the timer "crash"
I use a subvi for writing data from a profibusnetwork. In this vi I can set a timer for the "update" to write away the data. I use a global variable to remember the last time the writing was done. The problem I encounter here is that when I use this subvi multiple times only the data I want updated fastest will be written away.. My question is: Is it possible to use just this one vi multiple times instead of renaming it for every datasource I want to write away?
Thx in advance,Use a while loop with an uninitialised shift register instead of a global,
and build it into a function marked "re-entrant". This way different data
exists in each different copy of it in the code.
henk007 wrote in message
news:[email protected]..
> I use a subvi for writing data from a profibusnetwork. In this vi I
> can set a timer for the "update" to write away the data. I use a
> global variable to remember the last time the writing was done. The
> problem I encounter here is that when I use this subvi multiple times
> only the data I want updated fastest will be written away.. My
> question is: Is it possible to use just this one vi multiple times
> instead of renaming it for every datasource I want to write away? -
Rendered Property calling managed bean Multiple Times
Hi
We have a problem within a command button in a jspx, which includes a rendered tag which references a managed bean method via EL.
e.g.
rendered="#{PERUserInfo.trainee}"
When I debug the jspx, the PERUserInfo.trainee method is called 4 times instead of once.
We have noticed similar findings when using managed bean methods via the rendered property. i.e. calls getters multiple times.
Any idea why this is happening?
We are using JDeveloper v10.1.3, JHS v10.1.3 SU1.
All comments appreciated.
Cheers
DenisDenis,
There can be many reasons why your bean method is called multiple times; but I would consider this perfectly normal in any JSF application considering all the lifecycles and (possible) Partial Page Rendering that happens.
The question is, by the way, more appropriate on the JDeveloper forum since it is not directly related to JHeadstart itself.
Hope this helps,
Evert-Jan de Bruin -
ADF Faces Tree - getChildren() called multiple times
Hi,
I have a simple tree based on the demo's 'tree.jspx'. Each time I click on a node in this tree, I see that TreeNodeImpl.getChildren() gets called multiple times for each node. This is not an issue in tree.jspx where the tree is static. However in a case where tree is constructed dynamically based on the back end state, it is going to hurt performance. Each getChildren() call then invokes backend methods which could be remote. So multiple getChildren() will invoke backend methods multiple times.
Is this behavior of calling getChildren() multiple times per node a bug? Is there any way for me to avoid it?this is expected behaviour.
Your tree model should cache data and prevent the multiple calls to the back end. -
Lost Favorites - multiple times
Every once in a while I open Skype and my list of favorites has disappeared. This happens without any rhyme or reason. No, I haven't re-installed Skype, I am not using a different computer, I have made no changes what so ever. It has happened more than once, and always without anything to explain it.
I know I can re-add them manually but, could someone stop them from disappearing? And stop the layout of the window from also change at random, from one day to the next.
By the way, I also had to google "ask question skype" to get there. No way to find this in the Skype site - major oversight, wouldn't you say?
Thanks.I've had my custom contact lists become empty multiple times. I wonder if this problem is related to the one you've seen with the favorites...
http://community.skype.com/t5/Mac/Custom-contact-lists-are-now-empty-except-for-Skype-users/m-p/3960...
Maybe you are looking for
-
Just loaded latest iTunes update and now it won't open i get a message eror MSVCR80.d11 followed by error 7 Windows error 126, anybody help?
-
Applications closes browser when using firefox.
I've installed firefox and I'm trying to access applications, but when the initial menu is displayed the browser closes. I also tried using the following url : http://<hostname:port>/dev60cgi/f60cgi and the same thing is happening. Has anyone seen th
-
HT4623 Can you remotely access your ipad? my ipad was stolen and I'm trying to locate it
Can you remotely access an ipad? My ipad was stolen and I'm trying to locate it.
-
Hello World Tutorial not working. processFormRequest not called
In 9iJDeveloper when running the HelloWorld tutorial, I enter a value in the 'Hello' box, and press 'Go'. The page refreshes, but the value entered does not get displayed. No Information box is displayed, as it should according to the tutorial. So, I
-
Using maverick and adobe flash player?
Working on Maverick and can download flash player but then anytime I try to use it, computer says I do not have flash player. Any suggestions?